We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is mounted on the side Manufacturer: NETSTAL Type: SYNERGY 1200-460 - 60 Year of Make: 2006 Clamping force: 120 tons Handlebar spacing: 460 x 460 mm Screw diameter 1: 35 mm Moulded part weight 1: 123 g/hp Screw diameter 2: 20 mm Moulded part weight 2: 31 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side
1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Type: SYNERGY 1750-900-230 Year of Make: 2016 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot Wittmann, Year of manufacture: 2016
1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Manufacturer: NETSTAL Type: SYNERGY 1750-900-230 Year of Make: 2012 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side
1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side, with Robots Manufacturer: NETSTAL Type: SYNERGY 2400-900 - 230 Year of Make: 2000 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 32 mm Moulded part weight 2: 99 g/hp Equipment: Robot, manufacturer SEPRO Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot SEPRO
1.0 PCS Gebr. Two Component Injection Molding Machine second aggregate is attached to the side. Manufacturer: NETSTAL Type: SYNERGY1700 - 110 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 70 mm Moulded part weight 1: 916 g/hp Screw diameter 2: 28 mm Moulded part weight 2: 59 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side
1.0 pcs. Injection moulding machine Manufacturer: NETSTAL Type: ELION800-270PM Year of Make: 2008 Clamping force: 80 tons Spar spacing 410 x 410 mm Installation height min./max.: 500 mm Opening travel: 350 mm Screws DN: 40 mm Max. displacement: 160.8 cm³ Moulded part weight in hp: 154.3 g Core pulls 2 pieces
1.0 pcs. Injection moulding machine Manufacturer: NETSTAL Type: ELION1750-840PM Year of Make: 2008 Clamping force: 175 tons Spar spacing 510 x 510 mm Installation height min. / max. 500 - 800 mm Opening travel: 450 mm Screws DN: 55 mm Max. displacement: 457.6 cm³ Moulded part weight in hp: 455.8 g Equipment: 2 x Core Pull
1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-900 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 55 mm Moulded part weight: 456 g/hp Equipment: Core slides 2 x DS / 1 x AS Robot WITTMANN
1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-900 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 50 mm Moulded part weight: 377g/hp Equipment: Core slides 2 x DS / 1 x AS Robot WITTMANN
1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-150 Year of Make: 2008 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot SEPRO
1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2009 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot Manufacturer: SEPRO
1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2010 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Interface Robot
Netstal 350 T type EVOS 3500/2900 Année : 2010 ?Modèle : EVOS 3500/2900 ?Tonnage : 350T? Nombre d’heure : 60 000 heures Diamètre vis d'injection : 70 mm Rapport ?L/D : 27 ?Pression injection : 2400 bars? Volume d'injection : 1078 cm3 ?Épaisseur moule (mini/maxi) : 700 - 1150 mm? Passage entre colonne : 730 x 730mm? Dimension des plateaux : 922 x 1086 mm? Poids : 25 000 Kg
Netstal EVOS 3500/2900 - 350T Year: 2010 Model: EVOS 3500/2900 Tonnage: 350T Operating hours: 60,000 h Screw diameter: 70 mm L/D ratio: 27 Injection pressure : 2400 bar Injection volume (max.): 1078 cm³ Mold thickness (min./max.): 700 – 1150 mm Distance between tiebar (H x V): 730 x 730 mm Platen dimensions: 922 x 1086 mm Weight: 25,000 kg
Screw diameter: 70 mm Injectable volume: 1077 cm3 Injection pressure: 2423 bar Passage between columns: 720 x 720 Moulded thickness: minimum: 450mm- max: 750 Opening stroke: 700 mm Number Of Cores :2
Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg
1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.
Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours
Injection moulding machine Netstal synergy 600/110 BJ 2001
Manufacturer: Netstal Model: Elion 1200-530PM Year of Manufacture: 2005 Specifications: - Clamping Force: 120 tons - Screw Diameter: 35 mm - Operating Hours: Not listed - Cycles: 12,028,062 Find more here - / Contact us at -
Manufacturer: Netstal Model: Synergy 3000 Year of Manufacture: 1999 Specifications: - Clamping Force: 300 tons - Screw Diameter: 62 mm - Operating Hours: 75,832 - Cycles: 7,107,214 Find more here - / Contact us at -
This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us.
Operating pressure: 210bar, injection force: 693kN, clamping force: 3500kN, opening stroke: 700mm, mold installation height: 600mm-950mm, power: 118kW, operating hours: 176,533h, cycles: 1,569,030. documentation available. On-site inspection is possible.
Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000
This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.
This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.
This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.
This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information.
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.
Capacity: 0 t (1) horizontal / (2) vertical: 0 Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Clamping force: 150 to Stroke volume: 201 cm3 Ejector stroke: 150 mm Ejector force: 49 kN Pressure on material: 2218 bar Screw diameter: 40 mm from: 20 rpm up to: 300 rpm Mould heating: 20 kW Screw drive: 30 kW Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5700 mm Width: 1650 mm Height: 2220 mm