Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
date: 20.10.2026
approved
dealer
item-No.: 162754089
New in: 2017 used
approved
Location: de

Technical data Cutting length 3200 mm Cutting width (program pusher travel) 3100 mm Saw blade protrusion 80 mm Collets 6 pieces of which the first 3 pieces are two-fingered, all others are single-fingered, pitch 75/275/475/1200/2000/2700 mm measured from the angle ruler to the middle 1 additional single-fingered collet position 650 mm Air cushion table 1800 x 650 mm 3 pieces, each with a roller element Program slider speed: forward 25 m/min, reverse 80 m/min Automatic cutting height yes Adjustable collet contact pressure yes Adjustable pressure beam contact pressure yes Angle pressure device min. pressure width 0 mm max. pressure width complete cutting length Main saw motor 9.2 kW Dimensions main saw blade 310 x 4.4 x 60 mm Scoring saw motor 1.1 kW Dimensions of scoring saw blade 200 x 4.45 - 5.25 x 45 mm Operating voltage 400 V (+10%/-5%) / 50 Hz Electr. Connected loa ...

saws / Panel saws
date: 16.10.2026
approved
dealer
item-No.: 162753940
New in: 2007 used
approved
Location: sk
Price: 30.000 €
Key data: 3800 mm, 90 mm

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available same.

saws / Panel saws
date: 06.11.2026
approved
dealer
item-No.: 162750027
used
approved
Location: de
Price: 16.000 €
Key data: 5600 mm, 40 mm

Holzma panel saw with lift table loading Type: HPL 11/X/56/27/L Year of Make: 2001 Plate format max. 5600 x 2700 mm, min. 1525 x 1220 mm Plate thickness max. 40 mm, min. 3.2 mm Package height max. 110 mm Precast size min. 100 x 100 mm Narrow strips up to 30 mm wide can be cut. With lift table loading Stacking height in the inlet and outlet max. 480 mm Stacking offset max. 20 mm Main saw motor 18 kW Scoring saw motor 2.2 kW Collet opening 130 mm Saw blade diameter 450 mm Saw blade protrusion 125 mm Cutting length 5600 mm Cutting width (program slide travel) 5600 mm Lift table 5600 x 2700 mm, payload 10 to. with driven roller conveyor and frequency converter Stacking height lift table when installed at floor level max. 580 mm, when installed in a pit max. 780 mm 9 collets, the first 3 of which are double-fingered, all others Single pitch 75/275/475/950/1750/2550/ ...

saws / Panel saws
date: 12.11.2026
approved
dealer
item-No.: 162747026
New in: 2003 used
approved
Location: cz

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

date: 31.03.2026
approved
dealer
item-No.: 162745044
used
approved
Location: sk

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

date: 12.09.2026
item-No.: 162743973
New in: 2002 used
Location: de
Price: 16.000 €

HOLZMA panel sizing saw HPP 82 with plates heavy-duty loading ex site for sale.

date: 20.10.2025
approved
dealer
item-No.: 162740083
New in: 2012 used
approved
Location: pl

HOLZMA HCV 11 Angle Center Double Angle Panel Saw Cutting length 4.300 mm Bevel cutting length 2,200 mm Lift width 2,200 mm Number of Grub Teeth 13 Feed rate max 125 m/min Stepless feed Saw Table Top Allowance 125 mm Saw top diameter max 450 mm Main motor 18 kW Undercutter Yes Postforming scoring machine Loading with vakkum jack Feed table rear Yes Turntable in machine table For delicate items Yes Left Stop Page HOLZMA Central pressure device for angle setting Waste flap HOLZMA Electromagnetic Measurement System HOLZMA Power-Lock HOLZMA Soft-/ Postforming VVSH HOLZMA Integrated Face Cutting HOLZMA Two-finger clamp HOLZMA CADMATIC control Other offers - click - Gabiani Biesse Giben Panhans Schelling Meyer Holz-Her Scm Holzma Rema Scheer panel saw loading panel cutting table saw sheet package sheet machining center plate machining center nesting automatic efficie ...

saws / Panel saws
date: 11.03.2025
item-No.: 162718951
New in: 1989 used
Location: de
Price: 8.000 €
Key data: 4100 mm, 80 mm

Holzma Panel Saw Cutting Length 4100mm Cutting Depth 4500mm with Vorritz Agregat Machine works perfectly

date: 10.06.2025
item-No.: 162729084
New in: 2004 used
Location: de

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

date: 13.04.2025
item-No.: 162732589
New in: 1991 used
Location: de

Cutting length 4100 mm, further data on request

saws
date: 22.06.2025
item-No.: 162708921
New in: 2007 used
Location: de

This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us.

