Manufacturer:
Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories 2 pieces of bandsaw blades Other accessories on request Price and other technical data on request
Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories Pneumatic clamping Saw blade Miter-adjustable back stop Other accessories on request Price and other technical data on request
Key data: 420 mm, 650 mm
Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories Cutting pressure adjustable Adjustable number of strokes Coolant device Footswitch Turntable Other accessories on request Price and other technical data on request
Key data: 200 mm, 450 mm
Article code: 19-03-035 Manufacturer: Kasto Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1600x800x1300mm Weight: approx. 500kg Saw blade dimensions: approx. 450mm Cutting diameter: approx. 200mm Accessories Cutting pressure adjustable Coolant device 9 pieces of saw blades Other accessories on request Price and other technical data on request
Automatic band saw Bauer S260 Year of construction: 1995 Manufacturer: Bauer Germany S/N 69-1120 with additional runway Specifications Cutting diameter 260 mm Saw blade length 3660 x 25x 0.9 mm Cutting width 320 x 240 mm Motor 0.75 kW Cutting range at 90° round 260 mm flat 450 x 240 mm Cutting range at 45° round 230 mm flat 240 x 200 mm Hydr. raising + lowering the saw frame Conventional governance Cutting pressure infinitely variable 0 - 10 m/min Total drive power 400 V / 0.8 kW Coolant device Dimensions: 2010 x 850 x 1110 mm Weight approx. 800 kg
saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 500 mmsaw band length: 5200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.8 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.
Saw blade diameter: 450mm, stroke: 240mm, machine dimensions X/Y/Z: approx. 1000mm/1350mm/1900mm, weight: approx. 1200kg. Cutting range at 90°: round material: 150mm, flat material: 300mm/95mm, square material: 140mm/140mm. Cutting range at 45°: flat material: 210mm/95mm. Including roller conveyor and NC stopper. On-site inspection is possible.
Key data: 350 mm
Used Metal Circular Saw Int. Art. Ref. m3656 Manufacturer Metallkraft Type MKS 350 Year of construction approx. 2004 Motor power 1.4/2.4 kW Speeds 40/80 rpm. Vise span 120 mm Saw blade diameter 350 mm Weight approx. 210 kg Cutting performance: - Tube 90° 90 mm - Tube 45° 80 mm - Round, full 90° 65 mm - Round, full 45° 60 mm - Square 90° 85x85 mm - Square 45° 70x70 mm - Rectangle 90° 120x70 mm - Rectangle 45° 80x70 mm Accessories: - various tools and keys -Coolant pump -Saw blades -Oil -Guide Item location: 59425 Unna The machine can be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimension ...
dimensions of saw-band: 2720x27x0,9 mmcapacity 90 degrees: round: 230 mmcapacity 90 degrees: flat: 300x150 mmcapacity 45 degrees: round: 180 mmcapacity 60 degrees: flat: 200x180 mm: 110 mm: 120x80 mmweight of the machine ca.: 250 kgdimensions of the machine ca.: 1500x900x1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Connected load: 7.2kW, operating pressure: 7bar, saw blade diameter: 500mm, speed: 2800rpm, min. cutting length: 370mm, angular tilt: 45°-90°, machine weight: approx. 800kg. An on-site inspection is possible.
MEP Shark 282 CCS band saw. 3-speed 400V, 2-speed motor runs smoothly. Continuously adjustable speeds from 0 to 72 RPM. Miter sawing possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum sawing capacity, round: 250 mm Maximum sawing capacity, square: 220 mm Maximum clamp opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125x70x190cm Feed track dimensions: 200x53x90cm Includes accessories as shown in the pictures. Freight delivery throughout Europe possible!
