Model
  • page

     1
  • Next
  • 2
  • 3
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Model
(Manufacturer:

MAZAK)

E33 1
M 4 3
 
date: 11.11.2026
approved
dealer
item-No.: 162755725
New in: 2020 used
approved TOP SELLER
Location: de

CNC lathe MAZAK QUICK TURN 200 MY With control MAZATROL SmoothG Year of Make: 2020 Turning diameter: 380 mm Machining length: 575 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven tool stations VDI 30 Various tool holders VDI 30 Hydr. 3 jaw chuck KITAGAWA 0 210 mm Various jaw sets for jaw chuck Hydr. Collet chuck with various collets Y axis , C axis Tailstock with quill Chip conveyor Foot switch for jaw chuck adjustment Coolant Setup Operating Instructions

date: 11.11.2026
item-No.: 162755677
used
Location: de

Technical Specifications Simultaneous 5-axis machining Maximum swing over bed: 760 mm Distance between centres: 1,519 mm X-axis travel: 615 mm Y-axis travel: 250 mm Z-axis travel: 1,585 mm B-axis travel: -30° to +210° X2-axis travel (lower turret): 230 mm Z2-axis travel (lower turret): 1,388 mm Main Spindle Spindle nose: A2-8 Spindle bore: 112 mm Maximum spindle speed: 3,300 rpm Spindle power: 30/22 kW Second Spindle Chuck diameter: 300 mm Maximum spindle speed: 4,000 rpm Spindle bore: 91 mm Spindle power: 26/22 kW Second spindle travel: 1,574 mm Milling Spindle Maximum spindle speed: 12,000 rpm Maximum torque: 120 Nm Single-spindle milling turret Automatic tool changer Tooling & Turrets Automatic tool changer: 40 positions Lower turret: 9-position drum turret General Information Total power requirement: 91 kV ...

milling machines / Horizontal Milling Machines
date: 11.11.2026
item-No.: 162755675
used
Location: de

MAZAK HCN 5000 III – 2019 CNC control: MAZATROL SMOOTH G X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Pallet dimensions: 500 × 500 mm Maximum pallet load: 700 kg Pallet indexing: 360,000 positions Tool magazine: 80 tools Spindle speed: 18,000 rpm Spindle motor power: 30 kW Tool probe Spindle through-coolant: 15 bar RENISHAW preparation Electronic handwheel CONCEP chip conveyor Condition: As is

boring mills and machining centers / Horizontal Processing Centers
date: 06.11.2026
approved
dealer
item-No.: 162755356
New in: 2006 used
approved
Location: de

Control Mazatrol Matrix Nexus Travel paths X/Y/Z: 730 x 730 x 740 mm Spindle speed 18,000 min-1 Tool magazine for 120 Wkz., SK 40 Pallet Changer – Palletech (6 pallets) Pallet size 500 x 500 mm NC rotary table (4th axis) High-pressure cooling by the spindle 60 barControl Mazatrol Matrix Nexus Travel paths X/Y/Z: 730 x 730 x 740 mm Spindle speed 18,000 min-1 Tool magazine for 120 Wkz., SK 40 Pallet Changer – Palletech (6 pallets) Pallet size 500 x 500 mm NC rotary table (4th axis) High-pressure cooling through the spindle 60 bar

boring mills and machining centers / Processing Centers
date: 04.11.2026
item-No.: 162755173
New in: 1996 used
Location: de

BAZ Mazak VTC 20 B M4 BJ 1996

date: 04.11.2026
item-No.: 162755170
used
Location: de

Mazak Quick turn 8 lathe with bar feeder

boring mills and machining centers / Processing Centers
date: 04.11.2026
item-No.: 162755169
New in: 2005 used
Location: de

BAZ Mazak Nexus 100 BJ 2005

date: 14.11.2026
approved
dealer
MAZAK QT-Ez 10MSY CNC Turning Centers
item-No.: 162754610
New in: 2024 used
approved
Location: us

