Automatic feed via E555 control with Windows operating system For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device
Lenght 6 m E355 positioner controller Saw diameter 420 mm
Elumatec SBZ 131 7.2 m 3 Axis CNC machine Year: 05/2018 Processing length: 7,200 mm X-Axis: max. 7,200 mm Y-Axis: max 485 / 310 mm Z-Axis: max 340 / 260 mm Spindle: 6,000 rpm 6 kW S1 Tool holder BT 30 Tool changer: 8 Clamps: 8 Operation hours: 30.762 Spindle hours: 11.582 Bar code scanner Two separate working zones enable machining in shuttle operation. There is also a central laser scanner on the operator's side to protect the area for maximum safety. + camera Angle routing heads 18.000 rpm High-speed spindle 18,000 rpm
Elumatec SBZ 151 13.3 m 5 Axis CNC machine Year: 02/2017 Processing length: 13,300 mm Saw blade: 500 mm X-Axis: max. 13,300 mm Y-Axis: max 1,150 mm Z-Axis: max 715 mm A-Axis: +/- 110° C-Axis: +/- 180° Spindle: 24,000 rpm 21 kW S1 Tool holder HSK 63F Tool chamger 20 + 1 (saw blade) Clamps: 16 Operation hours: 39.696 Spindle hours: 23.042 Bar code scanner Two separate working zones enable machining in shuttle operation. There is also a central laser scanner on the operator's side to protect the area for maximum safety. + camera Automatic length measurement on both sides with Z travel Tapping without compensation chuck Double clamp
Year: 2012 - technically efficient, ready to work – after full service - hydropneumatic control - pneumatic profile clamping - support arms - adjustable blades
3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg
Key data: 380 mm
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 355 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation Material support mobile and fixed 850 kg
For milling transom and door profiles made of aluminium and plastic Swivel range material stop: up to 60° to the right & left Max. milling height: 150 mm Max. milling depth: 110 mm Max. milling length: 400 mm Max. profile height: 200 mm Max. cutter diameter: 280 mm Milling motor: 2.5 kW Speed: 2,800 1/min
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Label printer
Year: 2005 - technically efficient, ready to work – after full service - 3 engines - pneumatic clamps - copying templates - roller feeders with gauges (right + left)
Hydro-pneumatic punch Specifications: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg -with: - Footswitch - Original machine base - Pressure gauge + pressure regulator - Round changing table for 6 punching tools - Various punching tools
ELUMATEC SBZ 618 machining center was built in 2014 in Germany by Elumatec AG. The machine enables fully automatic machining of profiles made of steel, aluminium and PVC. Its excellent machining parameters and high precision make it an excellent choice for businesses associated with e.g. window or door manufacturing. The profiles are cut by a reliable saw with a 550 mm diameter and with an angle adjustment range of -22.5° to +22.5°. The machining unit is also equipped with a reliable spindle for milling and hole-making. The ELUMATEC profile machining center is offered with a wide range of equipment, including a magazine capable of accommodating 10 profiles as well as a barcode scanner and label printer. The total weight of the machine is approximately 5500 kg. Technical specifications of the ELUMATEC SBZ 618 profile drilling and cutting center - maximum workpiece length: 4000 mm - ...
Year: 2006 - technically efficient, ready to work - after full service - copy template - pneumatic profile clamps - centering - compressed air preparation station - handle function (automatic feed)
Key data: 550 mm
We offer a used Elumatec DG244 double miter saw 6.0m - With short-dimension stop - Profile stop strip set - Roller conveyor 1.5m, 400 mm wide - Workpiece support can be moved - Cross-cut and overlength software module for E355/E555 - Software connection E355/E555 for window program - Suction unit DG 244 complete 2 pieces
For aluminium and PVC profiles Max. cutter diameter: 280 mm Max. milling length: 400 mm Max. milling depth: 110 mm Max. profile height: 150 mm Pneumatic material tensioners Manual feed Minimum quantity spraying Weight: approx. 200 kg
Key data: 500 mm
Max. saw blade diameter: 500 mm Max. feed length: 650 mm (1-fold) Digital display of feed length Chip extraction Pneumatic material feed Pneumatic saw feed Minimum quantity spraying device Multi-cycle selector switch Unit counter with automatic switch-off Selector switch for cutting height Weight: 800 kg
Year: 2000 - technically efficient, ready to work - after full service - cutting length: 3000 mm - discs: 500 mm (from the bottom) - FERROCONTROL control - vertical and horizontal pneumatic clamps - automatically lowered and raised disc guards - profile support - cutting according to external dimensions, without correction - pneumatic angle adjustment 45-90 degrees
Manual length adjustment via hand slider For mounting on any Elumatec single-head saw (right) Max. feed length: 6,000 mm
Key data: 550 mm
CNC double mitre saw Fabr. ELUMATEC Type DG 204/6000 Built in 1993 Saw blade diameter 550 mm max. cutting length 6000 mm Drive power 2 x 4 kW Kl. Cutting length at 90 degrees 335 mm Kl. Cutting length at 45 degrees inclined 335 mm Pivoting range. Indoor 90 - 22.5 / 45 degrees Swivel range n outside 140 degrees Saw blade speed 2800 rpm Weight 2.1 t External dimensions 7660 x 1400 x 1600 mm with CNC Control Roller bezel Label printer
Key data: 550 mm
Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Length and angle adjustment via control E 255 Digital angle displays for tilt and pan Moving roller conveyor Minimum quantity spraying device Weight: 2000 kg Machine is dismantled (see last photo) and is loaded freely
ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of choiceing single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...
Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 2100 kg -with: - ELUMATEC E 355 control system - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - 2 x suction system fixed + moving along - Separate control cabinet ...
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
Inv. Num. : 7509 Type: DG 79/31 M Producer: Elumatec Created: 2009 Parameters: Maximum sawing speed: 2800 1/min Cutting length: 520 mm Wheel diameter: 380 mm Motor power: 3 kW
The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...
Key data: 550 mm
Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via E 355 Digital angle indicators on both units for pan and tilt Travelling roller conveyor Material Pad Minimum Quantity Spraying Device Machine is loaded freely
Key data: 420 mm
elumatec Double Mitre Saw DG104 Year of construction: 1995 Control: E255 Saw blade diameter 420 mm Saw blade bore 30 mm Cutting length 6000 mm Tilt range 45 + 90° Inward swivel range 90 - 22.5° Saw blade speed 2800 rpm. Smallest cutting length 335 mm Power 2 x 4000 W
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
