Optimum Optiturn TZ 4V Archive Image YOC: 2017 Areas of work: - Center height: 200 mm - Center width: 800 mm - Circulation diameter over machine bed: 400 mm - Rotation diameter over face slide: 245 mm - Bed width: 260 mm Range: - Number of speed ranges: 2 - Speed range: 50 – 3000 rpm⁻¹ Electrical data: - Power drive motor: 5.5 kW - Operating mode: S6 - Duty cycle: 60 % - Connection voltage: 400 V - Mains frequency: 50 Hz Cooling lubricant system: - Coolant pump power: 0.125 kW - Tank capacity: 20 l Engine(s): - Drive motor stages: 2 Standards and approvals: - Standard: DIN EN 55011 - EMC class: C3 Tailstock: - Recording: MK 3 - Quill stroke: 110 mm - Quill diameter: 50 mm Spindle: - Spindle holder: DIN ISO 702-1 No. 5 Form A2 - Spindle bore/rod passage diameter: 52 mm - Spindle cone: MK 6 Gradients: - Pitch Metric: 0.2 – 14 mm/ ...
Lead and Pull Spindle Lathe OPTIturn TH 3309D Technical details and features: Manufacturer: Optimum Model: OPTIturn TH 3309D Year of construction: 2024 Condition: New machine Shipping time: Immediately available (subject to prior sale) Dimensions and weight: Length (product): approx. 1685 mm Width/depth (product): approx. 745 mm Height (product): approx. 1590 mm Weight (net): 512 kg Areas of work: Tip height: 165 mm Center width: 830 mm Circumferential diameter over machine bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Range: Number of speed ranges: 16 Speed range: 70 – 2000 rpm⁻¹ Electrical data Power drive motor: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/rod passage diameter: 38 mm Steel holder mount ...
Band Saw Optimum OPTIsaw S 275NV Article number: 19-03-027 Manufacturer: Optimum New machine Delivery time: immediately available Machine workshop tested Year of construction: 2024 L x W x H: approx. 1400x700x1700mm Weight: approx. 185kg Electrical data: Power drive motor: 1.5 kW supply voltage 230V Machine data: Saw blade speed(s): 20 – 90m/min Saw blade length: 2480mm Saw Band Width: 27mm Saw blade thickness: 0.9mm Cutting angle: 0-60 degrees Lifting of the saw bracket: manual Cutting areas: Cutting range 0° round (solid material) 225mm Cutting range 0° square (solid material) 190mm Cutting area 0° rectangle horizontal (solid material) 150x245mm Cutting range +45° round (solid material) 145mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangle lying (solid material) 190x150mm Cutting range +60° round (solid ...
Optimum 275 G Demonstration Machine Model: Opti S 275 G Specifications: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable
Inv. Num. : 7877 Type: TH 4010 Producer: OPTIMUM Created: 2018 Parameters: Maximum turning length: 1000 mm Maximum turning diameter over bed: 410 mm Minimum spindle speed: 45 1/min Maximum spindle speed: 1800 1/min Cone: MK 3 Rotary spindle pass-through diameter: 52 mm Power consumption: 1.5/2.4 kW Length: 1920 mm Width: 740 mm Height: 1222 mm
Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg
Parallel Lathe OPTIMUM D330 x 1000 SG Between points: 1000 mm Maxi Ø on bench: 330 mm Maxi Ø over saddle: 195 mm Spindle diameter: Ø 39 mm Spindle speed: from 70 à 2000 RPM 3-jaws chuck Ø 160 mm Year of construction: 2006 Threadings: Metric + Whitworth Tailstock: CM3 Auto advances longitudinal + transverse Brocken Bed Square turret Supplied with some soft jaws 1 fixed steady + 1 follow steady 1 4-jaws chuck Ø 200 mm 1 false platform Ø 255 mm Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 900 kg
Specifications: Drilling capacity steel: 24 mm Continuous drilling capacity steel: 20 mm Drill-milling head vertical: +/- 45° Milling head horizontal: +/- 90° Table size: 1370 x 254 mm Travel X / Y / Z - axis manual: 820 / 410 / 400 mm X / Y / Z - axis automatic: 740 / 330 / 320 mm Distance vertical spindle - router table max.: 405 mm Spindle mount: SK40 Projection: 420 mm Speed range, infinitely variable: (2) 60 - 4200 1/min Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04 / 0.08 / 0.15 mm/rev Milling head Y - axis: 470 mm Connection: 400 V Total power: 3 kW Weight, approx.: 1260 kg Dimensions (WxDxH), approx.: 1820 x 1850 x 2230 mm Equipment: - 3-axis digital display - Infinitely variable speed control - Coolant device - Clockwise / anticlockwise rotation - Motorized feed in the X, Y and Z axes - Drilling depth stop and scale - Cross table wit ...
