Inv. Num. : 8310 Type: S8 Robo Mig XT Producer: Lorch Generated: Parameters: Maximum arm reach: 1951 mm Number of axles: 6 pieces Maximum load capacity: 5/10 kg Robot travel: 4700 mm Application A: 2251 mm Areas of application B: 1951 mm Areas of application C: 49 mm Areas of application D: 1257 mm Areas of application E: 986 mm Equipment: Technical documentation Parts of the workplace: Comau Arc Robot 4.5.1945 Lorch S8 Robo Mig XT Welding Machine Anti-collision device Burner cleaning station 2 orbital positioning stages Horizontal Positioning Table Gudel Travel System Switchboard SAFETY safety system
Machine type: MIG/MAG welding machine Make Lorch Type Saprom 905 Connection voltage 3 x 400 volts Adjustment range 25 - 400 amps Duty cycle 40% ED at 400 amps 60% ED at 350 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case, Robot interface and 5 mtr. VB Cable Wire Feeder Gearbox 4-Roller Gearbox Fuse 32 Amps Dimensions L x W x H 900 x 420 x 1,235 mm Weight 123.5 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Li ...
Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...
LORCH HR 918 REMOTE CONTROL LORCH HR 918 remote control As new. For details see Lorch With conversion kit to CAN bus (if this is not already on your machine) Price: €500 ex VAT
--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + S5-RoboMIG XT - Collaborative MIG-MAG welding - Welding machine: S5 RoboMIG XT Cobot - Incl. FullProcess: All Lorch SpeedProcesses included SAY GOODBYE TO SKILLS SHORTAGES, COST PRESSURES AND TECHNOLOGICAL GAPS With Lorch Cobot Welding Solutions, you can relieve your employees and increase productivity and profitability by optimizing the use of your human resources. Reduce waste, rework, and costs with consistent performance and reproducible results of the highest quality. Stay future-proof and position yourself as an attractive employer for young, tech-savvy talents with this practical step towards Industry 4.0. REPRODUCIBLE PERFECT ...
--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + V 30 AC-DC - Collaborative TIG welding - Welding machine: V30 AC-DC Cobot - Optional: digitally fully integrated cold wire feed EASY PROGRAMMING With the free-drive function, welders show the cobot where it should weld by hand – including intermediate waypoints and sections. Operators can then perform the tasks precisely with the help of the robot. The optional multifunction flange also allows programming directly on the 6th robot joint to avoid unnecessary walking distances. SECURE AND FLEXIBLE The safety concept consisting of laser and function probe ensures that the operator is not within the radius of movement of the robot arm ...
An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.
turning diameter: 125 mm turning length: 560 mm swing diameter over bed slide: 250 mm turning speeds: 30-3000 U/min total power requirement: 10 kW weight of the machine ca.: 1.5 t dimensions of the machine ca.: 2 x 2 x1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ampere: 29,5 protection: P 31 fabric-no.: 812122 frequency: 50 Hz weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories
