PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...
Specifications: Max. bending capacity: 9 mm Max. bending capacity: 7 mm Diameter cylinder: 775 mm Material with flow strength: 260 N/mm² Roller diameter: 155 mm Max. sheet width: 1500 mm Dimensions (LxWxH), approx.: 3200 x 1500 x 1200 mm Weight, approx.: 2500 kg
Technical data of the Faccin HAV 3162 hydraulic plate calender used: Upper roller diameter: 620 mm Diameter of side rollers: 550 mm Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg
Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg
-Plate rolling machine rubber urethane pinch roll 1-one-pass rolling with pre-bending -Plate sheet width max. 3000 mm -Plate thickness 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. -Console electric manual/automatic work sequence with digital readout. - EQUIPMENT INSTALLED WITH THE MACHINE -Vacuum cups lifter plate width 3000 mm -Automatic feed pusher plate sheet loader into the rolls- -Side support hydraulic operated with conveyor belts motorized cradle system, all parts rubber coated to protect the plate surface from scratches.
Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.
Sheet thickness: 6,00 mm Bending length: 2050 mm Number of rolls: 3 Make Faccin 6 mm Type Asi 2015 Year 2005 3 roll plate bender blechwalze plaatwals wals Sheet thickness (mm) Rolling = 6 mm Bending length (mm) Length = 2.050 Number of rolls Pre = 4 mm Top roll 150 mm Digital readout pos. roll Hardned rolls
Sheet thickness: 120,00 mm Bending length: 3050 mm Number of rolls: 4 Make Faccin 120 mm Type 4 HEL 3186 Year 2011 Faccin 4 hel 3186 120 mm blechwalze platebender Sheet thickness (mm)T = 120 mm Bending length (mm)L = 3.050 mm Number of rolls 4 rollerTop roll = 860 mm Power = 225 Ps Weight = 160.000 Kg NC Siemens Simatec Top support Side support Conical bending New Euro 1.200.000
Sheet thickness: 13,00 mm Bending length: 2000 mm Number of rolls: 3 Make Faccin 13 mm Type DP3 - 2021 Year 2008 3 roll hydraulic plate bender Sheet thickness (mm) Rolling = 13 mm Bending length (mm) Pre bend = 9 mm Number of rolls Length = 2.000 Top roll = 215 Lower roll = 195 Power = 10 Hp Digital read out hydraulic drop end
Sheet thickness: 48,00 mm Bending length: 3100 mm Number of rolls: 3 Make Faccin 48 mm Type 3 HEL Year 1998 Hydraulic 3 roll plate bender Sheet thickness (mm)Bend = 48 mm Bending length (mm)Pre = 40 mm Number of rolls Length = 3.100 Top roll = 500 / 480 side Power 80 Ps Hardned rolls
Manufacturer: Faccin Model: 4 HEL 2128 Type of Machine: Round Bending Machine Condition: used Find more here - / Contact us at -
roll surface width: 3000 mm length: 5000 mm width: 2000 mm height: 2100 mm side roll diameter: 300 mm material strength at pre-bending: 18 mm : 3 Bending speed: 0-5 °/sec output: 20 kw weight of the machine ca.: ca. 13000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2050 mm plate thickness: 6,00 mm pre-bending: band thickness stainless steel: 4,00 mm total power requirement: kW weight of the machine ca.: 8,00 t dimensions of the machine ca.: 3,85 x 1,10 x 1,25 m • Mobile control panel • Top roller 185 mm • Lower roller 170 mm • Conical bending device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheet thickness: 6,00 mm Bending length: 2050 mm Number of rolls: 3 Make Faccin 6 mm Type Asi 2015 Year 2005 3 roll plate bender blechwalze plaatwals wals Sheet thickness (mm) Rolling = 6 mm Bending length (mm) Length = 2.050 Number of rolls Pre = 4 mm Top roll 150 mm Digital readout pos. roll Hardned rolls
Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4 SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical Hydraulic 3 or 4 roll 4 roll Maximum sheet thickness 40 mm Bending length 3500 mm Max. Rolling capacity Ø 2.500 40 mm Max. Prebending capacity Ø 2.500 35 mm Top Roll Ø 500 mm Bottom Roll Ø400 mm Side Rolls Ø 400 mm Power 55 kW
Sheet thickness: 140,00 mm Bending length: 3050 mm Number of rolls: 3 SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical Hydraulic 3 or 4 roll3 roller Maximum sheet thickness 140 mm Bending length 3050 mm Max. Rolling capacity Ø 2.500 140 mm Max. Prebending capacity Ø 2.500 90 mm Top Roll Ø 900 mm Side Rolls Ø 820 mm Power 162 kW
Sheet thickness: 10,00 mm Bending length: 8000 mm Number of rolls: 4 CNC Brand: _Unknown / Other CNC Model: PC Windows SPECIFICATIONS Controll Faccin PC WINDOWS Hydraulic / Mechanical Hydraulic 3 or 4 roll 4 roll Maximum sheet thickness 10 mm Bending length 8000 mm Max. Rolling capacity Ø 2.500 10 mm Max. Prebending capacity Ø 2.500 6 mm Top Roll Ø 320 mm Bottom Roll Ø 440 mm Side Rolls Ø 340 mm Power 37 kW
Material thickness: 12 mm Throat: 4000 mm SPECIFICATIONS Controll Conventionel Maximum sheet thickness Steel 10 or 12 mm Max. Bank ø in the gap 4000 mm Power 37 kW DIMENSIONS Length 4000 mm Width 1200 mm Height 2400 mm Faccin Flanging machine dishing press, dished ends production, shipyard press,
Sheet thickness: 48,00 mm Bending length: 3100 mm Number of rolls: 3 Make Faccin 48 mm Type 3 HEL Year 1998 Hydraulic 3 roll plate bender Sheet thickness (mm)Bend = 48 mm Bending length (mm)Pre = 40 mm Number of rolls Length = 3.100 Top roll = 500 / 480 side Power 80 Ps Hardned rolls
Sheet thickness: 4,0 mm Bending length: 2000 mm Number of rolls: 3 Make Faccin 4 mm Type ASI / M Year 1996 Asymetric 3 roller Sheet thickness (mm)Thick = 4 mm Bending length (mm)Length = 2.000 Number of rolls 3 Digital read out Foot switch L & R Mot. side roll CE Safety
Sheet thickness: 120,00 mm Bending length: 3050 mm Number of rolls: 4 Make Faccin 120 mm Type 4 HEL 3186 Year 2011 Faccin 4 hel 3186 120 mm blechwalze platebender Sheet thickness (mm)T = 120 mm Bending length (mm)L = 3.050 mm Number of rolls 4 rollerTop roll = 860 mm Power = 225 Ps Weight = 160.000 Kg NC Siemens Simatec Top support Side support Conical bending New Euro 1.200.000
sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
