Key data: 3000 kN, 2746 g/PS, 120 mm
GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5
Key data: 3000 kN, 3268 g/PS, 120 mm
GL300 PET P100/120 E120 in production running 72cav molds exworks south america 1998 auxiliaries Pet resin dryer Plastic Systems DR218HT Throughput 550 kg/h silo capacity 4Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems Plastic Systems P+D8:J55SNC 9
Key data: 3000 kN, 3268 g/PS, 100 mm
GL300 PET P100/120 E100 in production running 72cav molds exworks south america 1997 auxiliaries Pet resin dryer Moretto DP311 model DP 311HT-CC'S Throughput 550 kg/h silo capacity 3.5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems NSC-NP
Key data: 5000 kN, 3845 g/PS, 120 mm
Husky SX500 running 96 cavities molds not in production since Feb 2024 120mm screw 3845cm3 shotweight manufactured June 1995 between bars 920x920mm
Key data: 3000 kN, 3268 g/PS, 100 mm
LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4
PET PREFORM Injection Molding Machine Manufacturer: HUSKY Type: XL 300 P Year of construction: 1994 Hours read (h): 19,672 Serial Number: 10816-L-94010 Condition: refurbished 2017 (see PDF) Screw Ø: 100 mm Clamping force: 300 t Panel size: 1,060 mm x 1,030 mm Tie bar spacing (H x V): 720 mm x 720 mm max. daylight: 1,040 mm Injection Position: Horizontal Dimensions injection unit (WxDxH) approx. 500 x 180 x 210 cm Dimensions clamping unit (WxDxH) approx. 440 x 195 x 260 cm Dimensions control cabinet (WxDxH) approx. 305 x 70 x 255 cm Weight of the injection unit 16 t Weight clamping unit 20 t Equipment: - Robot removal system HUSKY S/E Robot B Granulate dryer and conveyor belt: Dry Air Dryer Manufacturer: PIOVAN Type: DS528, Year of manufacture: 2003 (refurbished 2017) Serial Number: ODS 864 Air flow: 1,600 m³/h Funnel T4000IX Serial No.: LZ 215 C ...
PET Preform Injection Molding Machine Production Line with Complete Peripherals Manufacturer: HUSKY Type: GL 300 PET P85/95 E100 Year of construction: 2000 Condition: Very good - refurbished by the manufacturer Husky in 2020 / Encore 2.0 / ProAct Program Equipment / Peripheral: Picking robots: -Husky FSI200GL300 - Refurbished in 2018 Packing unit: Soft Drop System with Turning Plate for Mesh Boxes Granule drying conveyance consists of: - Piovan Easy 3 - Piovan DP 621 Dry Air Dryer with Molecular Sieve Towers - Year of construction: 2006 - Piovan TN 800 Hopper 800 dm3 - Year of manufacture: 2006 - Piovan F48/2 suction delivery unit / vacuum pump - Year of manufacture: 2010 Tool Dryer / Mould Dryer: - Piovan RPA1800 Year of manufacture: 2016 Tool Temperature Control Device: - Moldmasters M2M Year of manufacture: 2015
HUSKY electric HPETL 230 (230 ton) year `2015 for PET preform
WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production
HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ
HUSKY HPETL 230 (230 ton) injection molding machines for PET preform. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)
(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ
Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS
JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE
H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller
UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,
ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz
H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense
USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95
For 30.3 g and 17.8 g preforms Working cycles 11,583,052 Max. Throughput 390 kg/h PET, max. shot weight 2424 g PET Fully electric clamping unit Movable mould mounting platen is guided on rollers Post-mixing device in the nozzle Control of additional devices integrated in the machine control system Display of flow and return temperature/pressure of the mould cooling water Control output for colour dosing unit Automatic lubrication system Incl. complete moulds of 30.3gr (cold and hot side) and 17.8gr (cold and hot side) Thread: PCO1881
Husky Injection Molding for PET Preform Machine from 2005 HUSKY HyPET 120 P85/95 E85 It includes the following auxiliaries: Mold dehumidifier - Plastic Systems DR 112HT Hopper & loader - Plastic Systems NSC NP Dryer: Plastic Systems DL 1200 It also includes: - One Hot Runner 32 Cavities - 32 cavities: PCO 1810 19,5gr (Complete Cold Half) - 32 cavities: PCO 1810 40,0gr (Complete Cold Half) - 32 cavities: PCO 1810 50,0gr (use the 40gr Cold Half)
