Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!
Hacker Lindner T 650/220-2 with Virborinnen with scraper conveyor with metal detector 55kw...
Inv. Num. : 7293 Type: FS30 Producer: LINDNER Generated: Parameters: The grinder is in good condition.
Inv. Num. : 7292 Type: FS30 Producer: LINDNER Created: GO 1999 Parameters: Machine weight: 3900 kg The grinder is in good condition.
Inv. Num. : 7459 Type: GU-A Producer: LINDNER Generated: Parameters: The mill is in good condition.
Wood chipper, sawmill edgings LINDNER type T 400/140-2 – after technical inspection - very good condition – for technological chips TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm main engine power 33 kW motor power from feed 2 x 1.5 kW number of knives 2 pieces sieve with dimensions of 60 mm x 90 mm feed shafts in very good condition feeder feed motor power 1.5 kW feeder length 4200 mm transport dimensions (length/width/height) 430 / 240 / 150 cm weight approx. 2000 kg
2- Shaft shredder for pre-crushing sperm, beams, etc. with overbelt magnet Diesel engine from CAT
used
2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT
ORDER NO. 7177 TECHNICAL DATA - inlet width 400mm - inlet height 160mm - shaft width 400mm - shaft diameter 450mm - knife length 410mm - number of knives 2 pcs - Pulling shaft from above, toothed - Pulling shaft at the bottom, toothed - conveyor belt - length of the infeed belt 3980mm - width of the infeed belt 320mm - motor about 0.75kW - autorewers - main motor 22kW - feed motor 2×1.5kW - machine dimensions length/width/height 2200x1000x1370mm - feeder dimensions length/width/height 4050x640x950mm - weight of the machine and feeder about 2000kg ADVANTAGES – with a conveyor belt – autorewers – used chipper, very good condition Net price: 65 900 PLN Ex Tax: €14,977 depending on price, €4.40 (Prices may vary in case of larger fluctuations)
Secondary shredder of the brand Lindner Komet 1100 good condition little run 130 KW
used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg
new
New and unused high-performance shredder type Lindner Power Comet 2800 with pointed knife!. Drive power 2 x 132 kW. 186 pointed knife 43 x 43 mm. Ideal for document destruction, plastic shredding. Weight 29500 kg! Complete with control cabinet, Filling hopper, extraction hood and spare parts package.
Complete RDF installation, consisting of: first shredder Lindner Jupiter 1800 second shredder Lindner Komet 2800 windshifter eddy current and magnet dust filter all conveyors
Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work
Div. fuses z.B Lindner new product for 30% reduction 6 PCs. original packed to 50.-NET. Others on request. Info under 0170 / 2204056 Mail to fa.raupp@t-online
workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y: 600mm/400mm, table dimensions X/Y: 800mm/400mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/2350mm, weight: approx. 2500kg, control: 2-axis digital readout Heidenhain (retrofitted). Including various accessories. On-site inspection is possible.
CHAIN NEXTRACTION BELT N O W A T R E D U C E D P R I C E , 4.350 mm long With central chain transport and paddles Flat type on supports Stainless steel structure Construction year 2013 500 mm.outer width 400 mm.inside width
Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width
2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - / Contact us at -
workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
