Key data: 4 , 180 mm, 120 mm
Guilliet Four-Sided Planer Machine France Finished size 180 x 120 min. 25 x 6 mm 4 motors 5.5 KW 380 V Feed roller in front of the dressing machine Electric height adjustment with step control Wide adjustment Manuel
Key data: 4 , 220 mm, 130 mm
Four-sided planer Guilliet Type KXY 220 Machine No. 343 Year of construction 1992 Planing width 220 mm Planing height 130 mm 4 planing shafts Entrance table length 2500 mm Spindle diameter 40 mm Fully equipped with planer heads Feed motor 1.5 kW Feed speed 4.5 – 27 m/min. 1.Shaft bottom 3.7kw 2nd shaft right 3.7 kW 3rd shaft left 3.7 kW 4.Shaft top 5.5 kW Engines slowed down Left shaft with electric width adjustment With suction distribution Functionally tested and ready for use Dimensions 3900 mm x 1450 mm x H 1500 mm Weight approx. 1600 kg
Cast iron frame Usable width: 630 mm Usable height: 230 mm 4-blade shaft, diameter 120 mm 5.5 kW motor Manual up/down and fine adjustment Table 800 mm long (1500mm with extension) Sectioned feed at the inlet (toothed roller) 2 smooth rollers at the outlet Robust machine, ideal for carpentry
Usable width: 51 0 mm Table length: 2700 mm Shaft 4 blades Ø 120 mm Aluminum fence tilts from 90° to 45°, length 1300 mm 4 kW motor Suction inlet Ø 180 mm Heavy machine Power supply and connection: Voltage: 380 V Connection: Three phase Power: 3 Kw Engine: 4 HP
Shaft length: 250 mm Max tool diameter: 200 mm Manual shaft up/down 50 mm bore shaft Table length: 1100 mm Table width: 720 mm Engine: 5.5 kW (7.5 hp) 4 rotation speeds: 3000, 5000, 6000 and 8000 rpm Full-width sliding tenoning carriage Trolley dimensions: 750 x 300 mm Extendable stop ruler 2 suction inlets diameter 120 mm on the protector Ideal carpentry machine for small series
Cast iron table 900 x 700 mm Shaft length: 220 mm Shaft diameter: 50 mm Manual shaft rise and drop Maximum tool diameter: 150 mm Wooden fence length 400 mm (ELBE Aluminium fence optional) 3 pebble trainer Suction inlet diameter 120 mm
Cast iron frame Usable width 630 mm Usable height 300 mm 9 kW (12hp) engine Electric up/down and fine adjustment Digital display Table length 1200 mm 4 columns with game catch-up Sectioned drive at the entrance 1 steel notched roller 2 rubber rollers at the outlet Variator feed 6 to 20 m/min Power supply and connection: Voltage: 380 V Connection: Three phase Power: 8 kW Engine: 10 HP
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 1,5 kW Feed speed: 4,5 - 27 m/min. total power requirement: 15,5 kw Dimensions (L/W/H): 3.700 x 1.500 x 1.300 mm weight of the machine ca.: 1.600 kg turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compact four-sided planing machine Guilliet KXR for four-sided planing of wood., spindle: 4, working width: 180 mm, working height: 120 mm, spindle 1: Bottom / 3.7kW / 30mm, spindle 2: Right / 3.7kW / 30mm, spindle 3: Left / 3.7kW / 30mm, spindle 4: Top / 5.5kW / 30mm, Dressing table length: 2.100 mm, feed: 6 and 12 m/min., Set of planing heads: Yes
