We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Veneer saw long fence LZ 5/2 - 3500, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Langzauner A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3500mm Cutting and joining height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear storage table with penetrating finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display Format table is very solidly built and runs on parallel circular guides, it is slightly offset to the right so that cross-sections can be made on the veneer packages on the left side Angle stop on the stop table and on the front shelf for head cuts of the veneer packages Special equipment with rack and pinion compensation for the pressur ...
Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s- ...
-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.
car. Edge profile grinding machine Langzauner LZK-SD Machine from a small craft business Joinery dissolution due to retirement ex location net € 6.000,00 as seen
Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
Long belt grinding machine, roller spacing approx. 3000 mm
Belt grinding machine for wood & metal, roller spacing approx. 3000 mm
Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,
Langzauner LZG-M-I SY Special belt grinder for sale. Year of construction: 2009-2010. Very good condition, rarely used. Find more here - / Contact us at -
Langzauner LZT veneer press in very good condition for sale. Heating plates (anodised) have only been replaced and are in great condition. Comes with an automatic opening and safety device. Self collection. Forklift available for loading. Find more here - / Contact us at -
Electromotive width stop, with positioning control and digital display, two-hand operation with light barrier ---------- Technical data ---------- cutting length: 2,600 mm, cutting height: 50 mm, width stop max: 600 mm, dimensions (L x W x H): 3,400 x 1,770 x 1,500 mm, weight: 2900 kg Sale in actual condition, without technical inspection
Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Grinding roller diameter: 2 pieces; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction port: 140mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 400kg;
Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,