Pure steam generators Manufacturer Stilmas Type PSG 50 /DTS Clean steam volume 0-max. 50 kg/h at pure steam pressure 3 bar or pure steam volume 0-max. 100 kg/h at pure steam pressure 1 bar The process guarantees the production of dry, sterile, pyrogen-free, pure steam that is free of particles or metal bions.
Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available
Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available
Reverse osmosis station. Manufacturer: Stilmas. Year of production 1997. The device is used to produce purified water using the reverse osmosis method. It consists of three parts: a pre-treatment system, a reverse osmosis system and a purified water storage and distribution system. Each part is connected in series with the other parts, which means that the reverse osmosis system cannot operate if the pre-treatment system does not supply it with water, and the cycle cannot operate if the reverse osmosis system does not supply purified water. Water to supply the installation is taken from the municipal water supply network. The efficiency of the device is 0.7 m3/h and the conductivity of the purified water obtained is < 4.3µS/cm2. PRELIMINARY CLEANING • 20 µm filter • softening columns (A 64A and A 64B) • Na2S2O3 (sodium thiosulfate) dosing system • NaOH (sodium hydroxi ...
Ultrapure steam generators Manufacturer Stilmas Type PSG 50 /DTS Ultrapure steam quantity 0-max. 50 kg/h at ultrapure steam pressure 3 bar or ultrapure steam quantity 0-max. 100 kg/h at ultrapure steam pressure 1 bar
STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...
The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...
A Stilmas distillation plant for the production of water for injection (WFI) is available. Production capacity 25°C/85°C: 500l/h / 1000l/h, max. temperature: 144°C. Documentation available. On-site inspection is possible.
Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.
