67 FLOTT used machine for sale

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

Specifications: - Sanding belt dimensions 2000 x 150 mm - Surface grinding opening 530 x 150 mm - Sanding belt speed 34 m/s - Contact washer B 150 / D 200 - Drive pulley B 150 / D 200 - Drive 400 V / 2880 rpm / 4 kW - Working height adjustable 475 - 1240 mm - Space requirement approx. W 580 x H approx. 1250 x D 1000 mm - Weight approx. 110 kg

Specifications: Lens dimensions: 175 x 25 x 32 mm Motor power: 0.6 kW Dimensions (WxDxH), approx.: 410 x 300 x 260 mm Weight, approx.: 16 kg

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

The machine is in perfect condition.

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

Double bench grinder, double grinder 400 volt connection

- Flow forming machine FLOTT SB 20 FB plus - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - EMERGENCY STOP push button - Thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug Flow molds for the production of threads in thin-walled metallic materials, Flow forming capacity at 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with rack and pinion - Spindle speeds infinitely variable (1/min): 20 – 4,000 - Dimensions (mm): 355 x 705 x 1825 For more TECHNICAL DATA, please refer to the product sheet! 3-year warranty for single-shift operation Deliv ...

Spindle mount MK 3 Drilling capacity in steel: 23 mm

Key data: 13 mm

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Brush diameter: approx. 250mm Brush width: approx. 60mm Speed: approx. 2800/1400 rpm L x W x H: approx. 500x560x1250mm Weight: approx. 85kg Accessories  Complete documentation

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

Spindle mount MK 3 Drilling capacity in steel: 23 mm Defective speed display

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Grinding wheel bore approx. 32 mm - Disc speed approx. 2500 rpm - Drive 400 V / 1.8 kW - Working height approx. 980 mm - Machine stand with motorized extraction MA 600 - Drive extraction 400 V / 1.5 kW - Space requirement approx. W 550 x H 1100 x D 650 mm - Weight approx. 80 kg

High-quality construction The drive roller is convex (this automatically centers the abrasive belt in the middle of the roller), fully vulcanized for longest service life and best running smoothness, Tool-free and therefore quick, uncomplicated change of the sanding belt, infinitely variable height adjustment for optimal setup of the belt sander to the user, freely adjustable metal stop for optimal and safe guidance of workpieces when using the large surface grinding area, Optimized belt speed in terms of design, so that burning of the workpiece during machining can be excluded as far as possible, Motor protection switch with CEE collar plug incl. phase changer, 5-year warranty on the engine Strip length 2000 mm Belt width 75 mm Surface grinding range 600 mm Belt speed 30 m/s Colour RAL 9007 Three-phase motor 400 V 3.0/3.75 kW Machine dimensions (W x D x H) 1100 x 550 x  ...

Key data: 23 mm, 300 mm, 150 mm

- Table size 300 x 410 mm - Spindle mount MK 2 - motorized coolant pump - Machine vice - Assortment of drill bits

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...

Specifications: - Drilling performance - in steel 6 mm - in aluminium 10 mm - Drilling depth 60 mm - Projection spindle / column 200 mm - Drilling spindle speeds 450 - 4500 rpm - Drive 380 V / 0.6 kW - Height-adjustable drilling unit with hand crank - Table dimensions 280 x 280 mm - min. / max. distance spindle table 20 / 210 mm - Drilling unit can be swivelled laterally left + right - Space requirement approx. W 280 x H 750 x D 600 mm - Weight approx. 180 kg - with quick-action chuck 1 - 6 mm

Specifications: Tool holder: MK 3 Drilling capacity: 30 mm Speed range, infinitely variable: 125 - 4000 min-1 Spindle stroke: 120 mm Table size: 420 x 340 mm Projection: 280 mm Column diameter: 110 mm Motor power: 0.9 / 1.45 kW Connection: 400 V Dimensions (WxDxH), approx.: 540 x 830 x 1890 mm Equipment: - Infinitely variable speed adjustment - R-L barrel - Emergency stop push button - Drilling depth stop -Chuck

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

offer 22054 Specifications: - Drilling capacity - in steel 15 mm - - in aluminium 18 mm - Drilling spindle holder MK 2 - Drilling depth 70 mm - Projection spindle / column 180 mm - Drilling spindle speeds 80 - 4000 rpm - Drive 400 V 0.45 / 0.75 kW - height-adjustable drilling table 280 x 240 mm - Distance drilling spindle / table approx. 360 mm - Distance drilling spindle / base plate approx. 410 mm - Space requirement approx. W 280 x H 1700 x D 600 mm - Weight approx. 85 kg - with : - Quick-change drill chuck 1 - 13 mm - Machine vice - div. Gebr. HSS drill 5 - 15 mm

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Continuous/normal drilling capacity 18/20 mm Threading capacity M12 (depending on pitch) Lockers MK II Drilling depth 100 mm Projection 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed indicator: Digital Drilling depth indicator: Digital Drilling depth stop: quickly adjustable stop ring Manual drill feed Table height adjustment with rack Motor three-phase current – frequency-controlled, 230 V, 0.75 kW Spindle speeds infinitely variable 30 – 3000 1/min Table work surface: 155 - 415 mm Footwork: 155 – 550 mm Machine dimensions: 355 x 705 x 1065 mm Weight: 170 kg Optional accessories: Drill package 3: with [felix] 2.0 100 Machine vice Flott [felix] 100, Quick-change drill chuck 3-16 mm (accuracy 0.17 mm), Kegeldorn MK 2 B18 and reducing sleeve MK 2 to Mk 1 � ...

Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable by hand lever 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed by head pressure Specifications: Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed at the push of a button Feed speeds: 0.1 - 0.16 - 0.25 mm/revolution Thread cutting device coolant equipment, Drill table lighting Operating instructions Connection cable 16 A

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...