Model
  • page

     1
  • Next
  • 2
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
welding machines / Flash Butt Welding Machines
date: 12.10.2026
approved
dealer
item-No.: 162753713
New in: 2015 used
approved
Location: rs

Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...

welding machines / Flash Butt Welding Machines
date: 22.09.2026
approved
dealer
IDEAL BAS 052 Flash Butt Welding Machines
item-No.: 162752431
New in: 2012 used
approved
Location: rs

IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...

welding machines / Flash Butt Welding Machines
date: 11.09.2026
approved
dealer
item-No.: 162751932
New in: 2008 used
approved
Location: rs

iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, ...

welding machines / Flash Butt Welding Machines
date: 11.09.2026
approved
dealer
item-No.: 162751931
New in: 1997 used
approved
Location: rs

Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 100013501700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

post press: cutters and guillotines / Paper cutters
date: 24.08.2026
approved
dealer
item-No.: 162751006
used
approved
Location: de

IDEAL 1080 Lever Shears with Material Knife Cutting length 800 mm Year of construction 2016 Serial Number 1166252 Additional set of material knives with cutting rail

post press: cutters and guillotines / Paper cutting machines
date: 09.07.2026
approved
dealer
item-No.: 162749118
New in: 2019 used
approved
Location: de

IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.

post press: cutters and guillotines / Paper cutters
date: 12.10.2026
approved
dealer
item-No.: 162745447
New in: 2018 used
approved
Location: fr

Very good conditions

post press: cutters and guillotines / Paper cutting machines
date: 10.11.2026
approved
dealer
item-No.: 162744961
used
approved
Location: de

This machine is designed for cutting stacks of paper to a specific size. Cutting length: 475 mm Insertion depth: 458 mm Width x Depth x Height: 762 x 1053x1296 mm Good condition

shredders / Cutting mills
date: 07.07.2026
approved
dealer
item-No.: 162742111
new
approved
Location: de
Price: 900 €

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

post press: cutters and guillotines / Paper cutting machines
date: 04.05.2026
approved
dealer
item-No.: 162741982
used
approved
Location: de

Cutting machine IDEAL 5560 Art.Nr. L1121

post press: cutters and guillotines / Paper cutting machines
date: 02.06.2025
item-No.: 162705939
New in: 2007 used
Location: de

Cutting machine IDEAL 4850-95 EP, machine number 3185364, year of construction 2007, program control, safety protective cover, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment. Rebrjq Nl T Ns Sb Nwkju

post press: cutters and guillotines / Paper cutting machines
date: 30.05.2025
item-No.: 162722668
New in: 2020 used
Location: ch

S. No.: 1504369 Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

post press: other
date: 30.05.2025
item-No.: 162732151
used
Location: ch

1X RESERVE KNIFE FOR IDEAL 7225-55 EC3 LT Format (cm): 72

post press: cutters and guillotines / Paper cutting machines
date: 30.05.2025
item-No.: 162732236
New in: 2006 used
Location: ch

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

welding machines / Flash Butt Welding Machines
date: 22.07.2024
item-No.: 162696893
used
Location: rs

Type: SMH 060 Band saw blade grinding machine. Strip width up to: 60 [mm]. Power: 400 [V] / 50 [Hz]. For removing the weld bur from butt welded joints. In used condition, cleaned, repainted and tested.  3 pcs on stock.

post press: cutters and guillotines / Paper cutting machines
date: 22.08.2024
item-No.: 162698950
New in: 2007 used
Location: de

Paper Cutting Machine IDEAL (KRUG + PRIESTER) 4850-95EP Product No.PS5817 Year of manufacture 2007 Very good condition

paper converting: other
date: 21.04.2024
item-No.: 162682769
used
Location: de

Professional file shredder from Ideal

shredders / Shredders
date: 06.10.2023
item-No.: 162555565
New in: 2007 used
Location: pl

Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.

shredders / Shredders
date: 06.10.2023
item-No.: 162555559
New in: 2015 used
Location: pl

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

post press: cutters and guillotines / Paper cutters
date: 19.10.2023
item-No.: 162297062
used
Location: de

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

welding machines / Arc welding machines
date: 12.10.2026
approved
dealer
item-No.: 162735659
New in: 2015 used
approved
Location: de

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

shredders / Shredders
date: 08.08.2023
item-No.: 158378370
New in: 1988 used
Location: pl

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

shredders / Shredders
date: 08.08.2023
item-No.: 158378369
New in: 1993 used
Location: pl

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

saws
date: 17.10.2023
item-No.: 146140978
used
Location: de

Tape welding machine for sawmills up to 35mm Manufacturer Ideal Type B1 220 Volt 6 Ampere Special price

welding machines
date: 23.06.2025
item-No.: 162710655
New in: 1988 used
Location: de

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

post press: cutters and guillotines
date: 23.06.2025
item-No.: 162712287
New in: 1999 used

cutting width: 65 cm feeding depth: 61 cm feeding high max.: 8 cm IDEAL Cutting machine 6550-95 EC - EC-control (automatic positioning using the 10-key pad) - Eject-function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

post press: cutters and guillotines
date: 06.03.2025
item-No.: 162730348
New in: 2001 used

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

post press: other
date: 06.03.2025
item-No.: 162730417
used

4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

post press: cutters and guillotines
date: 23.04.2024
item-No.: 162689096
New in: 2001 used
Location: de

Schneidmaschine / Gullotine Ideal 5221-95 EC Baujahr / Year 2001 - Serial-No. 1981934 Schnittbreite / Cutting width max. 520mm Programm Ersatzmesser / Spare Knife Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

post press: other
date: 23.04.2024
item-No.: 162689170
used
Location: de

4-Spindle Paper Drilling Machine Ideal 504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)