Key data: 1 t, 110 mm
Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power
max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven
Key data: 200 mm, 26 U/min
Machine Type: Lead and Pull Spindle Lathe Manufacturer: MATRA Model No.: D10 Year of Make: 1975 Condition: very good Offer type: used machine Specifications Tip height: 200 / 220 mm Center width: 1600 mm Spindle bore: 52 mm Speed range: 26 - 2000 rpm Drive: 3.2 / 4.0 kW Remark: a lot of accessories Weight: 1500 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.
26 Mint Unused Hydraulic Cylinder Single Wheel with Tension Spring Manufacturer: Matra Frankfurt Article number 4641.00000.5700166Z Overall length retracted 345 mm Overall length extended 470 mm Stroke 150 mm Piston rod 63 mm Piston 80 mm Drauck 350 bar Input errors, errors and prior sale reserved.
Key data: 1 t, 110 mm
Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or hand release, without UVV Fully functional, can be visited under power
Key data: 1 t, 110 mm
Hydraulic fine press, MATRA, , up to 1000kg, table: 260x200mm, projection 110, Foot or manual release, without UVV Fully functional, energized to visit
Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below
magnetic clamping plate: 1400 - 700 mm weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 205 mm x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 300 mm workpiece height: 350 mm total power requirement: ? kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 Fanuc OM Table length (mm)L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 610 Sk40 / 8.000 / 10Hp ATC 24 Positions Chip conveyor
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Table length: 1000 mm Table width: 500 mm Longitudinal X: 800 mm Cross Y: 500 mm Vertical Z: 610 mm Positions ATC: 24 Positions APC: 0 CNC Brand: Fanuc CNC Model: OM Make Matra VMC 85 Type VMC 850 A Year 2002 Fanuc OM Table length (mm)L = 1.000 Table width (mm)W = 500 Longitudinal X (mm)X = 800 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 610 Sk40 / 8.000 / 10Hp ATC 24 Positions Chip conveyor