Key data: 266 mm, 700 mm
- Siemens Sinumerik 802S CNC control - 3-jaw chuck with interchangeable jaws Ø 120 mm - 4-fold tool changer - Coolant device - Full enclosure - Year of construction 2013 Specification - Center width: 700 mm - Center height: 140 mm - Circumferential Ø above bed: 266 mm - Spindle bore: 26 mm - Spindle cone: MK4 - Bed width: 180 mm - Spindle speed: 30 - 4000 rpm - Speed levels: 30-300 / 140-1400 / 300-3000 / 400-4000 rpm - X-axis travel: 180 mm - Z-axis travel: 465 mm - Feed speed X-axis: 3000 mm/min - Feed speed Z-axis: 2500 mm/min - Tool slots in the tool changer: 4 - Tool changer pick-up height: max. 12 mm - Tailstock mount: MK2 - Tailstock quill stroke: 85 mm - Motor power: 1.5 kW - Coolant pump motor power: 40 W - Coolant tank capacity: 12 l - Machine dimensions WxHxD: 1685 x 1885 x 805 mm - Weight: approx. 420 kg
Drilling capacity steel/GG: 35/40 mm Spindle mount: 4 MK Projection: 350 mm Table size: 560 x 560 mm Quill stroke: 180 mm Spindle speeds: 30 - 1450 rpm Feeds: 0.1/0.2 mm Drive motor: 400 V, 0.75/1.5 kW Space requirements: 900 x 550 x 2300 mm Weight: approx. 500 kg
Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V
Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230
Travel X/Y/Z: 600mm/480mm/390mm, speed: 2550rpm, table dimensions X/Y: 900mm/500mm, max. table load: 360kg, feed rate: 600mm/min. Machine dimensions X/Y/Z: approx. 1650mm/1850mm/1900mm, weight: approx. 1900kg, digital display: Newall OP 700, documentation available. On-site inspection is possible.
Motor power: 1.1kW / 230V; Cutting area: 100mm x 145mm; Feed: infinitely variable; Saw blade speed: 22 / 31 / 55 m/min; Saw blade dimension: 1638 x 13 x 0.65 mm; Cutting angle: -45Â to 60Â; Dimension: 1085mm x 498mm x 978mm; Weight: 78kg; Circuit breaker for the belt cover and the saw blade cover in low-voltage designSeparate emergency stop impact switchLow-voltage electronics 24 VGerlow-running Mobile machine substructureBall-bearing saw blade guideThree speed levels for a wide-ranging
Power: 750W/230V; Drilling capacity steel: 11mm diameter; Speed range: 100 †3000 rpm; Speed levels: infinitely variable; Spindle holder: B16; Drilling stroke: 60 mm; Spindle projection: 235mm; Table size: 290 x 290 mm; Quick-release chuck: 1 - 13 mm; Weight: 51 kg;
: 275 mm : miter: saw band length: mm : ohne Rollenbahn The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Optimum Optidrill DH 32GSV Admission in drilling-spindle (morse): Mk3 Max drill capacity: 30 mm Table dimensions: 420 x 400 mm SPEEDS: 40 > 3000 rpm Max drilling depth: 125 mm Motorpower: 2,2 kW Length: 820 mm Depth : 450 mm Height: 2230 mm Weight: 324 kg
Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg
Travel X/Z: 185mm/540mm, feed X/Z: 6m/min/8m/min, repeat accuracy: +/-0.015mm, positioning accuracy: +/-0.03mm, tool positions: 8, spindle bore: 46mm, center distance: 800mm, center height: 170mm, orbital diameter over bed/face slide: 340mm/152mm, bed width: 208mm, speed: 4000rpm, lathe chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 1200kg, control: Siemens Sinumerik 808D. Documentation available. On-site inspection is possible.
