We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of Make: 2013 Working area: 2,000 x 6,000 mm 1 x Plasma torch with power source HiFocus 161i with automatic gas console and Contour Cut Extraction table
CNC Laser Cutting Machine Fiber Laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of Make: 2015 Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head and - KEMPER suction. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Nominal power: 3,000 W (3kW) Operating Mode: CW/Modulated Power consumption: approx. 9.kW max. (8.3 kW typ.) at 3,000 W Cooling IPG Air-Water Chiller Operating hours. approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 μm with 200 μm optical fiber Weight: approx. 6.2 kg Extraction KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER ...
Oxy-fuel cnc cutting machine. Prestine condition.
Inv. Num. : 9120 Type: MSF 4001.20Ltk T500 Producer: MicroStep Created: 2016 Parameters: Laser ON: 24000 h Beam ON: 22250 h Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 20 mm Source: IPG YLS 4000W Cutting head: HIGHYAG BIMO FSC-MZ2.1 Machine height: 2570 mm Machine length: 10785 mm Machine width: 4508 mm Machine weight: 14689 kg
Inv. Num. : 9119 Type: DRM Max 3001.30PrkGb Producer: MicroStep Created: 2024 Parameters: The machine is in good condition.
Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.
Inv. Num. : 9040 Type: EasyCut 9001.30 PG Producer: MicroStep Created: 2015 Parameters: Work table length: 9000 mm Work table width: 3000 mm Plasma Source: Formica ForCUT 163WDM
Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.
Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg
MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included
MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...
CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm
Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120
Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...
Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10
MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...
Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection
Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses
Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.
Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request
This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.
This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 2500 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.
This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.
This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine.
working length: 3000 mm working width: 1500 mm plate thickness: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.