Model
(Manufacturer: HSM)
Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm
Specifications Maximum pressure: 5 tons Power connection: 400V / 1.5 kW Pressing force: 1.42 kg/cm² Year of Make: 1990 Bale size: 700x500x450 mm Productivity: approx. 3 bales/hour Bale weight: approx. 50 kg Price: on request Machine is fully functional. If you have any questions, please call us: +48 696 072 985
Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985
automatic baler Manufacturer: HSM Type: VK 8818 R-FU, 100 t Year of manufacture / delivery date: 12/2012 Operating hours: approx. 13,500 specifications: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg including: - Remote maintenance system - Wire Slot Maze - Press box double-walled with replaceable HARDOX 500 sh ...
Good day We hereby offer you a used, vertical baler, from the manufacturer HSM, type VL 600, with 60t pressing force, year of construction 03/2004. The machine was used in a small logistics center to press paper, cardboard and foil and was only in operation for a few hours a week. The machine was partially overhauled and tested. The machine documentation is available in German. A tour of the press is possible by appointment. We would be happy if this machine is interesting for you. Ciqjkxntb8 Your service team Mertens & Frowein GmbH
Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
HSM baler, type HL 7009 Re, with lift-tilt device, year of manufacture 2016 Specifications: Manufacturer: HSM Type: HL 7009 Re Year of Make: 2016 Engine hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Remark: The machine is in very good condition. A new, original HSM master cylinder was installed. The press was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your mate ...
Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985
Vertical baler HSM 500.2 VL Press pressure 54 to Motor 7.5 kW Year of manufacture 2004 Bale format 1200 x 800 mm Filling opening with sliding door Binding 4-fold vertical, wire strapping Machine weight approx. 2,300 kg Machine is in stock and has been overhauled by us The hydraulic cylinder was overhauled by a specialist company, the piston rod was renewed, then installed and resealed, so the machine has an absolutely new condition You can see pictures of the original machine. Delivery time immediately from stock
HSM channel baler pressure 32 t bale size 100 x 80 x 120 cm bale weight up to 600 kg, depending on the material dimension of hopper opening 200 x 75 cm weight of the baler appr. 4500kg length of the baler approx 6 metres motor 11 kW 6x horizontal tying doors open hydraulically top pressure flaps
HSM Powerline FA 500.3 shredder, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of Make: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in sheet 80g/m²: 180-200 Tank volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg The machine is in good condition. Some teeth have broken off on one cutting shaft. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee.
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9920 Year of Make: 2016 Hours: 1924 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to an ...
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9919 Year of Make: 2016 Hours: 1715 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in good condition with slight scratches and dents. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. ...
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9918 Year of Make: 2016 Hours: 1930 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to an ...
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9917 Year of Make: 2016 Hours: 1509 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in good condition with slight scratches and dents. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. ...
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9916 Year of Make: 2016 Hours: 1940 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, cardboard, foils, plastic, PET The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to an ...
Vertical baler HSM V-Press 820 plus, built in 2023, as good as new Specifications: Manufacturer: HSM Type: V-Press 820 plus Year of manufacture: 2023 Press force: 178 kN Drive power: 4 kW Filling opening: 1195 x 558 mm Filling height: 928 mm Bale size: approx. 1200 x 780 x 1000 mm Bale weight: 250 kg Binding: manual Theor. Idle cycle time: 23 s Dimensions: 1700 x 1075 x 2499 mm (WxDxH) Weight: 1300 kg Materials: foil, paper, cardboard boxes Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
HSM Powerline FA 500.3 document shredder including outfeed conveyor belt, for large quantities Specifications Manufacturer: HSM Type: FA 500.3 Year of Make: 2014 Drive power: 7.5 kW Input width: 500 mm Cutting width: 6x40-53 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / O-2 / P-3 / T-3 Cutting capacity in sheet 80g/m²: 300-350 Tank volume: 530 l Noise level (idle): approx. 65 dB(A) Dimensions: 1800 x 1200 x 1800 mm (LxWxH) Weight: 905 kg Outfeed conveyor belt Dimensions: 712 x 1514 x 1692 mm Material: Paper, staples and paper clips, credit card, CD/DVD, file folder, USB stick, floppy disk Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. ...
Baler HSM, type HL 7009 MGB, built in 2022, as good as new Specifications: Manufacturer: HSM Type: HL 7009 MGB Year of Make: 2022 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time incl. lift-tilt device: 47 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1200 x 1100 x 1100 mm (LxWxH) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 4847 x 1994 x 2040 mm (LxWxH) Weight: 7400 kg The baler has a horn-tilt device for large waste containers (MGB). Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place from
Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9902 Year of Make: 2016 Hours: 2548 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9905 Year of Make: 2016 Hours: 1849 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
function-tested press ! without instruction manual !
Specifications Maximum pressure: 17.8 tons Press force: 1.9 kg/cm² Bale size: 1200x780x1000 mm Bale weight: approx. 250 kg Power connection: 400V / 4 kW Year of Make: 2008 Productivity: approx. 2-5 bales/hour Machine is fully functional, after technical inspection and after renovation
Horizontal hydraulic baling press with manual tying, brand: HSM, model: HL4010 Re, engine: 9 KW (12 hp), year: 2013, bale dimensions: 750x750 mm, bale weight: 280-300 Kg. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Specifications Maximum pressure: 30 tons Press force: 3.13 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 300-350 kg Power supply: 400V / 5.5 kW Year of construction: 1999 Productivity: approx. 3 bales/hr If you have any questions, please call us: +48 696 072 985
Baler HSM VK 4212, built in 2013, including spare parts package Manufacturer: HSM Type: VK 4212 Year of construction: 2013 Hours: 17,321 Press force: 42 t Drive power: 22 kW Idle cycle time: 12.7 s Filling opening: 620 x 1140 mm (WxL) Capacity: 50 kg/m³: 9.05 t/h Bale size: 700 x 800 x 600-1200 mm Binding: 4-fold, automatic Transport dimensions: approx. 7,200 x 2,000 x 2,100 mm (LxWxH) Weight: approx. 6,300 kg Materials: paper, cardboard, die-cuts, foil
Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
