gebr. Long belt grinding machine JOHANNSEN T94 Super CE version YOC 1995 Total connected load: 4.2 kW / 9.9 A Motor power: 4.0 kW Table size: 278 x 80 cm electr. Table lift Belt dimensions: 150 x 7,800 mm Maximum usable sanding belt length: 260 cm Offset (right): 1,000 x 310 mm 2 sanding pads: 300 + 450 mm Vacuum suction clamping device (pneum. Workpiece clamping) with 4 suction cups incl. vacuum pump Table insert infinitely swivelling Selector switch for clockwise/counterclockwise rotation Integrated lighting Belt blow-out device Table Lock Engine brake Extraction connection: 180 mm Dimensions: 220 x 405 cm Weight: 700 kg Machine dimensions (approx. dimensions) W:405 cm D: 148 cm H: 153 cm
Long belt sanding machine Johannsen Type T 88 Machine No. 12500 Sanding belt dimensions 7800 mm x 150 mm Table size 2750 mm x 1000 mm Upper sanding belt cover With abrasive belt blow-out nozzle Table stroke 340 mm Sanding belt 2 speeds left and right rotation Grinding motor 3.5 / 5.5 kW Extraction fan 2.2 kW Extraction connection diameter 160 mm Including abrasive belts 1 piece grit 80, 9 pieces grit 100 Including a total of 3 sanding shoes 2 pieces size 300 mm x 140 mm, 1 piece 450 mm x 140 mm Dimensions 4000 mm x 1700 mm x H 1400 mm
Johannsen T 88-K Long belt sander pneumatic grinding shoe Grinding length 2.8m Grinding width 1m Grinding height 500mm Round shaft focuser 9.7KW 21.5 Amp. 400V 50HZ Table size 2.9m x 1.4m Footprint L= 4m W= 2.6m Machines No. 16033 Year of manufacture 1984 GS tested Suction nozzle D= 180mm Long sanding shoe G&-4148-O0945
Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg
Long belt sanding machine Johannsen Type T 88 K-pneuma Machine No. 10771 For sanding, matting and polishing wood and lacquer surfaces, Wooden and plastic window frames Table size 2900 mm x 1400 mm For grinding long parts that extend beyond the machine Workpiece height maximum 500 mm 2 scraper brushes on the table Table height adjustment by means of handwheel Motor power 6/8 kW Sanding belt left and right rotation Including sanding pad 640 x 140 mm Including pneumatic sanding shoe 300 x 140 mm Upper sanding support throughout With cover for upper sanding pad Disc disc diameter 280 mm with support Sanding belt dimensions 7800 mm x 150 mm Belt speed 11/22 m/sec. With belt blow-out nozzle With extraction fan Suction nozzle diameter 180 mm Space requirement 4200 mm x 2600 mm Dimensions 4000 mm x 1700 mm x H 1460 mm Weight approx. 1400 kg
Gebr. Long belt sander with brush unit Sale only complete - no single sale! JACOB Motor power: 5.5 kW Table size: 280 x 90 cm Table height adjustment via handwheel Counterclockwise and clockwise rotation Brush unit: YOC 1982 2.2 kW Extraction arm Extraction connection 180 + 80 mm incl. various abrasive belts and brushes (see pictures) Transport dimensions: L: 400 cm W: 150 cm H: 150 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.
Long belt sander model T 88 K table length 2800 mm pneum. with exhaust fan built in 95
Gebr. Long belt sander JOHANNSEN T88 Engine power: 7.5 hp (5.5 kW) Table size: 295 x 95 cm Table height adjustment via handwheel Sanding belt dimensions: 150 x 7,700 mm Depth of offset (right): 115 cm incl. various sandpaper Suction connection: 180 mm + 120 mm incl. various sandpaper Machine dimensions without grinding table (approx. dimensions): L: 410 cm W: 170 cm H: 150 cm Weight: approx. 850 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.
Gebr. Long belt sander JOHANNSEN T93 YOC 1994 Motor power: 4.0 kW Table size: 278 x 80 cm electr. Table Lift Hinge dimensions: 150 x 7,400 mm Suction connection: 180 mm Offsetting (right): 450 x 220 mm Table support (wood) renewed Dimensions: 220 x 395 cm Weight: 550 kg
Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)
Johannsen T 85 ST long-belt sander for precise sanding of solid wood and veneer surfaces. This machine is ideal for joinery and high-end interior work, and its sturdy construction and sensitive belt control ensure a consistent sanding finish., table length: approx. 2,800 mm, table width: about 950 mm, height adjustment: electrical, engine: 4 kW
Band width: 150mm; Band length: mm; Table size: approx. 2600mm x 1000mm; Suction connection: Motor power: 3kW; Machine length: Machine width: Weight: 900kg;
Band dimensions: 150x7800mm, grinding width: 1000mm, power: 6.6kW, length: 3950mm, width: 2300mm, weight: 900kg.
Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,
Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985
Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991
Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993
Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992
Band width: 150mm; Band length: mm; Table size: 2600mm x 800mm; Extraction connection: Motor power: 3kW; Machine Length: Machine Width: Weight: 700kg;
Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985
Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992
Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,
Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993
Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991
