Year: 2010 - technically efficient, ready to work – after full service - split heads - hydro-pneumatic - support arms
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3800 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 2200 operating hours
Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with detent points Max. notching depth: 110 mm Max. profile height: 190 mm Max. cutter pack height: 95 mm Pneumatic material tensioners Spraying device
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and degree display Ctfw3Ysn Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
Universal notching sawing machine Offer 24237 Specifications: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - Horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° -Digital - Pneumatic material vises - Pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg
Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
- technically efficient, ready to work - after full service - pneumatic drive - head movement - lowered resistance unit
Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg
Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication
Key data: 300 mm
Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg
Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout
Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.
Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos
Manufacturer: Pressta-Eisele Type: Norma VIS 400 TU/4 Year of construction: 1994 Speed: 2890 rpm
Cutter diameter: 250 mm Max. notch width: 250 mm Max. notching depth: 85 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Manual feed Weight: approx. 150 kg
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
- technically efficient, ready to work - after full service - profile supports - lowered thrust unit
Cutter diameter: 250 mm notching width: 400 mm notching depth: 85 mm profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Hydropneumatic feed via foot switch Weight: approx. 350 kg
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...
Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine ...
Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...
saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