Univ. Drilling and Milling Machine OPTIMUM Type Opti F 30 Vario with Workbench SubstructureArticle No. 301 3303, Fabr. No. 684898, year of construction 2006Drilling capacity in steel max. 32 mmMilling capacity with cutter head max. 76 mmMilling capacity end mill max. 20 mmTravel X: 430 mm, Y: 185 mm, Z: 465 mmTable size 730 x 210 mm with 16 mm T-slot projection 205 mmColumn diameter 115 mmSpindle holder MK 3Spindle speed 35 - 3300 rpm, infinitely variableQuill stroke 130 mmMotor power 1.5 kWNet connection 400 volts, 50 Hz
Metal band saw OPTIMUM OPTIsaw S275N - Exhibition machine - feed infinitely adjustable, swivelling ---------- Technical data ---------- Swivel range: 0 - 60 Â, cutting height: 150 mm, cutting depth: 230 mm, saw blade speed: 45 / 90 m/min., saw blade length: 2,480 mm, motor 400 V: 1.1 kW, dimensions (LxWxH): 1,400 x 530 x 1,360 mm, weight: 185 kg - new exhibition machine -
- Exhibition machine - Feed infinitely adjustable, swivelling ---------- Technical data ---------- Swivel range: 0 - 60 , Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min., Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg new exhibition machine
Motor power: 1.1kW / 400V; Cutting area: 100mm x 145mm; Coolant Facility: Yes; Feed: infinitely variable; Saw blade speed: 45 /90 m/min; Saw blade dimension: 2480 x 27 x 0.9 mm; Cutting angle: 0Â to 60Â; Dimension: 1400mm x 685mm x 1235mm; Weight: 185kg; Low-noise running Stable cast iron design High cutting accuracy due to vibration-free running Lowering of the saw bracket via hydraulic cylinder with throttle valve Microswitch for automatic limit shutdown Coolant device Standard with high-quality bi-metal saw blade Adjustable material stop for series work Robust machine substructure Ball-bearing saw blade guide Quick-release vise adjustable via handwheel. Clamping the workpiece with handy quick-release lever Easy-to-read scale for angle adjustment overload protection S 275N motor protection switch Two switchable speeds
Power: 0.85, 1.5kW; Speed range: 300 - 4000 rpm; Speed levels: infinitely variable; Spindle holder: MK-3; Drilling stroke: approx. 105 mm; Spindle projection: 200 mm; Weight: 152 kg; Smooth-running and powerful electric motor Two speed levels Clockwise/counterclockwise rotation V-belt cover with safety switch Digital speed display integrated in the housing Concentricity guaranteed less than 0.015 mm measured in the drilling quill Height-adjustable chuck protection with microswitch for the greatest possible protection of the user Machine light integrated in the drilling head Drilling spindle with precision ball bearing High-quality keyless chuck as standard Precisely machined drilling table with diagonally running T-slots, 360Â rotatable with circumferential cooling water channel Thick-walled cast column for high force absorption and stability Solid base plate, large dimensions, ...
: 275 mm : miter: saw band length: mm : ohne Rollenbahn The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Exhibition machine - feed infinitely adjustable, swivelling---------- Technical data ---------- Swivel range: 0 - 60 , Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min., Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg new exhibition machine
