Key data: 500 mm, 600 mm
Machine Details Stock-No. 1105-04060 Type of machine CNC Lathe Make MONFORTS Type DNC 5 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis ex works Price Technical details turning diameter 520 mm turning length 600 mm control Siemens type 840 C Spindle Passage 85 mm Spindle diameter 130 mm swing diameter 560 mm Tool changer 12 Tool changer 12 turning speeds 32-4000 rpm weight of the machine approx. 13 t dimensions of the machine approx. 4.5x5.5x2.1 m Additional information Machine is equipped with a counter spindle. lots of accessories CNC SIEMENS 840 C
Control: Sinumerik 810 D with manual turn -Spindle head size 8 -Rod passage 70mm -Tip width 1080mm -Circulation Ø facing slide 260mm -Circumference Ø max 500mm -Speed range 2-2800 1/min -Documentation completely available -Ready holder -Coolant device -Tailstock -Conveyor -New 3 jaw chuck Centra Year of Make: 2001 Status: Used machine, machine is fully functional, geometry very good
Key data: 1000 mm, 3000 mm
achine details Stock-No. 1105-04028 Type of machine Lathe - cycle-controlled Make MONFORTS Type KNC 1000 x 3000 Year of manufacture 2008 Type of control NC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free load Price Technical details turning diameter 1000 mm turning length 3000 mm control MTC-K turning speed range 3-1800 rpm transmission ratio 8 SPEED TURRET VDI 40 spindle nose A2-8 swing dia. 720 mm tool holder VDI 40 chuck: SCHUNCK total power requirement 30 kW Additional information KNC 1000 X 3000 CYCLE TURN FROM 2008 WITH 2 STEADY CHUCK TURRET 8 POSITION VDI 40 CNC CONTROL MONFORTS EURO TURN CYCLE CNC NICE AND BIG MACHINE TURNIG 3000 X 1000 MM
Key data: 720 mm, 1500 mm, 4000 1/min
achine details Stock-No. 1105-04015 Type of machine CNC Lathe Make MONFORTS Type RNC 7 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin germany Delivery time to be agreed Freight basis ex Site Technical details turning diameter 720 mm turning length 1500 mm control SIEMENS 840 D turning diameter over bed 550 mm bar diameter 86 mm spindle nose A 11 turning speeds 15~ 4000 rpm drive capacity - spindle motor 37 kW turret (x-stations) 12 VDI 60 Shank diameter 60 mm Drill shank diameter 60 mm Travel -X Axis 415 mm Travel -Z AXIS 1600 mm tail stock YES slide. of quill 120 mm Quill Stroke 150 mm taper MK 4 rapid traverse X-axis 12 m/min rapid traverse Z-axis 12 m/min total power requirement 70 kW weight of the machine approx. 16 t Accessories Chip conveyor YES Additional information VERY NICE MACHINE TURNING LENG 1500 M ...
Key data: 560 mm
Monforts DNC 5, Built in 1998, Control Fanuc Series 16 T, max. swivel Ø 560 mm, 2 x C axis, 2 x Y axis +/- 50 mm, max. spindle spacing 1460 mm, Main / counter spindle chuck Ø 250 mm, max. bar passage max 82 mm, 2 turrets 12-fold driven all stations, Conveyor Machine weight 13,000 kg,
Key data: 560 mm, 260 mm, 4000 1/min
MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...
