Vertical band saw in good condition Cutting width: max. 400 mm Cutting height: max. 230 mm 540 kg
Mössner Rekord SFF 1050 Vertical Band Saw Dqnqed -Year of construction 1996 -Automatic table feed -Projection 1050mm -Passage height approx. 400mm -Saw band welding device / Ideal -Stepless speed regulation -Control panel -Work light Dimensions: LxWxH 2x2x2.1 meters / Weight: 1850 kg
Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min
Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are newly rubberized / re-occupied IDEAL Tape Welding Machine Table tilted
Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable
roll diameter: 420 mm throat: 410 mm workpiece height: ca. 210 mm table-size: 600 x 600 mm table - tiltable: 45 ° total power requirement: 1,7 kW weight of the machine ca.: 0,6 t - machine out of teaching shop - - with sawband welding and grinding device - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 420 mm workpiece height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 930 mm workpiece height: 378 mm cutting speed: stufenlos m/min table surface area: 780 x 800 mm band length: 4820 - 4920 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2,0 x 1,0 x 2,2 m Band saw with - Ideal saw blade welding device - Grinding stone - Machine light - Accessories see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: / mm throat: / mm workpiece height: / mm cutting diameter: / mm saw band length: / mm table-size: 600 x 600 mm total power requirement: / kW weight of the machine ca.: ca. 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical band saw MÖSSNER type Rekord SM 420 Masch. No. 25615 Year of construction 1983 Roll diameter 420 mm Projection in width 410 mm Projection in height 295 mm Table size 600 x 600 mm Belt speed 12-375 m/min. 8 steps Saw blade length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 Volt, 50 Hz - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guidance Height adjustment with handwheel - Work table tiltable +/-45 - Work table tiltable 10- Foot switch for on-off Space requirement L x W x H 1000 x 800 x 1970 mm Weight approx. 600 kg very good condition; used
Vertical band saw machine MÖSSNER type SSF 500Machine -No: 10077 built in 1961Technical specifications:Roll diameter: 500mmProjection: 485 mmTable size: 600 x 700 mmTable swivelling:+/- 15°Drive power: 2.0 kWWeight approx.: 800 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Height under guides: 420 mm Throat: 420 mm Table length: 0 mm Table width: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat Vertical bandsaw Cutting capacity 90 ˚ Ø420 mm Cutting speed M/min 18 - 2280 M/min
roll diameter: 420 mm throat: 410 mm workpiece height: 295 mm cutting speed: 12 - 375 m/min table surface area: 600 x 600 mm saw band length: 3150-3260 // 3-16 mm work height max.: 1020 mm voltage: 380 V total power requirement: 1,1 / 1,7 kW weight of the machine ca.: 620 kg dimensions of the machine ca.: 1000 x 800 x 1900 mm from a maintenance workshop - good condition () Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