miscellaneous
date: 22.06.2025
item-No.: 162708684
New in: 2011 used
Location: de

This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information.

saws
date: 23.06.2025
item-No.: 162716684
New in: 2001 used
Location: de

Manufacturer: Holzma , Type: HPP 82/43, Year: 2001, Program: CADmatic, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Working hight mm: 95, Vorschub Sägewagen : 5 - 125, Min-max feed programming slider m/min: 125, Network-capable: yes, Saw Blade Diameter mm: 380, Main engine kW: 13,5, Feeding speed max m/min: 5 - 125, Scoring Aggregate : 2,2 kW, Label printer: yes, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Feeding speed max m/min: 5 - 125, Year :2001

saws
date: 23.06.2025
item-No.: 162716725
New in: 1994 used
Location: de

Manufacturer: Holzma, Type: HPP 81/42, Year: 1994, Program: Holzma, Cutting lenght mm: 4200, Working hight mm: 85, Vorschub Sägewagen : ca.100, Min-max feed programming slider m/min: ca.80, Angle pressure fixture: yes, Saw Blade Diameter mm: 450, Number of clamping tools: 6, Main engine kW: ca.12,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :1994

saws
date: 23.06.2025
item-No.: 162716788
New in: 1997 used
Location: de

Manufacturer: Holzma, Year: 1997, Optimisation: no, Max plate format mm: 3800 X 3100, Min-max plate thickness mm: 6-60, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Saw blade protrusion: 75, Vorschub Sägewagen : 80, Min-max feed programming slider m/min: 60, Saw Blade Diameter mm: 380, Number of clamping tools: 6, Main engine kW: 7,5, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Year :1997

saws
date: 23.06.2025
item-No.: 162717125
New in: 2010 used
Location: de

Manufacturer: Holzma , Type: HPL 380 43/22, Year: 2010, Optimisation: yes, Max plate format mm: 4300 X 2200, Min-max plate thickness mm: 6-40, Cutting lenght mm: 4300, Working hight mm: 95, Vorschub Sägewagen : 150, Pressure beam control: yes, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 380, Number of clamping tools: 7, Feeding from back side: yes, FREE TEXT: Spannsystem Sägeblatt Powerlook/Voritzer gesteuert für Postforming Platten, Year :2010

spare parts for wood working machines
date: 23.06.2025
item-No.: 162717399
used
Location: de

Manufacturer: Holzma, Type: Digimatic,

spare parts for wood working machines
date: 25.10.2023
item-No.: 162600417
used
Location: de

Manufacturer: Holzma, Type: Digimatic,

saws
date: 25.10.2023
item-No.: 162599758
New in: 1994 used
Location: de

Manufacturer: Holzma, Type: HPP 81/42, Year: 1994, Program: Holzma, Cutting lenght mm: 4200, Working hight mm: 85, Vorschub Sägewagen : ca.100, Min-max feed programming slider m/min: ca.80, Angle pressure fixture: yes, Saw Blade Diameter mm: 450, Number of clamping tools: 6, Main engine kW: ca.12,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :1994

saws
date: 25.10.2023
item-No.: 162599839
New in: 2001 used
Location: de

Manufacturer: Holzma , Type: HPP 82/43, Year: 2001, Program: CADmatic, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Working hight mm: 95, Vorschub Sägewagen : 5 - 125, Min-max feed programming slider m/min: 125, Network-capable: yes, Saw Blade Diameter mm: 380, Main engine kW: 13,5, Feeding speed max m/min: 5 - 125, Scoring Aggregate : 2,2 kW, Label printer: yes, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Feeding speed max m/min: 5 - 125, Year :2001

saws
date: 25.10.2023
item-No.: 162599087
New in: 2010 used
Location: de

Manufacturer: Holzma , Type: HPL 380 43/22, Year: 2010, Optimisation: yes, Max plate format mm: 4300 X 2200, Min-max plate thickness mm: 6-40, Cutting lenght mm: 4300, Working hight mm: 95, Vorschub Sägewagen : 150, Pressure beam control: yes, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 380, Number of clamping tools: 7, Feeding from back side: yes, FREE TEXT: Spannsystem Sägeblatt Powerlook/Voritzer gesteuert für Postforming Platten, Year :2010

saws
date: 25.10.2023
item-No.: 162599655
New in: 1997 used
Location: de

Manufacturer: Holzma, Year: 1997, Optimisation: no, Max plate format mm: 3800 X 3100, Min-max plate thickness mm: 6-60, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Saw blade protrusion: 75, Vorschub Sägewagen : 80, Min-max feed programming slider m/min: 60, Saw Blade Diameter mm: 380, Number of clamping tools: 6, Main engine kW: 7,5, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Year :1997

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)