Refer to code 1182 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1176 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Francis Shaw Three Roll Calendar Roll dims 12” x 6” Fixed centre roll Adjustable top & bottom rolls Variable speed Complete with motor and starter
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
17” (430mm) wide x 9” (230mm) diam. Francis Shaw Two Roll Mill Right angle drive No rotary joints One-piece fabricated bedplate Brooke motor 20HP Scraper blade front Bull wheel drive Holroyd Gearbox Caliper brake Control Panel Dims: 2.2m wide x 1.7m deep x 1.7m high
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
The machine is designed for steam heating up to 10 bar (140°C) or water cooling and has a capacity of about 3.45 kG with a specific gravity of 1.0, i.e. working volume about 3.45 l. Flow drive of 60 hp, suitable for impeller speeds of 88 to 8 rpm, mixing chamber is steel housing, inner surfaces chrome-plated
Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993
Refer to code 1119 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1118 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1003 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1002 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased as is without warranty, or completely rebuilt and guaranteed as new machine.
1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.
Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel
1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed. All other components checked, serviced or replaced during re-assembly. The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.
1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).
1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.
Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.
Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel
Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.
1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.
used
1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.
used
1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.
Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.
