Spare parts for injection molding machines Spare parts electric ferromatics Ferromatics B&R DI 476 3D476.6 Ferromatics B&R AO 350 3AO350.6 Ferromatics B&R DO 480 3DO480.6 Ferromatics B&R AT 660 3AT660.6 Ferromatics B&R DO 479 3DO479.6 Ferromatik B&R UM 161 3UM161.6 Ferromatics B&R E16DZ4H-L_3 224112411 Ferromatics B&R AT 660D_1 22411605/1 Ferromatics B&R 224102410/2 Ferromatics B&R 22411245/1 Ferromatics B&R 22410281/3 Ferromatics B&R AT 660D_1 22411245/1 Ferromatics B&R 5E2000.03 Ferromatics B&R C830 305 040-4V1 C830305040-8V1 Ferromatik B&R PS465-1 22411110 Ferromatics B&R EX 302 2EX302.5 Ferromatics B&R AI 375 3AI375.6 Ferromatics B&R AT 650 3AT650.6 Ferromatics B&R PS 475 3PS475.9 Ferromatik B&R PS 477 I/O BUS 3PS477.9 Ferromatics B&R CP 152 3CP152.9 Ferromatics B&R BP 154 3BP154.4 Ferromatics B&R BP 150 3BP150 Ferromatics 1 818 300 066 / 0 811 405 110 5491 ...
Spare parts for Ferromatik injection molding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets
Key data: 2000 kN
We sell an SGM Ferromatik Maxima 200 Dual incl. Wittmann linear robot and protective cage. The machine is fully functional and currently still in operation. Year of manufacture: 2005, Clamping force: 200 to, Spray volume: 471 ccm, Connected load: 45 KW, Operating hours: 90,741 h Price according to agreement, dismantling and transport by the buyer!
Key data: 2000 kN
Sell SGM Ferromatik K200S, incl. Wittmann linear robot and protective cage. The machine is fully functional and currently still in operation. Year of manufacture: 1999, Clamping force: 200 to, Injection volume: 441 ccm, Connected load: 37 KW, Operating hours: 121192 h In 2023, the oil and pressure bubbles in the battery storage systems were replaced. If you are interested, you are welcome to visit the machine. Dismantling and removal by the buyer!
Key data: 4500 kN, 80 mm
Sell SGM Ferromatik K450S, incl. Wittmann linear robot and protective cage. Special function monosandwich defective, but the machine works fully functional in normal operation and is currently still in operation. Year of manufacture: 1995, Clamping force: 450 to, Spray volume: 1900 ccm, Connected load: 48 KW, Operating hours: 127524 h The pump motor was renewed in 2017. If you are interested, you are welcome to visit the machine. Dismantling and removal by the buyer!
Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 30 t Year of construction: 2003 Screw diameter: 18 mm Spec. Spray pressure: 2500 bar Clamping unit: 300/... Clamping force: 30 t Lights spar spacing: 300 x 300 mm Aperture travel: 250 mm Max. plate spacing: 330 mm Ejector travel: 140 mm www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2000 Injection unit: .../111 Screw diameter: 25 mm Spec. Spray pressure: 2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 165 mm Fuel tank capacity OIL: 190 l www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 75 t Year of construction: 2003 Screw diameter: 30 mm Spec. Spray pressure: 2500 bar Clamping unit: 750/... Clamping force: 75 t Lights spar spacing: 405 x 380 mm Aperture travel: 320 mm Max. plate spacing: 480 mm Ejector travel: 250 mm www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 200 t Year of construction: 2007 Screw diameter: 40 mm Spec. Injection pressure: 2329 bar Clamping unit: 2000/... Clamping force:: 200 t Lights spar spacing: 750 x 750 mm Aperture travel: 700 mm Max. plate spacing: 1000 mm Ejector travel: 260 mm www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 85 t Year of construction: 2006 Screw diameter: 25/30 mm Spec. Spray pressure: 2253/2289 bar Clamping unit: 850/... Clamping force:: 85 t Lights spar spacing: 420 x 420 mm Aperture travel: 550 mm Max. plate spacing: 750 mm Ejector travel: 300 mm www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2006 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2236/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 32 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 120 mm Fuel tank capacity OIL: 190 l www.europnet.eu
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2003 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2230/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 110 mm Fuel tank capacity OIL: 190 l www.europnet.eu
Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible.
This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, its ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information.
Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - / Contact us at -
Used machine in good condition. Available for immediate delivery. - Injection pressure: 1.817 bar - Injection volume: 2.290 cm? - Clamping force: 4.500 kN - Power: installed max: 90 + 50,6 kW - Weight: 28.000 kg
Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Shot weight max: 123 g - Injection pressure: 1.964 bar - Injection volume: 0 cm? - Screw speed: 400 rpm - Screw L/D ratio: 20 - Nozzle stroke max: 240 mm - Clamping force: 850 kN - Mould height max: 450 mm - Mould height min: 250 mm - Daylight between platens max: 800 mm - Platen size h: 690 mm - Platen size v: 690 mm - Ejector force: 50 kN - Core pullers: 1 x KDE-6-S-B - Oil tank capacity: 290 l - Power: installed max: 29 kW
included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm
