Here we offer for sale a brand new Reinhardt electrically heated chamber dryer in its original packaging. Reinhardt Chamber Dryer Vortex 2600 Technical description Vortex 2600 Temperature range: 50 - 250°C Temperature deviation: approx. ± 5K in the inertia state, idle and recirculation mode at 250°C Furnace control: PLC control, type RCC, with touch panel 5.7 Volume approx.: 2,600 litres Interior dimensions: Width: 1,250 mm Height: 1,850 mm Depth: 1,150 mm External dimensions approx.: Case width: 2,000 mm Total width: 2,350 mm Case height: 2,170 mm Total height: 2,700 mm Total depth: 1,570 mm Track dimensions: Track width 990 mm Track width 60 mm Insulation thickness: Side walls, ceiling and doors are insulated with 150 mm insulation material, the floor with 50 mm insulation material. Total connected load: 23 kW of which for: Heating: 22.5 ...
Conveyor belt with pneumatic ejector Length: 2,800 mm Belt width: 170 mm Three-phase motor 0.55 kW Pneumatic straight ejector with 5/2 pneumatic distributor fed by a 24v coil Sold with 3 conveyor belts: Belt width: 300 mm Belt length: 3,100 mm (with presence sensor), 3,200 mm and 5,000 mm Adjustable Foot Three-phase motor Sale in pieces possible
Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
Guillotine shears Manufacturer: Reinhardt Type: RAS 82.12 Year of manufacture: not specified Cutting length: 1,250 mm Sheet thickness: 2.25 mm Weight: 830 kg
Round bending machine 3-roll Manufacturer: Reinhardt Type: RAS 40.10 Year of manufacture: not specified Sheet width: 1,020 mm Sheet thickness: 1.25 mm Weight: 175 kg
Swivel bending machine Manufacturer: Reinhardt Type: RAS 67.20 Year of manufacture: not specified Sheet width: 2,040 mm Sheet thickness: 3.5 mm Weight: 2,900 kg
Guillotine shears Manufacturer: Reinhardt Type: RAS 83.20 Year of manufacture: not specified New control system in 2023 Cutting length: 2,040 mm Back gauge: 750 mm Thickness: Sheet steel: 3 mm Stainless steel: 2 mm Aluminum: 4 mm Weight: 2,050 kg Accessories: Incl. spare blade
Specifications: - Operating temperature adjustable from 80° to 300° - Interior dimensions approx. W 1000 x H 1200 x D 900 mm - mot. Small parts conveyor belt for loading with small parts - Usable space 0.88 m³ - Total steam room 1.99 m³ - Exhaust air volume 85 m³/h - permissible solvent quantity 22 gr./per batch - Door opening W 1000 x H 1100 mm - Opening flap in the door approx. W 750 x H 270 mm - Connected value heating 24 kW - Connection value fan 4.45 kW - Space requirement approx.B 2000 x H 2900 m. Fan x D 1800 mm - Weight approx. 2000 kg - Control settings with or without timer Min / h / day - Timer - controlled temperature preselection - Temperature display - Emergency – Off – Button
Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons
A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.
Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg.
Automatic saw for cutting wood and cutting out defects., Full optimization: Yes, cutting height: Max. 110 mm, saw motor: 5,5 kW
