Number of drilling spindles : 21 pcs Pitch : 32 mm Drill Holder : Clamping Surface Drill Shank: 10 mm Operation : Foot pedal Tools : Yes mm Drilling direction : from below & front side Swivel : by hand Swivel angle : only 0° or 90° degrees Max. passage height : 80 mm Max. passage width : 750 mm Number of material clamps : 3 pcs Type of material tension : pneumatic Version : stationary Stop system : only for construction series Weight approx. : 400 kg Motor power : 1.5 kW Extraction diameter : 120 mm
400V, 3Ph, 50Hz complete in standard version with: -Stable machine body in torsion-free welded steel construction, machine body and guideways are ONE solid unit. -Precision-milled steel support table with integrated precision rollers, working length 800 mm (X-axis), working height 905 mm. -2 support tables with castors, 800 x 600 mm (1x machine front, 1x machine back). -Unit with multi-spindle drill head, up to 2 additional units are also possible (Additional units see options) 1 BK1 multi-spindle drilling head (8v/1+1hy) from below with individually retrievable drilling spindles, pitch 32 mm, motor 1.5 kW, tool speed 3200 rpm. All vertical drilling spindles can machine the entire working area (min. 4 mm from the right and left workpiece edges) over the entire X-axis (800 mm), the vertical drilling spindles can be equipped with drills max. 35 mm, drill length 70 mm with drilling d ...
New exhibition machine! List price: 32.665,- € complete in standard version with: Stable, torsion-free frame made of steel, in welded and screwed construction - Slat press beam TOP with 6 elements, lamella press bar SIDE with 5 elements - Lamella press beam with tried-and-tested tolerance compensation (Ganner system) for tightly pressed carcass connections - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the vertical press beam at the bottom - Electromotive adjustment of the two press beams via precision trapezoidal lead screws (with increased pitch and concentricity accuracy) and high-performance running nuts with fat reservoir - The compression is electromotive, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams ...
New exhibition machine! List price: 13.610,- 400V, 3Ph, 50Hz / 1.5 kW complete in standard version with: Fully automatic electronic control with pulse operation via foot valve clamping-drilling-relaxing, electric intermittent operation. Automatic return of the drilling unit after the set drilling depth has been reached. Automatic borehole depth extension for frontal drilling. This eliminates the need to change the borehole depth from flat-side to front-side drilling (+ 10 mm, e.g. for dowel length 35 mm, drilling depth flat side 14 mm and drilling depth front side 24 mm). 1 drill beam with 21 spindles, pitch 32 mm, motor 1.5 kW (drill feed 0-70 mm). incl. 21 quick-change chuck (Ganner system) for easy changing of the drills. Easy swivelling of the drilling unit from 0° to 90°, supported by gas cylinders. 1 clamp carrier can be moved in Y-axis with 3 pneumatic clamping cyl ...
Used dowel, row and fittings drilling machine Int. Art. Ref. m3512 Manufacturer: Gannomat Type Minette 010 Fully automatic pneumatic control with foot valve. Clamping-drilling-relaxing. T-drill head, 7+2 spindles, pitch 32 mm Machine can be swivelled by 90°, with locking. Drill hole depth 57 mm Total length = 0-27 mm Drill hole depth 77 mm Total length = 0-55 mm Shank diameter of the drill bits 10 mm Position adjustment 0-80 mm Clamping height of workpieces max. 80 mm Working height 850 mm Year of construction unknown Power 1.1 kW Spindle speed 3,000 rpm. Compressed air connection 6 bar With pictured accessories Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clar ...
- 2 drill beams with 26 spindles each - Width adjustment by electric motor - 2 motors of 1.5 kW each
This GANNOMAT Elite 25 was manufactured in 2009. Ideal for woodworking, this machine offers robust construction and reliable performance. Consider the opportunity to buy this GANNOMAT Elite 25 woodworking machine. Contact us for more information.
Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,
Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,
