Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
post press: other
date: 03.11.2026
approved
dealer
item-No.: 162755069
New in: 2016 used
approved
Location: ch

M. No.: VD 09.16.1408 Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection

shrinking machines / Shrinking units
date: 23.10.2026
approved
dealer
item-No.: 162754329
New in: 2003 used
approved
Location: de

Manufacturer: Kallfass GmbH Type: P5 4040/400 NT Year of Make: 2003 Technical data: Welded frame dimensions: 400 x 400 mm Film roll width: max. 500 mm Working height: 870 - 970 mm Power connection: 380 V three-phase current Easy-to-use angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welded frame dimensions 400 x 400 mm. Proven impulse welding technology with Teflonized cutting wire for absolutely odour-free operation. Equipped with a locking mechanism as a automatic pressure system for exact compliance with the set welding time and problem-free cut-off welding even of thick foils. Visits and demonstrations are possible by appointment in our premises.

pillow packs machines / Tubular bag machines horizontal
date: 24.09.2026
approved
dealer
item-No.: 162752527
New in: 2001 used
approved
Location: de

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

pillow packs machines / Flow wrapping machines
date: 23.09.2026
approved
dealer
item-No.: 162752444
New in: 2003 used
approved
Location: de

Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor

shrinking machines / Shrinking tunnels
date: 23.09.2026
approved
dealer
item-No.: 162752443
New in: 2003 used
approved
Location: de

1 piece Kallfass Shrink Tunnel Compact 450 SO Year of construction 2003

shrinking machines / Shrinking tunnels
date: 23.09.2026
approved
dealer
item-No.: 162752442
New in: 2003 used
approved
Location: de

1 piece Kallfass Shrink Tunnel Standard 650 NT Year of construction 2003

pillow packs machines / Flow wrapping machines
date: 23.09.2026
approved
dealer
item-No.: 162752440
New in: 2017 used
approved
Location: de

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

other wood working machines / Transportation belts
date: 11.08.2026
approved
dealer
item-No.: 162750408
used
approved
Location: pl

Kallfass KFP-4000-4 Stacking Package length 2500mm Feeding to planer feeder Conveyor for spacers Net price

pillow packs machines / Complete systems
date: 22.04.2025
item-No.: 162714360
used
Location: de

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

shrinking machines / Shrinking units for sheets
date: 23.06.2025
item-No.: 162731750
New in: 1997 used
Location: de

Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!

shrinking machines / Bundle packers
date: 02.09.2024
item-No.: 162732627
New in: 1999 used
Location: de

Kallfass banding machine with shrink tunnel particularly suitable for long parts (wood, parquet, etc.) Trays or newspapers in a stack. Built in 1999 Punch width 950mm Max. film width 820mm Film (flat shrink film): up to 120 μm Film roll outer diameter: max. 400 mm Film roll width: top 650 mm, bottom 620 mm Passage width: 950 mm Passage height, adjustable: 400 mm In-line conveyor belt: length 2000 mm, Goods conveyor belt in the outfeed: length 2000 mm Welding system: in profile form, permanently heated, temperature thermostatically controlled, Specially coated, maintenance-free, completely odourless: Pneumatically operated welding punch with safety brake cylinders: Film tear and separation control: Foil pre-dispensing at the bottom for extremely light products Foil rolls at the top and bottom for laying with motorised drive Welding punch protection to protect the produ ...

shrinking machines / Shrinking units for sheets
date: 02.09.2024
item-No.: 162732629
New in: 2003 used
Location: de

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

pillow packs machines
date: 07.08.2023
item-No.: 160764846
New in: 2002 used
Location: de

Packaging machine Kallfass Universa 5050; good condition; cleaned and tested; Frame size 500x500mm; Passage height 100mm; with Tunnel Compact 650 S; Passage width 650mm; Passage height max.400mm; Cooling fans L-sealer Kallfass Universa 5050; good condition; cleaned and checked; frame size 500x500mm; product hight max.100mm; with tunnel Compact 650 S; working width 650mm; working hight max.400mm; cooling unit.

shrinking machines / Shrinking units for sheets
date: 15.12.2022
item-No.: 160287734
New in: 2006 used
Location: de

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

shrinking machines / Shrinking units for sheets
date: 15.12.2022
item-No.: 160287733
New in: 2003 used
Location: de

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

post press: other / Further processing machines
date: 16.08.2023
item-No.: 157576778
New in: 1986 used
Location: de

Shrink Wrap/Foil Sealing

shrinking machines / Shrinking tunnels
date: 20.05.2023
item-No.: 149532207
New in: 1990 used
Location: de

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

other wood working machines
date: 22.06.2025
item-No.: 162708647
used
Location: nl

Kallfass tilthoist with transport belt

other wood working machines
date: 22.06.2025
item-No.: 162708648
New in: 2012 new
Location: nl

KALLFASS outfeed and stacking line FS, Manufacture year 2012, - Roller conveyor with cross transport, - Adjustable stop, - Alignment conveyor, - Cross chain conveyor with layer formation, - Stacking system with stick cassettes, - Lifting table with chain conveyor, - Chain conveyor for wood packages, The line is in excellent condition

shrinking machines
date: 06.03.2025
item-No.: 162730330
New in: 2005 used

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

shrinking machines
date: 06.03.2025
item-No.: 162730366
New in: 1989 used

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

shrinking machines
date: 06.03.2025
item-No.: 162730239
New in: 2000 used

Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

filling machines
date: 23.04.2024
item-No.: 162683603
New in: 2000 used

Vollautomatische Einschweissmaschiene mit Einschweisstunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

filling machines
date: 23.04.2024
item-No.: 162689080
New in: 2005 used
Location: de

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

filling machines
date: 23.04.2024
item-No.: 162689115
New in: 1989 used
Location: de

Halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

filling machines
date: 23.04.2024
item-No.: 162689250
New in: 1995 used
Location: de

halb-automatische Winkeleinschweissmaschine - Semi-Automatic Foil sealing machine Kallfass KC50040/450 Year 1995 - Serial-No. TE 3.95.053 Frame Size: 500 x 400 mm Foil: ca. 12-80ym Tunnel h/w: 400/450 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

filling machines
date: 02.11.2023
item-No.: 162682436
New in: 1995 used
Location: de

halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC50040/450 Year 1995 - Serial-No. TE 3.95.053 Frame Size: 500 x 400 mm Foil: ca. 12-80ym Tunnel h/w: 400/450 mm -Online-Video-Inspection by Skype-Video- -We woul

filling machines
date: 02.11.2023
item-No.: 162682295
New in: 1989 used
Location: de

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400 Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

pharmaceuticals and cosmetics machines
date: 01.11.2023
item-No.: 162682606
New in: 2006 used
Location: de

• Output max. 20 cycles/min • Welding frame dimensions 500 x 400 mm • For half-tubular film approx. 12-80 ym • Film roll diam. max. 300 mm, film core diam. 76 mm • Foil roll width max. 550 mm • Tunnel passage width 450 mm, height 100-400 mm • Bar chain conveyor, bar spacing 25 mm, bar diam. 12 mm • Transport speed infinitely variable 2.5-12 m/min • Soft start • Automatic cooling system • Special cooling fan at tunnel outlet • Working height 870-970 mm • Contactor control • Drive 400V/50/60Hz/7,5kW

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)