38 HESS used machine for sale

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

2 Lifting tables for timber frames Useful dimensions / table: 6000 mm x 3400 mm 6 pegboards for positioning stops Removable intermediate ruler with movable stops Hydraulic cylinders for lifting at 80° of the complete deck Vertical clamping by guided beam on square pitch screws Vapour barrier dispenser Control panel Power supply and connection: Voltage: 400 V Connection: Three phase Power: 7 kW Traffic congestion: Length: 6200 mm Width: 3600 mm Height: 700 mm Weight: 2500 Kg

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

Edge Press Hess Type mobil 3000 Machine No. M 2 2791 1538 Year of manufacture 1991 Working length 3000 mm Pneumatic Banding width 60 mm Pressure range 0 – 8 bar 6 press cylinders, pressure plate 120 mm diameter Mobile on castors Heavy version Heating element 0 – 200 °C Solid edge preheating device Length 3200 mm x width 850 mm Weight approx. 450 kg

CONCRETE BLOCK FLOOR PAVER HESS Type: BF 130 S Year of manufacture 1997 Little in use. After inspection by the manufacturer, repair offer 2,000,-- € All available moulds, for concrete blocks, columns and palisades, as well as fibration plates, are included in the price. Net/export price from Location Lower Saxony

Hess Edge press Press length: 2500mm Heating rail Print build-up edge vertical 4 pressing elements horizontal Print build-up edge vertical Machine length: 2700mm Machine height: 1400mm Machine width: 1000mm Pressure build-up: pneumatic G&-5102-o0691

Frame Press Hess Hydraulic Frame Press Type ECONOMIC Built in 1986 Electro-hydraulic Workspace Width 3050 mm x Height 2050 mm With hydraulic pump 0.75 kW 3 beams with pressure cylinders from above Fence side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke approx. 150 mm Compressive force per cylinder 2100 kp (1kp = 1kg) Pressure plate depth 100 mm External Dimensions Space Requirements 3950 mm x 900 mm x H 2550 mm Loading dimensions approx. 3950 mm x 800 mm x H 2250 mm +Pallet with press bar (3 pieces) 2500 mm x 800 mm x H 1000 mm

Automatic longitudinal and transverse conveyor for transporting Hess workpieces Roll width 200mm Width of the feeder with rolls to rolls 170cm Feeder length 255cm Number of cross conveyor belts 6 Variator-controlled feeder drives Can be used for four-sided planers and grinders

Gebr. Frame press HESS Variant YOC 1983 pneumatic 0-15 bar Working area: approx. 2.40 m x 3.40 m 3 pressing units upright 2 pressing units on the side + 1 additional The machine is currently disassembled (see pictures 2 - 6). Picture 1 shows the machine before dismantling. Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Frame Press Hess 3000 - 1750 mm pneumatic The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Used ground paver Manufacturer: Hess Type: BF 150 A Year of construction: 1985 Power: 19 KW Block making machine Manufacturer: Hess Type: BF 150 A Year of production: 1985 Power: 19 KW

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

Technical data on request

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Manufacturer: Hess , Type: Rahmenpresse, Year: ca.1995, Work piece width min-max mm: ca.1500, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-90, Working widht max mm: 2500, Hydraulical/pneumatical: elektrisch, Year :ca.1995

Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Working width: 3550 mm Working height: 2225 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic cylinders horizontal, hydraulic cylinders vertical ---------- Technical Data ---------- Press width: 3,500 mm, Press height: 2,250 mm, Cylinder stroke: 200 mm, Cylinder stroke horrizontal: 80 mm, Total length: 4500 mm, Motor: 1.5 kW, Space requirement (LxDxH): 4,500x850x3,000 mm Sold as is, without technical inspection

Press length: 2500mm; Pressing depth: Pressing elements vertical: 4; Horizontal pressing elements: Pressure build-up: pneumatic; Pressing pressure: per cylinder; Cylinder stroke: mm; Hold-down: no; Machine length: 2700mm; Machine width: 1000mm; Machine height: 1400mm; Weight:

Special offer: Including dismantling and loading until February 29, 2024! Glue star or rotatable glue press Hess Rotor for gluing wood into panels with 8 pressing surfaces (1,250 each mm). Incl. glue applicator and lot of inlays with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4

Pressing area: 3300 mm x 2200 mm; Pressing elements vertical: 3; Horizontal pressing elements: 2; Pressure build-up: electro-hydraulic; Pressing pressure : per cylinder; Hold-down: no; Machine length: 4000 mm; Machine width: 1000 mm; Machine height : 2650 mm; Weight: approx. 900 kg;

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995