We are pleased to offer a late-2024 Mazak QT-Ez 10MSY CNC lathe with only 637 cutting hours, located in USA. This is an exceptionally clean, well-maintained machine that is currently installed, under power, operating properly, and available for immediate delivery. It holds excellent tolerances and is equipped with an extensive range of valuable options and accessories. The machine features a Y-axis, live tooling, and a second/sub-spindle, allowing turning, milling, drilling, and tapping operations to be completed in a single setup. It is equipped with a Mazatrol SmoothEz CNC control, a 10-inch main spindle chuck, a 6-inch sub-spindle chuck, and a 12-position turret. Key Specifications Manufacturer: Mazak Model: QT-Ez 10MSY Year: Late 2024 Cutting hours: Only 637 CNC control: Mazatrol SmoothEz Maximum swing: 27.4” Maximum machining length: 20.78” Maximum bar ...

boring mills and machining centers / Vertical Processing Centers
date: 30.10.2026
approved
dealer
item-No.: 162754176
used
approved
Location: cz

The machine is in good technical condition; testing is possible by prior arrangement. Control system: Mazatrol MATRIX 2. Table clamping surface: 1300 × 550 mm. X-axis travel: 1050 mm. Y-axis travel: 530 mm. Z-axis travel: 510 mm. Spindle speed: 10 – 12,000 rpm. Number of controlled axes: 3. Through-spindle coolant: Yes. Coolant pressure: 15 bar. Spindle taper: ISO 40. Max. table load: 1200 kg. Tool magazine: Yes. Number of magazine positions: 30. Number of pallets: 2. Machine weight: 7700 kg. Coolant enclosure (required for chip evacuation). Rear chip conveyor outlet (left and right). Preparation for optical probe (MMS-B OMP60). Automatic tool length measurement and breakage detection. Automatic pre-drilling cycle with load detection. Synchronized tapping. 2-pallet changer with safety enclosure. Preparation for high-pressure coolant. Renishaw OMP 60 probe. Renishaw CAT 40 tool shank.  ...

date: 20.10.2026
approved
dealer
item-No.: 162754168
New in: 2004 used
approved
Location: de

Key data: 915 mm, 6000 mm

1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.

boring mills and machining centers / Processing Centers
date: 19.10.2026
item-No.: 162754025
New in: 2024 used
Location: de

BAZ Mazak QT 200 MSY BJ 2024

date: 08.10.2026
approved
dealer
item-No.: 162753505
New in: 2010 used
approved
Location: nl

Key data: 660 mm, 995 mm

We hereby offer this neat CNC lathe and milling machine. It is a Mazak Integrex 200-IV S from 2010 with the Mazatrol Matrix control. Technical data: Turning diameter: 260 – 660 mm Max. turning length: 1495 mm Bar Passage: 65 mm X-axis travel: 580 mm Y-axis travel: 150 mm Travel Z-axis: 1,045mm Travel W-axis: 1,050mm B-axis travels -30 to 210° Main and sub-spindle: 5,000 1/min. Milling spindle: 12,000 1/min. (Capto C6) Tool magazine: 40 tool positions We can imagine that you would like more information or would like to view the machine. In this case, please contact us with your company details so that we can contact you. About Mamach Machinehandel B.V. : With over 40 years of experience in the CNC machine business, we are now one of the leading suppliers of metalworking machines in Europe. Our success is based on high q ...

boring mills and machining centers / Vertical Numerically Controlled Machining Centres
date: 12.11.2026
approved
dealer
item-No.: 162753145
New in: 2023 used
approved
Location: cz

Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe

milling machines
date: 17.09.2026
MAZAK E33 Milling cutters
item-No.: 162752165
New in: 1958 used
Location: de

Test

boring mills and machining centers / Vertical Processing Centers
date: 30.09.2026
approved
dealer
item-No.: 162751945
New in: 1996 used
approved
Location: bg
Price: 10.000 €
Key data: 1120 mm, 510 mm, 510 mm

CNC vertical machine center. Control unit - MAZATROL M32B Dimensions: 4000x3000x3000mm Table: 1460x510mm Max material weight: 800kg Automatic magazine: 24 tools Tool holder: CAT 40

date: 08.09.2026
approved
dealer
item-No.: 162751656
New in: 2006 used
approved
Location: dk