Key data: 425 mm, 1000 mm, 4000 1/min
CNC lathe Monforts RNC 5 at call The reliable RNC5 machine has a spindle bore of 40 mm and a diameter of 180 mm. Manufacturer: MONFORTS Model: RNC5 Width: 3500 MM Depth: 2340 MM Height: 1960 MM Weight: 8500 KG Main drive Spindle bore: 40 MM MOVEMENT X-AXIS : 270 MM Z-AXIS : 1020 MM Total power requirement: 32 KW Chip conveyor included - TURNING LENGTH 1000MM - SPINDLE DIAMETER 180MM - TOOLS 12 - CIRCULATING DIAMETER VIA CROSS SLIDE 425MM - ROTARY CUTTER OVER BED 600MM The machine can be viewed at any time. Free loading. Transport possible throughout Europe
Key data: 600 mm, 1000 mm, 4000 1/min
CNC lathe Monforts Type: RNC 5 High-quality high-performance lathe with a wide range of performance in universal 2- to 3-axis machining, with a turning length of 1,000 mm and a circulation diameter above bed of 600 mm. The RNC series meets all requirements; Various spindle assemblies and drive variants, Y-axis, hard turning package, automatic loading and unloading equipment, tool and workpiece measurement, tailstock and steady rest are all options available. Available with Fanuc or Siemens control. Turning diameter 600 mm Turning length 1000 mm Control MCS 800 (Siemens 840 C) Spindle speed 1 4000 1/min Spindle speed 2 4000 1/min Drive power L / R 18/24 kW Torque at the spindle 630 nM C-axis 0.001° Revolver No. 1 stations / of which driven 12/12 VDI 40 Turret No. 2 stations / of which driven 12/12 VDI 40 Speed range - milling 3000 1/min Drive power - milling spindle 8. ...
Key data: 380 mm, 500 mm, 6000 1/min
CNC machine Monforts type RNC 3 generally good condition, but currently not ready for use due to a defective electric motor. The machine has always been serviced and was in operation until recently. Sold as a spare parts donor. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844
Key data: 380 mm, 500 mm, 6000 1/min
CNC machine Monforts type RNC 3 The RNC 3 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time. Free loading. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844 Technical specifications are non-binding. Errors excepted.
Key data: 380 mm, 500 mm, 6000 1/min
CNC machine Monforts type RNC 5 The RNC 5 was in operation until September, in good condition, immediately available. Specifications - max length to rotate : 500 [mm] - max diameter to rotate : 380 [mm] - Spindle motor : 15 [kW] - Rotation speed : 6000 [rpm] - Number of VDI30 tools on turret : 12 - Rod passage : 65 [mm] Accessories - CNC FANUC 11T control - Pincer chuck -Conveyor The machine can be viewed at any time.
Machine Details Stock number 1105-03806 Machine type CNC lathe - inclined bed machine Make MONFORTS Type RNC 400 AC Year of construction 2001 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from HAGUENAU FRANCE Technical details Turning diameter 420 mm Turning length 600 mm Control SIEMENS 810 D Speed range 70 - 4000 rpm Information With C axis and driven tool holders Tool carrier disc turret VDI 40 (12pcs), bore 40 mm; Power clamping futte DIA 315 MM, chip conveyor coolant device, TAILSTOCK CNC SIEMENS 810 D 24 KW 4000 RPM good condition WITH ACCESSORIES
Monforts RNC7 Type of machine: CNC lathe Manufacturer: Monforts Model: RNC 7 Year of manufacture: 1991 Control: Fanuc Technical data: Travel X/Z 415/1100mm, tool measurement, tailstock, Röhm lathe chuck, spindle speed 4000 min-1, disc turret with VDI60 interface, number of tool places: 12, turning length (max.) 1000mm, revolving Ø over bed (max.) 720mm, revolving Ø over radial slide (max.) 550mm, dimensions: 4930x2790x2200mm without chip conveyor, weight: approx. 12000kg
This Monforts KNC 6 S was manufactured in 1999. A robust horizontal turning machine featuring a maximum turning diameter over bed of 650mm and a maximum turning length of 2,000mm. It includes an R&D control unit, enhancing its operational capabilities. If you are looking to get high-quality turning capabilities, consider the Monforts KNC 6 S machine we have for sale. Contact us for more information.
Monforts Montex 5000 5 Chamber Gas Heated Stenter High Entry with E+L KF2020 Cloth Guiders Two Bowl Padder Matex 5000 Mahlo Weft Straightener RFMC-10A x 2 sets installed & working Model : 5 F Montex 5000 Year 2001 Roller Width : 128 Over Feed for Knit Device Finger uncurler Dual Chain Pin + Clip Burner Maxon Germany Exhuast Filteration Unit Installed Cooling Fan Chain Cleaning System Exit on Plaiter & Batcher Find more here - / Contact us at -
This Monforts KNC 300 CycleTurn was manufactured in 2009. A robust horizontal turning machine, it features a spindle head DIN 55027-6, x stroke of 183 mm, and z stroke of 784 mm. Weighing 1600 kg, it offers both controlled cycle programming and DIN programmability. If you are looking to get high quality turning capabilities consider the Monforts KNC 300 CycleTurn machine we have for sale. Contact us for more information about this machine.
