Key data: 1100 kN
Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Metrics: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offered ...
Key data: 1500 kN
Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...
Key data: 1100 kN, 160 g/PS, 40 mm
Technical details Clamping unit Clamping force: 1100 kN Stand spacing (h x v): 470 x 470 mm Passage: 550 mm Min. mould height: 250-450 mm (variable) Maximum distance: 800-1000 mm (variable) Hydraulic ejector travel: 150 mm Injection unit Screw diameter: 40 mm Spray pressure: 2240 bar Spray volume: 201 cc Electrical and hydraulic data Pump motor: 22 kW Heating: 12.7 kW Heating zones: 4+1 Oil Fill(l): 290 Sizes and Weight Sizes (LxWxH): 5.0 m x 1.6 m x 2.0 m Weight (without oil): 5600 kg Accessories - Complete manual with hydraulic and electrical diagrams, parts list - Machine feet with anti-vibration insert - 1x core pull - 1x pneumatic valve - 12x mold heating control - 8 x water distributor for the tool -Robot
Ferromatics Milacron Type: K-TEC 85-S Vtryskarka (85 tonowa) Numer seryjny: 522500 Rok produkcji: 2008 Masa maszyny: 5500 kg Średnica ślimaka: 25 mm Siła zamykania: 850 kN Godziny pracy: 24.386h.
Ferromatics Milacron Type: K-TEC 110D-S Hydrauliczna maszyna do formowania wtryskowego tworzyw sztucznych (110 tonowa). Numer seryjny: 525304 Rok produkcji: 1999r. Siła zamknięcia: 110 T Średnica ślimaka: 40 mm Prześwit między kolumnami X: 470 mm Prześwit między kolumnami Y: 470 mm Objętość wtrysku: 201 cm³ Gramatura wtrysku: 171 g Specyficzne ciśnienie wtrysku: 1568 bar Godziny pracy: 78.763h.
FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...
Key data: 8000 mm, 2 , 90
Screw diameter: 90 mm Stroke volume: 2,545 cm³ Injection weight in polystyrene: 2,188 g/hp Injection pressure: 1,917bar Clamping force: 800 t Lights Tiebar spacing H x V: 1,400 x 1,080 mm Tool installation height min./max: 400/1200 mm Opening distance: 2,250 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german FHK interface for robots: Yes Core pull: 6 Pump drive power: 130 kW installed heating capacity: 55 kW Total weight: 40,000 kg Dimensions L x W x H: 9.9 x 3.1 x 2.9 m Payment terms: 100 % before taking over the machine, net only
Key data: 300 mm, 26 , 22
Screw diameter: 22 mm Stroke volume: 29 cm³ Injection weight in polystyrene: 26 g/hp Injection pressure: 1,939 bar Clamping force: 30 t Lights Handlebar spacing H x V: 300 x 300 mm Tool installation height min./max: 150/ 350 mm Opening distance: 250 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: EM67 Core pull: - Pump drive power: no installed heating capacity: 4.9 kW Total weight: 2,700 kg Dimensions L x W x H: 3.5 x 1.3 x 1.9 m Payment terms: 100 % before taking over the machine, net only
Key data: 1550 mm, 158 , 35
Screw diameter: 35 mm Stroke volume: 173 cm³ Injection weight in polystyrene: 158 g/hp Injection pressure: 2,445 bar Clamping force: 155 t Lights Tie bar spacing H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening distance: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 0 Pump drive power: no installed heating power: 13.1 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Payment terms: 100 % before taking over the machine, net only
Key data: 1100 mm, 140 , 35
Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 1,943 bar Clamping force: 110 t Lights Tiebar spacing H x V: 420 x 420 mm Tool installation height min./max: 150/ 480 mm Opening distance: 350 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: no installed heating power: 11.2 kW Total weight: 5,500 kg Dimensions L x W x H: 4.6 x 1.6 x 2.0 m Payment terms: 100 % before taking over the machine, net only
Key data: 500 mm, 26 , 22
Screw diameter: 22 mm Stroke volume: 29 cm³ Injection weight in polystyrene: 26 g/hp Injection pressure: 1,939 bar Clamping force: 50 t Lights Tie bar spacing H x V: 320 x 320 mm Tool installation height min./max: 150/ 410 mm Opening distance: 260 mm CONTROL: Mosaic Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 1 Pump drive power: no installed heating power: 4.8 kW Total weight: 3,200 kg Dimensions L x W x H: 4.0 x 1.6 x 1.9 m Payment terms: 100 % before taking over the machine, net only
Key data: 3500 mm, 824 , 60
Screw diameter: 60 mm Stroke volume: 905 cm³ Injection weight in polystyrene: 824g/hp Injection pressure: 2:300 bar Clamping force: 350 t Lights Tiebar spacing H x V: 710 x 710 mm Tool installation height min./max: 300 / 900 mm Opening distance: 1:000 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 75 Kw Total connected load: 106.0 kW Total weight: 16000 kg Dimensions L x W x H: 6.8 x 2.2 x 2.6 m Payment terms: 100 % before taking over the machine, net only
Key data: 600 kN, 35 mm
Machine in good condition, ready for production, IQT33 control, English, German, Hungarian display, 60 T clamping force, 355x355 mm column spacing, smallest and largest sheet metal spacing (tool height) adjustable by changing the push pins. The 265 injection molding unit is equipped with a 35 mm screw and can deform 135 cm3 of material. The highest injection pressure is 1964 bar. Tested, production-ready machine with brand-new hydraulic pump. Other machines from the plastics industry are also for sale.
Key data: 1500 kN
Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...
FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...
Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net
Ferromatik Milacron K-TEC250S injection molding machine for PET preform -Model : K-TEC250S -Manufactured year : 2006
full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...
Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930
Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12
Closing unit Clamping force t: 200 Opening path mm: 750 Holm size mm: 560 x560 Installation height min/max mm: 300 Plate size: 830 x830 Spraying unit Screw diameter mm: 60 Spray weight gr: 540 Spray volume cm3: 636 Spray pressure bar: 1575 Dimensions and weights Dimensions LxWxH m: 6.6 x 1.8 x 2.1 Machine Weight Kg: 10200 Other Battery Euromap12
Ref. no.: 17765 Producer: FERROMATIK MILACRON Year of construction: 2007 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
Ref. no.: 17766 Producer: FERROMATIK MILACRON Year of construction: 2008 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