Key data: 420 mm, 1538 mm, 3300 1/min

Stock No.: 4038 CNC LATHE Manufacturer: Mazak, Type: QTN-350MY Serial No.: -, Year of Make: 2006 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm Dia. Turning length 1538 mm Main engine power 30 Main spindle speed range 3300 rpm Spindle bore 105 mm dia. C axis - main spindle movement 0.001 Tool turret with 12 stations Motor Power Driving Tools 7.5 Powered tools 4500 rpm Control Mazatrol 640T Nexus Controlled in X-Z-C-Y Accessories:                             Hydraulic Main Center Chuck 300 Driving angle tools 1 piece Driving Tools Straight 1 pc. Controlled tailstock                 Hydr. Bezel SMW SLU-32 50-200 mm Dimensions: Length: 4300 mm, Height: 2400 mm, Width: 2600 mm, Weight: 8600 kg

boring mills and machining centers / Numerically Controlled Machining Centres
date: 07.09.2026
approved
dealer
item-No.: 162751638
New in: 2017 used
approved
Location: nl

Key data: 1050 mm, 530 mm, 510 mm

CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, right - Cooling by the spindle 15 bar - Total spindle runtime 8,074 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

sheet metal working / Axis Laser Processing Equipment
date: 04.09.2026
approved
dealer
item-No.: 162751521
used
approved
Location: it

Mazak Laser Cutting Model: SUPER TURBO X-48 HI-PRO SUPERCHARGED - CO2 Power : 2000 W Working range : 2500×1250 mm Year of construction : 1995 Available: from mid-December 2026 - Currently in use – Visible in use . All manuals available.

date: 03.09.2026
approved
dealer
item-No.: 162751498
New in: 2020 used
approved
Location: sk

CNC Turning Center MAZAK QT-COMPACT 200M L.

boring mills and machining centers / Processing Centers
date: 03.09.2026
approved
dealer
item-No.: 162751495
New in: 2018 used
approved
Location: nl

Key data: 1050 mm, 530 mm, 510 mm

Mazak VCN 530C CNC Vertical Machining Center CNC control: Mazatrol Smooth G Machine table: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor, left - Cooling by the spindle 15 bar - Kitagawa NC Rotary Table MR 200 - Total spindle runtime 3,454 hours If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

date: 24.08.2026
approved
dealer
item-No.: 162750989
New in: 2007 used
approved
Location: de

Key data: 660 mm, 1500 mm

X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader

date: 24.08.2026
approved
dealer
item-No.: 162750987
New in: 2015 used
approved
Location: de

Key data: 380 mm, 1000 mm

Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation

date: 24.08.2026
approved
dealer
item-No.: 162750986
used
approved
Location: de

Key data: 380 mm, 1019 mm

X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12

boring mills and machining centers / Numerically Controlled Machining Centres
date: 24.08.2026
approved
dealer
item-No.: 162750985
New in: 2007 used
approved
Location: de

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

boring mills and machining centers / Processing Centers
date: 24.08.2026
approved
dealer
item-No.: 162750984
New in: 2003 used
approved
Location: de

Key data: 1740 mm, 760 mm, 660 mm

Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark

boring mills and machining centers / Numerically Controlled Machining Centres
date: 24.08.2026
approved
dealer
item-No.: 162750983
New in: 2011 used
approved
Location: de

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

date: 30.10.2026
approved
dealer
item-No.: 162750838
New in: 2001 used
approved
Location: cz

malfunctioning control unit

date: 08.10.2026
approved
dealer
item-No.: 162749883
New in: 2010 used
approved
Location: nl

Key data: 660 mm, 1495 mm

Mazak Integrex 200-lV ST CNC turning-milling center with second spindle CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Spindle speed 35 - 5000 rpm Spindle speed sub spindle 35 - 5000 rpm Milling head speed 15 - 21,500 rpm X-axis travel 580 mm Y-axis travel 160 mm Travel of the Z-axis 1,545 mm Travel of the B-axis 225 ° C-axis indexing 0.0001° (360°) Tool Taper Capto C6 Number of tools in the magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

boring mills and machining centers / Numerically Controlled Machining Centres
date: 21.09.2026
approved
dealer
item-No.: 162749013
New in: 2017 used
approved
Location: nl

Key data: 1050 mm, 530 mm, 510 mm

Mazak VCN 530C CNC Vertical Machining Center for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. CNC control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine table: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40 / DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyors - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H If you have any questions about the machine, as well as an appointment for a viewing, please contact  ...

boring mills and machining centers / Horizontal Processing Centers
date: 12.11.2026
approved
dealer
item-No.: 162748699
New in: 1998 used
approved
Location: cz

Key data: 560 mm, 510 mm, 510 mm

Inv. Num. : 9279 Type: HTC 400 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol Work table length: 400 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 5.5 kW Maximum spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Number of stacking positions: 24 pieces

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)