Tool milling machine - DECKEL FP 3L / 3-axis Heidenhain digital display -Travel X/Y/Z 800x300x400mm (y-axis can be moved by 200mm) -Speed range 40 - 2000 rpm -Feed and rapid traverses in all three axes -Feed rate 10-500 mm/min -Rapid traverses1500 mm/min -Horizontal / vertical milling device SK40 - extendable -Rigid angle table (clamping surface 1000x400mm) -Drive power 2.2 KW -Three axis Heidenhain digital display Lrjbr Tov Sdfvo I Ewyei -Chip tray -Good general condition -Documentation Dimensions: LxWxH 1.8x1.7x1.7 meters / Weight 1900Kg
355E S20x2 Collet Set 1.0-17.5 0.5 Rising for Cover FP1 FP2 Top Condition 34-piece collet set for Friedrich Deckel FP1, FP2, FP3, 1.0 to 17.5 in 0.5mm steps. Also common for the tool grinding machines of Deckel S0, S0E, S1, S11 Every single collet is in great condition and very clean. This sentence probably hasn't been used very much, it's so good it looks. Old good quality, Made in Germany Weight approx. 5.8 kg. Includes wooden breadboard You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 94 F1144 (internal article number)
Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Key data: 250 mm, 150 mm, 340 mm
- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg
Milling tool Collets End milling Cutter Roller head milling cutter Grinder 20.000€NP Tools for milling machines including cabinet are offered. Among other things: Parallel bars Two-knife trimmer Three-knife trimmers Four-knife trimmers Roller head milling cutters Collets Spacer rings Cutter mandrels Among others suitable for this milling machine: Friedrich Deckel FP 2 LB milling machine
Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer. ...
X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible.
Max. rotational speed: 2000/min, with instruction manual.
