Key data: 330 mm, 1000 mm, 330 mm
Turning length: 1,000 mm Turning diameter: 330 mm above bed 160 mm over cross slide Spindle Passage: 52 mm Spindle speeds: 70 - 2,000 rpm Equipped with: - 1x fixed bezel, 1x rotating bezel - Zahrade Theorem - Clamping pallet - Cheek chuck protection - Coolant device Country of origin: Netherlands Machine LxWxH: 1,800 x 650 x 1,400 mm Machine weight: 750 kg
Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg
Key data: 25 mm, 225 mm, 150 mm
Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg
capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 250 mm capacity 90 degrees: round: 70 mm capacity 90 degrees: square: 65 mm turning speeds: 52 / 104 U/min total power requirement: kW weight of the machine ca.: 0,13 t dimensions of the machine ca.: 800 x 600 x 1500 m Manual cold circular saw with: - Mitre 45°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/min total power requirement: 3 kW weight of the machine ca.: 0,084 t dimensions of the machine ca.: 1x0,5x1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/min total power requirement: 3 kW weight of the machine ca.: 0,11 t dimensions of the machine ca.: 1x0,5x1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thickness of sanding paper: 1,3 mm Width of sanding paper: 41 mm Length of sanding paper: 6280 mm Sharpening pitch: 6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate length: 1550 mm plate thickness: 3,5 mm number of rolls: 3 roll diameter: 120 mm total power requirement: 2,2 kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 2,2 x 1,5 x 1,6 m Electrically operated round roller via foot lever, Sturdy, welded construction stand, Rear roller adjustable for conical bending, Rollers are hardened, Top roller can be swivelled to remove the workpiece. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 250 mm capacity 90 degrees: round: 70 mm capacity 90 degrees: square: 65 mm turning speeds: 52 / 104 U/min total power requirement: kW weight of the machine ca.: 0,13 t dimensions of the machine ca.: 800 x 600 x 1500 m Manual cold circular saw with: - Mitre 45°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: 810 mm cutting capacity - flat: 480 x 850 / 45° mm cutting capacity - round: 480 / 45° mm speed: 20 - 100 m/min sawing motor: 4 kW total power requirement: 6 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 3000 x 1200 x 2350 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 2020 mm plate thickness: 1,5 mm stroke of milling spindle: 100 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 1050 kg dimensions of the machine ca.: 2700 x 900 x 1370 mm Heavy duty angle bending machine. The upper blade is segmented and the segments can be taken out. The work piece is clamped through foot control, which leaves both hands free. The machine is equipped with a cylinder and adjustable lower blade, which makes bending sheet metal very easy. European design. upper blade segmented cylinders on both sides foot pedal height can be set very accurately lower blade adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 2520 mm plate thickness: 1 mm stroke of milling spindle: 100 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 1310 kg dimensions of the machine ca.: 3200 x 900 x 1370 mm Heavy duty angle bending machine. The upper blade is segmented and the segments can be taken out. The work piece is clamped through foot control, which leaves both hands free. The machine is equipped with a cylinder and adjustable lower blade, which makes bending sheet metal very easy. European design. upper blade segmented cylinders on both sides foot pedal height can be set very accurately lower blade adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rotary table dia.: 200 mm max. dia. of grinding wheel: 200 mm with manual ongoing: - 0 no. of working stations: 2 Stück grinding wheel width: 25 mm bore: 20 mm total power requirement: 0,45 kW weight of the machine ca.: 54 t dimensions of the machine ca.: 500 x 330 x 300 m Solid grinding machine of absolute industrial quality. Powerful motor, the perfect balancing ensures that the machine runs with little vibration and noise. Heavy-duty workpiece support and vision panels. Version with steel brush and motorless chip collection system. Equipped with high-quality spark protection. Characteristics: Emergency stop with idle circuit adjustable handrail trowel with eye protection with suction nozzle with chip trap with water basin. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 230 mm saw band length: 2730 x 27 mm cutting width: 0,9 mm capacity 90 degrees: flat: 320 x 130 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: flat: 230 x 100 mm cutting speed: 35 - 70 m/min cutting angle: + - 45 ° hydraulic motor: 0,37 kW coolant pump: 0,12 kW sawing motor: 1,5 kW total power requirement: 2 kW weight of the machine ca.: 440 kg dimensions of the machine ca.: 1,4 x 0,9 x 1,3 m Setting of the saw pressure by hydr. cylinder Cooling device, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/min total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 2 mm distance between columns: 2030 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 1,22 t dimensions of the machine ca.: 2,5 x 1,0 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm roll diameter: 148 mm : 13,6-27,2 Upm engine output: 2,2 kW turning speed range - power take off spindle: 13 U/min dimensions of the machine ca.: 750 x 1450 x 800 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 200 mm no. of working stations: 1 Stück grinding wheel width: 25 mm bore: 20 mm grinding band dimension: 100 x 1000 mm turning speeds: 2850 U/min saw band speed: 15 m/s total power requirement: 0,75 kW weight of the machine ca.: 31 kg dimensions of the machine ca.: 600 x 460 x 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4,5 mm roll diameter: 120 mm : 1300 engine output: 2,2 kW weight of the machine ca.: 660 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers heavy duty welded steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M2 - M 12 mm : 9,5 mm turning speed range - thread cutting: 250 U/min collet holder: 6 / M2 - M12 Air consumption: 0,4 l/min. turning speeds: 250 U/min weight: 4 kg Pneumatic driven tapping pistol for quick operation on spot. Professional excecution. Standard collets do fit. Features: pneumatic drive system wrench The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 400 U/min working range: 500 - 1600 mm thread: M3 - M 12 collets: 6 weight of the machine ca.: 20 kg The AT II series pneumatic tapping machines have a radius of up to 1600 mm. The construction of the machines enables you to reach the workpiece quickly. Easily mounted on a work surface. For professional use. Accessories: M3-M12 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1300 mm plate thickness: 1,5 mm roll diameter: 75 mm min. dia.: 85 mm engine output: 0,75 kW weight of the machine ca.: 420 kg Electric roller. Foot control. Heavy duty welded robust construction. Back roller can be adjusted for conical bending. Upper roller can be turned away for easy removal of the work piece. Comfortable operation and both hands free. For workshops and handicraft. with foot pedal (forward, backward) made of cast iron back roller adjustable by hand wheel lower roller adjustable by handle, eccentric safety cord with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 1500 mm plate thickness: 1,5 mm bending angle max.: 135 ° weight of the machine ca.: 360 kg dimensions of the machine ca.: 1700 x 710x 1270 mm Heavy duty angle bending machine. The upper blade is segmented and the segments can be taken out. The work piece is clamped through foot control, which leaves both hands free. The machine is equipped with a cylinder and adjustable lower blade, which makes bending sheet metal very easy. European design. upper blade segmented cylinders on both sides foot pedal height can be set very accurately lower blade adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 1050 mm plate thickness: 1,2 mm distance between columns: 1060 mm bending angle max.: 135 ° weight of the machine ca.: 133 kg dimensions of the machine ca.: 1,2 x 0,80 x 1,0 m Light weight angle bending machine, for simple but effective bending work. Due to its price this has proved a popular machine for workshops and DIY. operation with 1 hand adjustable to material thickness adjustable lower blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
