One used EVG LGR wire mesh welding lines for the production of fencing mesh and industrial mesh mesh width: min 500mm and max. 2.150 mm mesh length:min 600 mm and max. 3,000 mm cross wire separacion: min. 12.5 mm and than steplessly line wire separacion: min. 25 mm and than steplessly Working range: min. 2.0 mm and max. 6.0 mm No. of line wires: 52 pc Production speed: 150 cw/ min intalled power at 50%ED: 840 kVA Stacking height: max. 600 mm
One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well
used
Year of manufacture 22, Technical data: single wire 6-16 mm, double wire 2x2 - 2x12 mm, bending angle +/- 200 degrees, wire feed via driven roller straightener, roller straightener in 2 planes with 24 straightening rollers per wire track, electrically driven bending head - right and left, hydraulically confirmed shears for maximum cutting sequence in the production of small brackets, automatic wire changing device DW X, heated hydraulic system for winter operation, micro-process-controlled additional device for PBX automatic ironing machines for automatic bending of the second end hook of ironing rods that have already been pre-bent on one side, 3 D Bending Unit - Bending Head
One used Automatic binding unit Comprising a left and right unit; automatically binds the mesh stack and Automatic mesh stacker Stacks bound mesh packages and 20m Scooter Convoyer
used
automatic lattice girders, Fabr. ECG for standard and special carriers = for the production of standard and special carriers of medium to small series. - Length of beams: min. 0.8 to max. 16.0 m - Width of beams: 70 - 116 mm - Height of the beams min. 70- max. 400 mm
One used EVG TSD double step welding line for the production of standard truss girders (e.g. decking girders) in large to mid-size series
One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series
Used Rebar Bender Basic information Manufacturer: EVG GmbH Model: Polybend PBC 2-16 A Year of manufacture: 2005 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Additional information - synchronised pay-offs, - pullingling winch, - portable wire straightener, - It processes: double strand Ø6mm-12mm single strand Ø6mm-16mm
One used state of the art high performance mesh welding line ECG: a. Complete system with up to 70 pcs spools (each 3 t ) b. Machine is fully equipped with up to 24 longitudinal wires c. Production speed up to 280 cross wires per minute or also a production capacity of 90 t per 7.5h d. Siemens S7 technology e. This line even has an automatic mat bundle tying system, i.e. fully automatic tying of the finished mats into a bundle and an automatic mesh paket stacker. f. Roller conveyors up to 20m in length to transport the finished packs to the storage area. g. Spare parts package possibly included
Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.
Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.