Lg.Nr. 24534 Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 185 mm - Cutting range with saw blade diameter 350 mm - at 90° about 100 mm flat up to 170 x 90 mm - at 45° around 95 mm flat 125 x 90 mm - Mitre adjustable - Left up to 60° / Right up to 45° - 2 saw blade speeds 36 / 72 1/min - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 700 x H 1700 x D 800 mm - Weight approx. 450 kg
Key data: 320 mm, 4335 mm
Used band saw Bomar Model: STG 320 DGH Year of construction 2000 Cutting speed adjustable via variator 20-90 m/min. Flexible control panel 90° ∅ 320mm ▨ 320x320mm 510x250mm 470x320mm R 45° ∅ 320mm / ▨ 310x210mm / I-beam 360x180mm R 60° ∅ 220mm / ▨ 220x220mm / I-beam 220x240mm L 45° ∅ 320mm / ▨310x310mm / I-beam 360x180mm L 60° ∅ 170mm / ▨170x170mm / I-beam 240x170mm Total drive power : 2.2 kW Drive power coolant pump : 0.09kW Hydraulic power unit : 0.37kW Machine on casters
Offer 25110 Specifications: - Saw blade dimensions 2950 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 36 to 72 m/min - Max. clamping possibility 325 mm - Mitre adjustable up to 60 ° - Cutting range at 90° around 250 mm - Square 220 mm - flat 280 x 200 mm - Cutting range at 45° around 230 mm - flat 180 x 110 mm - Pneumatic connection 6 bar - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Chip clearing brush - Feed roller conveyor 4000 mm - Discharge roller conveyor with dimension stop 4000 mm - Weight approx. 450 kg - Space requirement approx. W 1400 x H 1650 x D 1350 mm
Offer 25108 Specifications: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° around 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° around 110 mm - flat 135 x 60 mm - Mitre adjustable left + right 45 ° - Tiltable mitre adjustment of the saw head for slather cuts on the left - Pneumatic vises - Discharge – roller conveyor with 2000 mm - Roller conveyor feed 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg
roll diameter: - mmthroat: - mmworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm
Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm
Offer 25180 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 400 x H 950 x D 700 mm - Weight approx. 140 kg - with - bending angle programming 10 programs - With 9 bending angles each - Digital bend angle display + bend angle fine adjustment - E.- Footswitch Ø 26 R 82 - Bending tools Ø 12 R 35 ; Ø 14 R 36 , Ø 20 R 56 - Ø 22 R 67, 28 R 56, Ø 1/2 R67 , Ø 3/4 R xx , Ø 1 R 110,
Offer 25191 Technical data pipe saw: - Cutting range DA 5 - 63 mm - Wall thicknesses 0.5 - 4.5 mm - Saw blade diameter 63 mm - Saw blade spindle speed 180 rpm - Saw blade immersion depth adjustment with scale - Drive 220 V / 500 Watt Technical data tapping machine: - Thread diameter for pipe threads 1/4 - 2 - Universal quick-change cutting heads 1/4 + 3/8 + 1/2 + 3/4 + 1 + 1 1/2 -Right. - Counterclockwise rotation - Automatic lubrication cooling - Space requirement approx. W 1100 x H 1100 x D 700 mm - Weight 100 kg
Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg
Offer 25172 Specifications: - Automatic workflow cutting process, hydr. Raising / lowering the saw frame, mitre adjustment with manual clamping - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed infinitely adjustable 16 - 73 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 305 mm - Square flat 360 x 305 mm - at 45° right about 305 mm - Square 255 x 305 mm - at 30° right square 175 x 305 mm - Hydr. Material Tension - Coolant device - Discharge roller conveyor with dimension stop 4000 mm - Drive 400 V / 3 kW - Space requirement approx. W 1150 x H 1600 x D 1800 mm - Weight approx. 750 kg
Panel saw from OTTO Mayer. For technical information, see nameplate. In operation until June 3, 2025. Because of spontaneous new purchase for self-collection at a great price. Everything worked until the end. Pick-up in 90530 Wendelstein near Nuremberg. Truck for loading can drive almost to the machine. Great Hall
cutting diameter: 230 mmsaw band length: 2750 x 27 x 0,9 mm: 280 x 150 mmcutting speed: 35/70 m/mintotal power requirement: 1,3/1,7 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 3,0 x 2,0 x 1,8 mSemi-automatic band saw- Double miter 45°/60°- Roller conveyor with length stop 2000mm- Roller conveyor feed 3000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg
cutting diameter: 150 mmband length: 300 mmcutting range - flat -: 170 x 150 mmstrokes per minute: 85 / 170 cutting speed: 16 / 32 m/mindimensions of saw-blade: 300 x 30 x 1,5 mmwork height max.: 695 mmtotal power requirement: 1 kWweight of the machine ca.: 0,169 tdimensions of machine L x W x H: 0,77 x 0,70 x 1,33 mAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This MEBA MEBAmat 434 Metal Band Saw was manufactured in 2019. It features a band saw drive power of 7.5 kW and a cutting speed of up to 150 m/min. The machine can handle round material up to Ã434 mm and square material up to 434 Ã 434 mm. Weighing approximately 4000 kg, its designed for robust performance with a hydraulic clamping system. If you are looking to get high quality cutting capabilities consider the MEBA MEBAmat 434 machine we have for sale. Contact us for more information.
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
