Model
(Manufacturer: FEIN)
Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.
Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)
Key data: 150 mm, 2000 mm
No-load speed: 3000 1/min Nominal consumption: 4 kW Belt dimensions: 150 x 2000 mm Voltage: 3 x 400/440V 50/60Hz Weight: 93 kg No-load speed at 50Hz: 3000 1/min Many replacement abrasive belts P60 and P40
specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg
Fine jigsaw for pipes up to diameter. 440mm Fine electronic with ASTXE 649 Order Nr. 723408 (l. when buying new catalog) Rated power: 750 Watt 240 volt 50 Hz Power output: 480 Watts Speed: 100-350 / min stepless electronic speed adjusting setting for optimal Schnittgesch. Stroke length: 60 mm Weight: 6.2 kg maximum material thickness: pipes up to 440 mm Profiles-W x H: 290 x 550 mm Accessories: Clamping for tubes up to 440 mm Tool chest, various saw blades good used condition in the camp to test
While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting height: 2000 mm weight max.: 22 - 32 kg. weight: 13,5 kg Description : - Safe hanging of device and supply line - in the weightless state. - constant traction - Tear-proof steel cable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight balancer make FINEBest. -No: 90801030004Load capacity: 13.5 - 17 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Weight balancer make FINEBest. -No: 90801030004Load capacity: 13.5 - 17 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
width of the strips: 150 mm band length: 2.000 mm revolutions per minute: 3.000 U/min engine output: 4,0 kW weight: 93 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75,0 mm band length: 2.000 mm band speed: 30 m/sec grinding width: 75 x 430 mm engine output: 3,0 kW weight: 75 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting height: 2000 mm weight max.: 22 - 32 kg. weight: 13,5 kg Description : - Safe hanging of device and supply line - in the weightless state. - constant traction - Tear-proof steel cable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
