Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
grinding machines / Wide belt grinding machines
date: 02.06.2026
approved
dealer
item-No.: 162747610
used
approved
Location: pl
Price: 4.024 €

Part number 7976 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 160mm 2 generators: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – in advance: - 2 metal rollers, sliding - pressure - Aggregate - 2 metal sliding rollers - Aggregate - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, slip - pulling tape - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed - working pressure 8-10bar - Extraction port diameter 2x200mm - total power 30kW - overall dimensions l/w/h 2230x2020x2050mm - weight about 3000kg ADVANTAGES – German production – 2 generators – used grinder, very good condition Net price: 16900 PLN Net price: 4024 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

grinding machines / Wide belt grinding machines
date: 07.05.2026
approved
dealer
item-No.: 162746693
used
approved
Location: at

OTT MEGAtronic 11 Paint Wide-belt calibration fine grinding machine 1. Grinding unit calibration roller DM 150 mm 90° Shore 2. Grinding unit with electronically controlled, segmented membrane sanding shoe Working width 1100 mm MEGA - Lacquer sanding package Feed speed infinitely variable 3-15 m/min Motor power 1. Grinding unit 11 kW Motor power 2nd grinding unit 11 kW with 2nd belt speed 4.5 m/sec Other optional accessories VACUUM TABLE VACUUM GENERATOR 3 kW Tape radiation Rigid sanding shoe for solid and frame grinding Machine is WORKSHOP overhauled in TOP - CONDITION from craft business from stock Lieboch

grinding machines / Wide belt grinding machines
date: 01.10.2026
approved
dealer
item-No.: 162744790
New in: 1996 used
approved
Location: sk
Price: 6.500 €

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

gluespreader machines / Edge gluing machines
date: 04.10.2026
approved
dealer
item-No.: 162741362
New in: 2007 used
approved
Location: tr
Price: 15.000 €

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

grinding machines / Wide belt grinding machines
date: 17.02.2025
item-No.: 162720519
used
Location: pl
Price: 8.116 €

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

grinding machines / Wide belt grinding machines
date: 04.01.2025
item-No.: 162723421
New in: 1980 used
Location: de

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

grinding machines / Wide belt grinding machines
date: 26.11.2024
item-No.: 162728968
New in: 1991 used
Location: de
Price: 7.900 €
Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

gluespreader machines / Edge gluing machines
date: 23.05.2023
item-No.: 161381937
New in: 1992 used
Location: de

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

gluespreader machines / Edge gluing machines
date: 13.10.2026
item-No.: 162734219
New in: 1990 used
Location: de
Price: 2.500 €

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

other wood working machines
date: 05.06.2025
item-No.: 162705434
New in: 2005 used
Location: be

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

grinding machines / Wide belt grinding machines
date: 23.06.2025
item-No.: 162713014
New in: 1987 used
Price: 2.900 €

Working width: 1100 mm Number of sanding units: 1 st. Workpiece thickness max.: 150 mm sanding belt measurements: mm Motor roller: 11 kW Motor pad: kW Feed motor: 1,5 kW Feed speed: m/min. Overall size: mm Weight: 2250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

other wood working machines
date: 23.06.2025
item-No.: 162717105
New in: 2008 used
Location: de

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

other wood working machines
date: 23.06.2025
item-No.: 162716367
New in: 2001 used
Location: de

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

veneer machines / Veneering presses
date: 23.04.2024
item-No.: 162683055
New in: 1966 used
Price: 2.000 €

Plate dimensions: 2200x1100 mm Daylight opening: 400 mm Number of daylights: 1 St. Motor output: 12 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses
date: 10.04.2024
item-No.: 162691326
New in: 1996 used
Location: de

Edge thickness: maximum 15mm; Workpiece thickness: from 8mm - 60mm; Workpiece width: minimum 60mm; Glue basin: granules; Cross-cut shears: yes; Milling station 1: flush / chamfer; Inlet ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 7kW; Machine length: 2.8m; Machine width: 1.2m; Weight: 1000kg;

other wood working machines
date: 18.10.2023
item-No.: 161315748
New in: 2005 used
Location: be

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

other wood working machines
date: 25.10.2023
item-No.: 162600237
New in: 1994 used
Location: de

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

other wood working machines
date: 25.10.2023
item-No.: 162600159
New in: 2001 used
Location: de

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

other wood working machines
date: 25.10.2023
item-No.: 162599147
New in: 2008 used
Location: de

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)