Key data: 125 mm, 250 mm, 3000 U/min
Machine Type: LZ Lathe Manufacturer: GDW Type: LZ250 S1 Year of Make: 2001 Condition: little used / very good Other: original paint Offer will only be sent if a complete imprint is provided! Price 11.500 Euro incl. 19% VAT 9,664 euros net plus 19 VAT Location Warstein , Germany Reference M-GDW-1124 DESCRIPTION We offer you a used lathe from the manufacturer GDW in rare condition. Specifications Tip height 125mm Circumferential diameter 250mm Center width 500mm Stepless spindle speed 60-3000 rpm Multifix Size A Footprint 1300x700x1400mm Weight 600kg Available from the beginning of January 2025 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and ...
Dear Ladies and Gentlemen, we would have to give up this machine at the moment; she is standing in a training workshop. Series production does not take place on it. Please see photos for details
Control Other Digital Display Spindle Passage [mm] 43 Rotary diameter. [mm] 190 General: Control Conventional with digital display Speed 4,000 rpm Center height 165 mm Center width 670 mm Circumferential diameter over bed 300 mm Circumferential diameter over face slide 190 mm Equipment / Accessories: Tailstock with quill Chuck 3-jaw chuck Röhm 160 Multifix Form B tool system Digital display GDW NP 20
Key data: 280 mm
Year of construction 2015 Center height: 165 mm Center width: 650 mm Turning diameter over bed: 280 mm Face slide: 180 mm Spindle speed: 30 - 4000 rpm (infinitely variable) Spindle bore: 43 mm Feeds: 0.025 - 0.9 mm/rev Thread pitch: 0.2 - 7 mm Spindle head DIN 55027: Size 5 Bed sledge travel: 610 mm Sledge travel: 165 mm Upper slide travel: 115 mm Inner cone tailstock quill DIN 228: MK3 Quill stroke: 82 mm Dimensions: 1600 x 860 x 1450 mm Weight: 1000 kg Total power requirement: 18kVA Accessories: 3-jaw chuck, Multifix quick-change steel bracket with cassettes, bezel, coolant device, lighting, chip protection
- Circumferential Ø above bed: 365 mm - Circulation Ø over face slide: 190 mm - Center width: 800 mm - X: 180 mm - Z: 800 mm - Speed range: 3500 rpm - Spindle passage: 43 mm - Tailstock: yes - Quill pick-up cone: MK3 - Quill stroke: 75 mm - Quill Ø: 50 mm - Multifix: B - 4-fold - Coolant device: yes - Lining: Röhm Ø 160 mm 3 jaws - Control: Heidenhain MANUALplus - Total power: 11 kW - Machine weight: 1200 kg - Space requirements (W x D x H): 2.3 x 1.205 x 1.5 m - Condition: good Details Handwheels for X and Z, spindle and axes run smoothly, guides look good Accessories Documentation, 16 Multifix B tool holders, machine feet
Key data: 43 mm, 4500 1/min
CNC lathe by GDW 300CS learning TECHNICAL SPECIFICATIONS: Year: 2005 Number of axes: 2 X-axis stroke: 170 [mm] Z-axis stroke: 650 [mm] X-axis fast forward speed: 6000 [mm/min] Z-axis fast forward speed: 6000 [mm/min] X-axis working speed: 0 - 5000 [mm/min] Z-axis working speed: 0 - 5000 [mm/min] Peak distance: 650 [mm] Peak height: 150 [mm] Diameter allowed above bench: 300 [mm] Permissible diameter above trolley: 160 [mm] Pin nose: DIN 55027 size 5 Spindle passage diameter: 43 [mm] Maximum diameter. Spindle passage in front bearing: 70 [mm] Maximum speed. Pin: 4500 [rpm] Pin power: 5.5 [kW] Pin torque: 58 [Nm] Cone: Morse 3 Stroke sheath against doll: 110 [mm] Diameter against doll sheath: 50 [mm] Touch screen: Yes Maximum weight. eligible interpikes: 100 [kg] Watering tray capacity: 20 [l] Watering pump flow: 30 [l/min] Rated current: 35 [A] Supply volta ...
L+Z Lathe GDW LZ 250 Cdymapnl Center height 125mm Center width 500mm Spindle bore 38mm Connected load 4KW Röhm - Three-jaw lining Digital Collets - Quick clamping device Multifix with inserts Chip back wall Documentation Dimensions: LxWxH 1.4x0.7x1.5 meters Weight 650Kg
- Turning diameter: 250 mm - Center height: 125 mm - Turning length: 800 mm - Speed range: 3,000 rpm - Total power: 9 kW - Machine weight: 650 kg - Space requirements (W x D x H): 1.4 x 0.8 x 1.85 m - Documentation: yes - Condition: very good Details Lever pliers quick clamp chuck mounted on main spindle via intermediate flange. For compression collets type 173E. Otherwise in standard design according to the present original underlay, GDW lever with push button for spindle start, GDW material stop mounted on the grooving carriage behind the center of rotation, monitoring by Beru switch by means of actuating plungers. Ram diameter 5.0 mm, standby light 3-colour with functions: locked-standby-operation, GDW set-up key holder for safe bridging of the stop function, very well maintained machine from a workshop for the disabled, little running Accessories SCM collets: 2 pcs ...
Accessories available. Peak height 125 mm Tip width 500 mm Circulation diameter over bed 250 mm Circulation diameter via flat slide 140 mm Spindle head size 4 Inner cone similarly shortened MK 5 Spindle bore 38 mm Speed 3000 rpm. Bed slide path 450 mm Plan slide path 120 mm Upper slide path 82 mm Inner cone Reitstockpinole DIN 228 MK 3 Pinole stroke 80 mm Feed diameter 125 mm Collet passage max. 28 mm Flat slide diameter max. 200 mm Guide diameter fixed set stick 10 - 60 mm guide diameter. Seedstick 10 - 50 mm Workpiece weight incl. clamping equipment max 40 kg Space requirement L x W x H approx. 1300 x 700 x 1400 mm Weight approx. 650 kg
A GDW cycle-controlled lathe is available. Turning diameter: 300mm, travel X/Z: 170mm/650mm, spindle bore: 43mm, speed: 4500rpm, spindle power: 8.3kW, quill holder: MK3, quill stroke: 110mm, quill diameter: 50mm, center height: 150mm, center distance: 650mm. Machine dimensions X/Y/Z: approx. 2300mm/1100mm/1500mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.
Center height: 125mm, center width: 400mm, orbital diameter over bed/face slide: 260mm/128mm, spindle bore: 38mm, speed: 3000rpm, chuck diameter: 125mm, turret slide travel: 100mm, grooving slide travel: 90mm. Documentation available. On-site inspection is possible.
