HARDINGE BRIDGEPORT DT 480 P3 Stock number 8075228 X-axis travel 18.90 Y-axis travel 15.75 Z-axis travel 16.93 Spindle speed 10,000 RPM Spindle taper BT 30 Tool magazine capacity 20 ATC Control Fanuc Additional axis 4th Axis Ready Coolant Standard Coolant System
Key data: 500 mm, 540 mm
Machine Details Stock-No. 1105-03747 Type of machine CNC Lathe Make HARDINGE Type GS 200 MSY Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EXW -free on truck Technical details turning diameter 500 mm turning length 540 mm control FANUC 18 TB Greates Pass Round Over Bed 380 mm centre distance 600 mm X-Travel Plan Top 210/ mm Z-Travel longitudinal 520 mm Spindle Bore 45 mm turning speeds 3500 rpm total power requirement 21 kVA weight of the machine approx. 5 t Additional information equipment: CNC Fanuc 18 TB with 1 chuck + SUP SPINDLE 1 star turret with 12 tool stations vdi 40 c axis + live tools + Y AXIS LOT OFF TOOLS BAR FEEDER LNS QUICK LOAD SERVO Coolant Basin, Measuring Arm Swarf Conveyor transformer (L:1,0xB:0,46xH:0,86m) machine can be demonstrated under power ...
Hardinge RS65 Year of construction 2008 Control: GE Fanuc 161 Hours: 45918 Will be handed over at the end of the year.
Control System: Fanuc OI-MC Table Working Surface: 29.5 x 20 Table Load Capacity: 1540 LBS Longitudinal Travel (X-Axis): 23.62 Cross Travel (Y-Axis): 20.08 Vertical Travel (Z-Axis): 20.08 Maximum Clearance Table Top to Spindle Nose: 26.1 Rapid Traverse Rate, All Axes: 1181 IPM Tool Storage Capacity: 24 Spindle Horsepower: 17.3 HP Spindle Speeds Range: 0-8000 RPM Spindle Taper: No. 40 CAT (V-Flange) Approximate Machine Dimensions: 118 x 96 Approximate Machine Height: 103 Approximate Machine Weight: 8,500 LBS
Control: Fanuc Oi-TC CNC Control Max Swing Over Bed: 18 Max Turning Diameter: 11.1 Max Turning Length: 15 Spindle Speeds: 1-6000 RPM Max Spindle Drive: 17.4 HP Spindle Nose: A2-5 Max Bar Capacity: 1.77 Turret Capacity: 12 Stations Turret Index Time: 0.73 Seconds (Adjacent Station) Turret Travels (X,Z): 9 X / 16 Z Rapid Traverse Rate (X/Z): 1,181 IPM Tailstock Quill Diameter / Taper: MT No. 4
High-precision lathe Hardinge HLV-H EM Wheelbase: 457mm Tip Height: 139mm Spindle bore: 31mm Spindle speeds: 125-3000 Metric scale graduation Threading metric and inch Tailstock with MK2 5C Spindle Nose Includes set of 5C collets Including new steel lining Multifix size A with 5 tool holders New DRO with 0.001mm increments This machine is cleaned and serviced
Inv. Num. : 7604 Type: LC 380 Produzent: Hardinge Erzeugt: Parametern: Steuerungssystem: FANUC Series 21-T Betriebsstunden: 95841 h Maximaler Drehdurchmesser über Bett: 380 mm
Key data: 300 mm, 500 mm, 4000 1/min
Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER
Key data: 300 mm, 550 mm
Stock-No. 1105-03990 Type of machine CNC Turning- and Milling Center Make HARDINGE Type QUEST 6/42 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 200 mm turning length 555 mm Control Fanuc 16 IT Spindle Bore Diameter 65 / 42 mm number of controlled axis 8 turning speed range 25 - 6000 rpm power requirement 18+18 kW rapid speed 20/30 m/min number of tapers in turret head 10+10 number of driven tools in turret 10+10 Spindle speed of driven tools 40 - 4200 rpm Spindelpower on driven tool 7 kW tail stock sub-spindle Additional information CNC-Lathe with driven tools,c axis , sub-spindle - Chipconveyor - - some toolholders live and fixed vdi 30 - Programmable Partscatcher CNC Fanuc 16 IT
Key data: 284 mm, 406 mm, 6000 1/min
- Turning diameter: 284 mm - Turning length: 406 mm - X: 218 mm - Z: 406 mm - Speed range: 6000 rpm - Spindle clearance: 45 mm - Revolver: 12-speed - Driven tools: yes - Control: Siemens 810 D - electr. Handwheel: yes - Chip conveyor: yes - Total power: 25 kW - Machine weight: 2.694 kg - Space requirement (W x D x H): 3.0 x 1.55 x 1.8 m Details Spindle restocked in 2024, Siemens Options: Shopturn, Pheriperie Switch, ShopTurn Work Step Programming, Transmit & Sheath Surface Transformation Accessories Documentation, no other accessories
Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK
Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER
Machine Details Stock number 1105-03800 Machine type machining center - vertical Make HARDINGE-BRIDGEPORT Type vmc 1000 Year of construction 2007 Control type CNC Control FANUC OIMC Storage location FRANCE Country of origin UK Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 1000 mm y-travel 510 mm z-travel 510 mm Control FANUC OIMC Table clamping surface 1150 x 490 mm Rapid traverse 30/30/30 m/min Speed range 10000 rpm Drive power - milling spindle 13 kW Number of tools in the magazine 20 BT 40 pieces Information 3-axis CNC machining center Accessories: CNC FANUC OIMC - Synchronized tapping - flat guides in all three Axes RS-232 interface SPAENEFFORDERUNGE
Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER
This HARDINGE EMAG VL 5 was manufactured in 2001. It features a Fanuc Series 21i-T control, a chuck diameter of 260 mm, and a maximum turning diameter of 220 mm. The spindle can reach speeds up to 4,500 rpm, and it includes a 12-piece automatic tool changer. Ideal for precise vertical turning operations. Contact us for more information.
X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 59,861h. With automation FMB Unirobot MH5LS-SP, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, Liqui gravity filter UR1020 with clean tank and other accessories. On-site inspection is possible.
X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 14,841h. With FMB Unirobot GP7-5Pkhs automation system, Jäger HF spindle grinding spindle, MicroCentric 4-410-3-QC chuck, MARPOSS measuring system with automated dimensional compensation, S400 oil mist filter, Knoll KF110/500 belt filter, 320 S1 hinged belt conveyor and other accessories. On-site inspection is possible.
X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible.
Max. swing diameter over bed: 540mm, max. turning diameter: 240mm, max. machining length: 330mm, traverse path: X/Y: 135mm/350, spindle bore: 40mm, speed: 4400rpm. Tool positions: 12, max. tool size square/round: 19mm/31mm, chuck size: 152mm, traversing speed X/Z: 12/16 m/min. Dimensions X/Y/: approx. 2200mm/1700mm/1700mm, weight: approx. 3600kg, control: GE Fanuc 18T.
Table dimensions X/Y: 1370mm/660mm, travel X/Y/Z: 1250mm/660mm/635mm, speed: 8000rpm, spindle mount: BT40, tool positions: 32, spindle-table distance: 790mm, control: Siemens 810 T. Documentation available. On-site inspection is possible.
This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.
