Model
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Model
(Manufacturer:

MATEC)

30L 1
A20 1
 
boring mills and machining centers / Processing Centers
date: 22.10.2026
approved
dealer
item-No.: 162751883
New in: 2011 used
approved
Location: de

Key data: 3000 mm, 800 mm, 1000 mm

Universal machining center Travel x/ y/ z = 3000 / 800 / 1000 mm Spindle speed up to 15000 1/min Spindle drive power 30 KW - 190 Nm Tool magazine 48 Tool positions HSK 63 max. tool diameter 70/ 130 mm max. tool length 340/ 450 mm Max. table load 1500 kg Machine weight approx. 17500 kg - Pendulum operation - Coolant system - Chip conveyors - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swivelling milling head horizontal/vertical

boring mills and machining centers / Numerically Controlled Machining Centres
date: 25.08.2026
approved
dealer
item-No.: 162751009
New in: 2004 used
approved
Location: de
Price: 24.000 €
Key data: 3000 mm, 800 mm, 800 mm

German Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travel X/Y/Z: 3000 / 800 / 800 mm. 4-axis swivel head – PREPARATION FOR 5-AXIS MACHINING – 36-speed tool magazine – SK40 – 20–9000 rpm – 30 kW – IKZ 20 bar – 450 l tank – chip conveyor – Ethernet – central lubrication – Renishaw preparation. Condition: Tool changer overhauled. Machine in good condition and ready for demonstration under power. English Manufacturer: MATEC – Model: 30 HV – Year: 2005 – Heidenhain iTNC 530. Travels X/Y/Z: 3000 / 800 / 800 mm. 4-axis swiveling head – PREPARED FOR 5-AXIS MACHINING – 36-position tool magazine – SK40 – 20–9000 rpm – 30 kW – 20 bar through-spindle coolant – 450 L tank – Chip conveyor – Ethernet – Central lubrication – Renishaw probe preparation. Condition: Tool changer overhauled. Machine in good workin ...

boring mills and machining centers / Numerically Controlled Machining Centres
date: 16.07.2026
approved
dealer
item-No.: 162749276
New in: 2008 used
approved
Location: de

CNC Machining Center Matec 40 HV Control: Heidenhain iTNC 530 Year of Make: 2008 Internal machine no. 70 Travels: X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 1,100 mm Horizontal Z-axis: 990 mm vertical NC swivel head infinitely variable: +/- 105 degrees Tool magazine: 40-fold Tool holder: SK50 Motor spindle: 8,000 rpm / 68kW Accessories: - Chip conveyors - Partition wall prepared - Electronic handwheel - Internal coolant supply 20 bar (paper belt filter 450 l) - Full work area cladding with roof - Rinsing gun - Oil-central lubrication - Oil mist extraction system - 3D probe with radio (Renishaw RMP60)

boring mills and machining centers / Numerically Controlled Machining Centres
date: 14.10.2026
item-No.: 162745528
New in: 2013 used
Location: de

Key data: 2000 mm, 600 mm, 700 mm

5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.

boring mills and machining centers / Numerically Controlled Machining Centres
date: 05.09.2026
approved
dealer
item-No.: 162745261
New in: 2006 used
approved
Location: nl
Price: 47.500 €
Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

boring mills and machining centers / Vertical Numerically Controlled Machining Centres
date: 22.06.2026
approved
dealer
item-No.: 162741586
New in: 2004 used
approved
Location: de

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

milling machines / CNC Milling Centers
date: 23.06.2025
item-No.: 162713294
New in: 2001 used
Location: pl
Price: 14.250 €

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

beverage machines / Unpackers
date: 28.02.2025
item-No.: 162721373
used
Location: de
Price: 8.000 €

2 head unpacker built in 2000

beverage machines / Packer
date: 06.07.2023
item-No.: 158959126
New in: 2004 used
Location: de

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

beverage machines
date: 23.06.2025
item-No.: 162703933
New in: 2006 used
Location: de

The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry., Capacity: 600 crates/h 10 strokes/min., Power: 5,5 kW, Current: 10 A, Voltage: 400 V, Frequency: 50 Hz, Length: 3000 mm, Width: 1540 mm, Height: 2600 mm, Weight: 1100 kg, Formats: 24 x 0,33 L Vichy, Running direction: Right-left, Operation / Control: Simatic S7-99, Base construction: Frame, height-adjustable, Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

boring mills and machining centers
date: 25.05.2025
item-No.: 162711767
New in: 2012 used

x-travel:3000 mm y-travel:1000 mm z-travel:1200/1300 mm spindle motor:32 kW spindle taper: ISO:50 spindle turning speed range:20 - 8000 U/min feed range:1-30000 mm/min rapid traverse feeds:30 m/min total power requirement:80 kW

milling machines
date: 22.06.2025
item-No.: 162709345
New in: 1998 used
Location: de

This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information.

lathes
date: 22.06.2025
item-No.: 162709914
New in: 2010 used
Location: de

This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us.

boring mills and machining centers
date: 23.06.2025
item-No.: 162714020
New in: 2011 used

Manufacturer: Matec Model: A20 Year of Manufacture: 2011 Type of Machine: Condition: used Control: Heidenhain TNC 530 Technical Specifications: - Travel (X/Y/Z): 1100 x 560 x 560 mm - Tool Changer: 20-station automatic - Spindle Taper: SK40 - Coolant System: Through-spindle coolant supply - Extraction System: FX7002 Recent Maintenance & Upgrades: - Spindle Overhaul: Completed in 06/2023 - Spindle Belt Replacement: Recently replaced - Spindle Motor Replacement: Completed in 01/2023 Find more here - / Contact us at -

other metal working machines
date: 23.06.2025
item-No.: 162714021
New in: 2004 used

Manufacturer: Model: Year of Manufacture : Condition : Used Specifications: - X-axis travel: 2000 mm - Y-axis travel: 600 mm - Spindle taper: SK40 - Tool changer: 36-position automatic tool changer - Coolant system: Through-spindle coolant supply Find more here - / Contact us at -

milling machines
date: 22.06.2025
item-No.: 162709450
New in: 2016 used
Location: at

This 4-axis Matec MATEC 30 HV/K was manufactured in 2016, featuring a robust vertical machining center design. It includes a Heidenhain iTNC530 control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information.

milling machines
date: 22.06.2025
item-No.: 162709490
New in: 2003 used
Location: de

This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturers stand ...

boring mills and machining centers
date: 23.06.2025
item-No.: 162722825
New in: 2004 used

Manufacturer: Matec Model/Type: 30 L Year of Manufacture: 2004 Power Requirements: - Voltage: 400V - Power Consumption: 62 kW Find more here - / Contact us at -

date: 25.10.2023
item-No.: 160537790
New in: 1997 used
Location: de

x-travel: 4000 mm y-travel: 600 mm z-travel: 800 mm control: Heidehain 430 Weight: / kg voltage: 400 V turning speeds: 9000 U/min max. table load: 2700 kg rapid traverse: 30 m/min feed: 30 m/min Cone: SK40 total power requirement: 48 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

date: 25.10.2023
item-No.: 156885099
New in: 2000 used
Location: de

x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain TNC 426 tool changer for ... units: 48 turning speeds: 9000 U/min feed: 3000 mm/min rapid traverse: 30 m/min total power requirement: 15 kW svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)