A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.
Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.
An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.
Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible.
ID3518 Bomag B200 on Iveco truck - Well drill / well drill year/Baujahr 1985 approx. 35,000 km Bomag B200 drilling rig (built in 1985), mounted on an Iveco truck (all-wheel drive), with a 100 mm rotary head and a 120 m cable, drilling depths of up to 245 m (250-300 mm diameter), 2 Caprari pumps (type MEC-100), with approximately 90 m of drill rods (114 mm diameter) Bomag B200 (built in 1985), on truck Iveco (all-wheel drive), rotary head 100 mm passage, rope head 120 m rope, drilled to 245 m depth - 250-300 mm diameter, 2 Caprari pumps (type MEC-100), with approx. 90 m drill pipe (114 mm diameter)
ID3528 Tracto-Technik Grundodrill 15XPT year/Baujahr 2017 approx. 3550 hours/hours 11 t Horizontal directional drilling rig HDD 15 XPT, 118 KW engine power, with approx. 150 m Drill Rod Horizontal directional drilling rig HDD 15 XPT, 118 KW engine power, with approx. 150 m drill pipe
ID3519 ABI TM13/16 year/Baujahr 2013 approx. 6200 hours/hours ABI mobile ram system TM13/16 SL on carrier SR35, vibrator MRZV24 VV (year of construction 2013), drilling gearbox MDBA4000 (year of construction 2017) ABI mobile ram system TM13/16 SL on carrier SR35, vibrator MRZV24 VV (year of construction 2013), drilling gearbox MDBA4000 (year of construction 2017)
Earth drill suitable for 5-10t., Second hand
Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone
ID3495 PTC 10 HFVS year/Baujahr 2020 approx. 580 hours/hours Vibrator unit consisting of: Vibrator PTC10 HFVS, aggregate PTC400 VO Stage IV, collet: Agriplex 90 T (new end of 2024), 30 m hose package, excellent condition Vibrator unit consisting of: PTC10 HFVS vibrator, PTC400 VO Stage IV unit, collet: Agriplex 90 T (new end of 2024), 30 m hosepack, excellent condition
Diamond Core Bit, Core Drill BitHILTIDD-BI 14/280 ( DD-BI14/280 )B10/510574Ø 14 mmDepth: 280 mmused !Dimensions(packaging): 400 x 40 x 40 mm
Diamond Core Bit, Core Drill BitHILTIDD-BI 10/190 ( DD-BI10/190 )B18/512672Ø 10 mmDepth: 190 mmNew !Dimensions(Package): 280 x 40 x 40 mm
Diamond Core Bit, Core Drill BitHILTIDD-BI 25/280 RC ( DD-BI25/280RC )250900 / 8Ø 25 mmDepth: 280 mmNew !Dimensions(Package): 350 x 40 x 40 mm
Hammer drill, drilling machineHILTITE 54 ( TE54 )drilling capacity steel: 13 mmdrilling capacity concrete: 52 mm230 / 480 rpm900 W230 Vwith caseDimensions: 600 x 400 x 140 mm
ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)
ID3334 Rotomax XL GTI – Geothermal Drilling rig year/Baujahr 2020 approx. 7300 hours/hours 12.5 t Drilling rig, double rotary head 36000 Nm for boreholes up to 300 m depth, rubber tracks 450 mm, 6-cylinder diesel engine (205 KW) with particle filter, drill carriage with support plate (drilling pressure max. 4000 Kg, retraction max. 19000 kg, clamping head max. Diameter 219 mm, gear shift and gear swivel device, drill pipe catch clamp 419 mm, cable remote control, 4-gear protective tube drilling gear and 4-gear rod drilling gear, 240 kN shock tongs (80-419 mm diameter), cable winch, lubrication system double head system, trailer coupling Drilling rig, double rotary head 36000 Nm for drilling up to 300 m depth, rubber tracks 450 mm, 6 cylinder diesel engine (205 KW) with particulate filter, drilling rig with support plate (drilling pressure max. 4000 kg, retraction max. 19000 kg ...
ID3353 Drilling rods 160 pieces of drill rods with 76 BOMAG thread – 2 meters 20 pieces of drill rods with 76 BOMAG thread – 3.5 meters 160 drill pipes with 76 BOMAG thread – 2 meters 20 pieces of boring rod with 76 BOMAG thread – 3.5 meters
ID3354 Unimog - 4x4 year/Baujahr 1982 Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and mud drilling), with piston pump with approx. 200 litres per minute for core drilling, with centrifugal pump for well drilling (supplied loose), two-stage power rotary head (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, flush drilling max. 600mm in air-lift or suction flush drilling (additional equipment: drilling diameters up to 290mm are possible in rotary drilling), without casing machine Unimog 4x4, Nordmeyer DSB 1 3/5 (combination drilling rig for dry and flush drilling), with piston pump with approx. 200 l per minute for core drilling, with centrifugal pump for well drilling (loosely enclosed), power rotary head two-stage (450 daN - 175 revolutions/ 225daN - 350 revolutions), drilling diameter dry drilling max. 324mm, fl ...
ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros
ID3334 Rotomax XL GTI – Geothermal Drilling rig year/Baujahr 2020 approx. 7300 hours/hours 12.5 t Drilling rig, double rotary head 36000 Nm for boreholes up to 300 m depth, rubber tracks 450 mm, 6-cylinder diesel engine (205 KW) with particle filter, drill carriage with support plate (drilling pressure max. 4000 Kg, retraction max. 19000 kg, clamping head max. Diameter 219 mm, gear shift and gear swivel device, drill pipe catch clamp 419 mm, cable remote control, 4-gear protective tube drilling gear and 4-gear rod drilling gear, 240 kN shock tongs (80-419 mm diameter), cable winch, lubrication system double head system, trailer coupling Drilling rig, double rotary head 36000 Nm for drilling up to 300 m depth, rubber tracks 450 mm, 6 cylinder diesel engine (205 KW) with particulate filter, drilling rig with support plate (drilling pressure max. 4000 kg, retraction max. 19000 kg ...
ID3316 Unimog 437-40 year/Year of construction 1994 87,600 km Unimog 437-40 with Wirth ECO-0 drilling rig, Ingersoll-Rand 7-41 compressor (4350 hours), all-wheel drive, 324 mm casing rotary table, exchange gearbox, power rotary head, drilling diameter DN178 mm to DN324 mm Unimog 437-40 with Wirth ECO-0 drilling rig, Ingersoll-Rand 7-41 compressor (4350 hours), all-wheel drive, casing turntable 324 mm, exchange gear, power rotary head, drilling diameter DN178 mm to DN324 mm
ID3278 Mercedes Atego 1828 year/Year of construction 2003 6465 hours/hours 27.820 km Nordmeyer DSB 1/5 drilling rig, with centrifugal pump, on Mercedes Atego 1828 Drilling rig Nordmeyer DSB 1/5, with centrifugal pump, on Mercedes Atego 1828
ID3274 Sandvik Ranger 500 with HLX 5 T Hammer approx. 6000 hours/hours Hammer approx. 3000 hours/hours Machine with fire damage, cabs burnt out, otherwise everything is in order Machine with fire damage, driver's cabs burned out, otherwise everything is fine
TOPHAMMER ENGINE - CUMMINS , 260hp,QSB6.7,Tier 4 COUNTRY OF PRODUCTION - South Korea DELIVERY - EXW
ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.
ID3208 Unimog 405/12 year/Year of construction 2000 10360 hours/hours – 71.100 km Unimog with Nordmeyer DSB 2/6 drilling rig, auger pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drilling cable winch 19 kN, power flushing head 7 kNm, crushing device 11 kNm, cable impact device (cable pulling force 30 kN, drilling load 5 kN, stroke 400 mm) Unimog with Nordmeyer DSB 2/6 drilling rig, screw pump, overhauled in 2020, maximum crown load 100 kN, feed 60 kN, drill cable winch 19 kN, power rinsing head 7 kNm, crushing device 11 kNm, rope impact device (rope pulling force 30 kN, drilling load 5 kN, stroke 400 mm)
ID3237 Clamp KR806-3F year/Year of construction 2014 approx. 8480 hours/hours Double head slewing drive with Klemm KH22 and Klemm KD1215, divisible carriage type 202 (carriage can be shortened and 1700mm), Deutz TCD 6.1 L6 (160kW) COM 3B Tier4 i engine with diesel particulate filter, 500 mm track plate width, hydraulic clamping/breaking device type H (from 38-254 mm) Double-head rotary actuator with clamp KH22 and clamp KD1215, separable mount type 202 (mount can be shortened and 1700mm), engine Deutz TCD 6.1 L6 (160kW) COM 3B Tier4 i with diesel particulate filter, chain plate width 500 mm, hydraulic clamping-crushing device type H (from 38-254 mm)
Stable drilling machine for core drilling up to borehole diameters of 1250mm; suitable for reinforced concrete; Including hydraulic power unit HAG-12.10; Including drill bit DN 1200 (length 160 cm) with used segments, DN 1000 (length 145 cm) with worn segments and DN 1000 (length 80 cm) without segments; including 1 set of new diamond segments for drill bit DN 1000 for reinforced concrete
ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive journal and drawing bell, linkage interceptor, centrifugal pump, winch, 4 hydraulic support cylinders, control panel, machine has been completely overhauled (the control blocks have been completely ren ...
ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump
