From insolvency: ESS Pulsarc 350 Year of construction 2008 with feed case DVK 400 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Pulses Welding range 40-350Ampere Duty cycle at 100% 300Ampere at 60% 350Ampere with 4meter torch, ground cable and a roll of Drahr 1.0mm----without pressure reducer
From operating resolution: ESS Squarearc 356 C Year of construction 2011 AC/DC Welding range 5-350 amps Pulse function HF Ignition Water cooling 350Amps at 60% ED complete, with 6meter burner, ground cable and pressure reducer Dimensions in mm approx. 980x450x930 --Very neat device-
From insolvency: ESS Synmag 4000 Year of construction 2007 with feed case DVK 5000 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Welding range 40-400Ampere Duty cycle at 100% 240Ampere at 60% 300Ampere with 4meter burner, ground cable --without pressure reducer--
Machine type: Fully automatic TIG welding system with turntable Manufacturer: ESS Model: 211 DTG / DT50 / PS 8 Year of construction: 1999 Condition: very good Type of offer: used machine Specifications: Control: Control unit: ESS PS 8, Pulse remote control FSP 100 Table: swivelling turntable Type: DT 50 Diameter: 300 mm Load: 50 kg Speed range: 0.43 – 13.0 rpm. Drive: 3 – 205 Amp. / 230 V, automatic ignition Remark: with three-jaw chuck and various accessories, Complete documentation The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.
- Adjustment range: 3 - 225 A - TIG open circuit voltage: 90 V - Total power: 6.5 kW - Machine weight: 84 kg - Space requirements (W x D x H): 0.83 x 0.46 x 0.64 m Details with cooling, additional foot switch Accessories Documentation, ground cables
DC TIG shielding gas - welding system Sweat strom_ 40 - 360 Amp. Incl. cooling system, ESS type: KG 1, good hose package, fitting, various new 2 mm needles, various new ceramic nozzles and rolling chassis. Power supply: 380 Volt, 32 Amp. Weight: approx. 120 kg. Freely loaded from stock. Good operational condition. Without bottle. The system can be inspected and tested under electricity and is immediately available. Shipping with forwarding agency possible by arrangement. Please also note my other entries.
ESS 220 WS Wig only suitable for aluminium as it is a pure verk-stream device Elktroden welding machine 230 and 400Volt possible Size 500 1000'700mm Technical data see pictures
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding turntable ESS type DT 50Fabr. No. 86 / 1125 Year of construction 1986Load max. 50 kgFace plate diameter 300 mmFace plate speed 0.19 to 5.7 rpm. Control voltage 24 voltMotor power 100 wattsMains connection 220 volts, 50 Hz.- Face plate in the position infinitely variable swivel by 180- Speed control via rotary potentiometers- Clockwise, counterclockwise rotation- Foot switch- 2-stroke and 4-stroke operation- Sliding contact for the mass up to 200 Amp.- New control ESS PS3 from year of construction 2009Space requirement L x W x H 600 x 500 x 350
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-
TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-
Welding turntable ESS type DT 50 Fabr. No. 86 / 1125 Year of construction 1986 Load max. 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm. Control voltage: 24 volts , motor power: 100 watts , mains connection: 220 volts, 50 Hz. - Face plate in the position, infinitely variable swivel by 180 - speed control via rotary potentiometers , clockwise, counterclockwise , foot switch , 2-stroke and 4-stroke operation - sliding contact for the mass up to 200 Amp. - new ESS PS3 control system built in 2009 , space required L x W x H 600 x 500 x 350 mm , weight 45 kg , very good condition; used
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)tig Welding Machine Fabr. No. 0907036 Year of Manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Power Connection 230 Volt, 50 Hz. - DC and AC welding - HF- ignition - infinitely variable power adjustment - 2-stroke and 4-stroke welding operation - operating mode pulse welding - operating mode rod electrode - 8 meter hose package with TIG torch - inert gas pressure reducer - fan cooling - portable space requirement welding machine L x W x H 400 x 270 x 500 mm weight 26 kg very good condition; used
TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding Machine Fabr. No. 0507214 Year of Construction 2007 Power ED 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Power Connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - operating mode pulse welding - operating mode rod electrode - water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space required L x W x H 1000 x 450 x 710 mm weight 90 kg very good condition; used
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding turntable ESS type DT 50 Fabr. No. 86 / 1125 Year of manufacture 1986 Load max. 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm. Control voltage 24 volts , motor power 100 watts , mains connection 220 volts, 50 Hz. - Face plate in the position, infinitely swivelling by 180 - speed control via rotary potentiometer - clockwise, clockwise rotation, foot switch - 2-stroke and 4-stroke operation - sliding contact for the mass up to 200 Amp. - new control ESS PS3 from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition; used
TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Fabr. No. 0907036 Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. • DC and AC welding • HF ignition • Infinitely variable power adjustment • 2-stroke and 4-stroke welding operation • Pulse welding mode• Rod electrode operating mode• 8 meter hose package with TIG burner• Inert gas pressure reducer • Fan cooling • Portable Space requirement Welding machine L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition; used
TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) TIG Welding Machine Fabr. No. 0507214 Year of construction 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - pulse welding mode- rod electrode operating mode- water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space requirements L x W x H 1000 x 450 x 710 mm Weight 90 kg very good condition; used