This MONFORTS RNC 200A lathe was manufactured in 2000. It features a maximum orbital diameter of 300mm and a turning length of 250mm. The main spindle supports a speed range of 50-6000 rpm, with a material passage of 42mm. Equipped with 12 driven stations and rapid traverse rates of 24m/min on the X/Z-axis, this machine ensures efficient and precise turning operations. The MONFORTS RNC 200A machine we have for sale is ready to meet your production needs. Delivery scope does not include a bar feeder. Contact us for more information.
Working width: 2400mm, Torch: Manufacturer: Maxon, Type: Valupak MF 300, Year of manufacture: early 2000s, Overall dimensions X/Y/Z: approx. 43m/6m/5.5m, Operating hours: 76761h, Control system: Monforts Matex-Color. Including Zimmer coating system and pre-drying system. Documentation available. On-site inspection is possible.
Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air.
turning diameter: 800 mm turning length: 2700 mm control: Monforts MTC K The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center width: 1500mm, max. turning diameter: over bed: 500mm, over cross slide: 290mm, max. spindle speed: 2800rpm, control: Monforts Control-System K, weight: 3300kg. Including Coromant Capto with inserts, workbench without tools, grating.
turning diameter:630 mm turning length:2000 mm swing diameter over bed slide:350 mm bed width:550 mm spindle diameter in front bearing:120 mm spindle drive motor:17/25 kW Spindle bore:71 mm spindle speeds::3 - 1800 tailstock-quill taper dia./stroke:110/210 mm weight of the machine ca.:5 t total power requirement:30 kW dimensions of the machine ca.:4,9 x 2,2 x 2,0 m Machine with Monforts System Euro Turn Zyklensteuerung - Mulitfix quick tool change device - steady rest - coolant device, chip conveyor - 3-jaw chuck
This Monforts TNC 300 SingleTurn was manufactured in 2009. A robust horizontal turning machine featuring a Fanuc 0i-TC control system, 10 tool stations, and a three-jaw power chuck Kitagawa 8. It includes a hydraulic hollow clamping device and a chip conveyor. Ideal for high-quality turning capabilities. Contact us for more information about this machine.
Manufacturer: Monforts Model: RNC 500 Single Year of Manufacture: 2008 Type of Machine: CNC Lathe SingleTurn (without driven tools) Tailstock: No Chuck: SMW / KNCS-N-315-91 Control: 840D sl Bar capacity: max. 500 mm Tool holder: Disc turret VDI 40 (12 positions) Spindle run time: approx. 18,000 hours Find more here - / Contact us at -
Manufacturer: Monforts Model: RNC 500 Multi Year of Manufacture: 2007 Type of Machine: CNC Lathe MultiTurn (with driven tools) Tailstock: No Chuck: SMW / KNCS-N-315-91 Control system: 840D sl Bar capacity: max. 500mm Tool holder: Turret VDI 40 (12 pieces) Spindle operating time: approx. 18,000 hours Find more here - / Contact us at -
Monforts DNC5 CNC Lathe for sale. control unit: Siemens 810D Find more here - / Contact us at -
centre distance: 2600 mm weight: 8 t : multifix: : 900 mm serial number: 152/03 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1000 mm turning length: 1500 mm control: Siemens 840 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. -No.: 10374 Manufacturer: MONFORTS Year of construction: 2000 Type of control: Zyklen gesteuert Control: MONFORTS Control Storage location: Halberstadt Country of origin: Germany
Type: RNC 5 Plus Mayfran chipconveyor Swing over bed: 600 mm Swing over cross-slide: 425 mm Distance centre tot centre: 1000 mm Spindle cone: A8 Dia of spindle bore: 96 mm Power on the spindle: 18,5 kW Number of speeds: 1 > 4000 rpm Command: GE Fanuc16-T ACCESORIES: yes Toolchanger: yes Number of tools: 12 VDI toolpositions
