We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Maggi Boring 23 Multi-Spindle Drill Spindle spacing: 32 mm Number of spindles: 23 Distance between first and last drill bit: 704 mm Max. drilling depth: 55 mm Number of pneumatic clamps: 4 Max. height of clamps above the table: 70 mm Operating pressure: 6 – 8 bar Air consumption: 10 l/cycle Engine speed: 2800 rpm Total power: 1.5 kW Noise level: 76.1 dB Net price
Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards
Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
: 3 St. : 120 mm Feed speed: m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Delivery without tripod / optionally the following tripods can be selected: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;
Cutting height at 90Â: 200 mm; Cutting length: 570 mm; Horizontal mitre range: 0 - 45Â; Miter range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 565 mm; Speed: 2800rpm; Motor power: 5.5 kW; Engine brake: yes; Suction port: 100mm; Machine length: Machine width: Weight: 310kg;
Roles: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod selectable: Supplied without tripod / optionally the following tripods are selectable: Standard / 1050 / PLUS with counter; Motor power: 1 / 0.7kW;
Roles: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Supplied without tripod / optionally the following tripods are selectable: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;
Cutting height at 90Â: 125 mm; Cutting length: 570 mm; Mitre range horizontal: 0 - 45Â; Mitre range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 400 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 60mm; Machine Length: Machine Width: Weight: 180kg;
Cutting height at 90Â: 200 mm; Cutting length: 570 mm; Mitre range horizontal: 0 - 45Â; Mitre range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 565 mm; Speed: 2800rpm; Motor power: 5.5 kW; Engine brake: yes; Suction port: 100mm; Machine Length: Machine Width: Weight: 310kg;
Roles: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Supplied without tripod / optionally the following tripods are selectable: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;