8663 offers

subcategories

8663 offers

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

subcategories
(3rd category level)

 

Manufacturer:

AB 1
ABA 3
abb 10
Abus 14
ADL 1
AEG 5
AGIE 20
AMB 2
ATA 1
ATE 1
ATR 1
ATS 4
AXA 2
B 1
B50 1
BAT 1
BKW 1
BLE 1
BLM 3
BMF 2
BOGE 11
other metal working machines
Entry date: 23.05.2025
item-No.: 162711610

used

Pagus Maschinenhandel TOP SELLER
Location: Zschepplin

other metal working machines
Entry date: 23.05.2025
item-No.: 162711616
New in: 1977

used

Pagus Maschinenhandel TOP SELLER
Location: Pagus NL. Jena Deutschland

indexing:Länge =< 1050 mmtable::Teilungslänge =

other metal working machines /Coordinate Measuring Machines
Entry date: 05.05.2025
item-No.: 162705291

used

ZOMA Maschinenhandel TOP SELLER
Location: Eilenburg

Control: / The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

other metal working machines /Clamping Plates
Entry date: 15.03.2023
item-No.: 161046548

used

ZOMA Maschinenhandel TOP SELLER
Location: 04838 Eilenburg Land-de

Length: 5000 mm Width: 2000 mm Height: 400 mm

other metal working machines
Entry date: 08.05.2020
item-No.: 146314516
New in: 2010

used

ZOMA Maschinenhandel TOP SELLER
Location: Land-de

electrically operated chamber furnace with air circulation , as good as new electric heated chamber furnace with air circulation, as good as new Type: EKO - 60/40/150-36 Year built/year: 2010 Fabr./ make: IOB Aue/ Germany Working space/ inner space 600 x 1500 x 410 mm Temperature range/ range of temperature: 500°C Connection value Electr./ electr.power: 38 kW Weight / weight: about 2.5t https://www.west-cs.de/produkte/modelle/ks-90-1-einkreisregler/

other metal working machines
Entry date: 14.01.2020
item-No.: 144603653
New in: 2015

used

Hilco Industrial TOP SELLER
Location: Land-vn

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

other metal working machines
Entry date: 04.04.2019
item-No.: 134158376

used

ZOMA Maschinenhandel TOP SELLER
Location: 04838 Eilenburg, Walther-Rathenau-Str. 2 Land-de

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

other metal working machines
Entry date: 08.05.2018
item-No.: 125158945
New in: 2000

used

Bernd Gail GmbH TOP SELLER
Location: D - Hessen Land-de
Price: 17.500 €

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

other metal working machines
Entry date: 20.12.2017
item-No.: 122419295
New in: 1995

used

ZOMA Maschinenhandel TOP SELLER
Location: Eilenburg Land-de

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

other metal working machines /Cleaning Machines
Entry date: 15.11.2026
approved
dealer
item-No.: 162756083
New in: 2016

used

check sgr-products e.K.
Location: Land-de

Industrial pre-washing system for automated cleaning of workpieces with integrated cleaning system, liquid preparation and heat transfer. Manufacturer: Albrecht Markert GmbH / MARKERT CLEAN-TEC System name: HD cleaning system AF 260 / pre-washer 2 Factory number: A15.8482 Year of Make: 2016 Operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Nominal power: 65 kW Rated current: 95 A Fuse: 100 A Degree of protection: IP54 Bath capacity according to flow diagram: 2,000 litres Cleaning technology: Liquid cleaning with pump and filter system Workpiece handling: Robots shown in a flow diagram Control equipment: Siemens SENTRON PAC4200 energy meter System design: closed, large-format cleaning booth Media supply: piping, pumps, valves and pressure gauges Wiring diagram: 17-EPH-76C 303166/1 Heat transfer station: HAFNER-M ...

other metal working machines /Cutter Heads
Entry date: 15.11.2026
approved
dealer
item-No.: 162756082
New in: 2014

used

check sgr-products e.K.
Location: Land-de

Automated industrial measuring device for testing and measuring cylinder blocks with integrated conveyor technology, measuring mechanics and electronic control. Manufacturer: MARPOSS GmbH Machine type: Measuring device cylinder block Year of Make: 2014 Operating voltage: 3 × 400 V Control voltage: 24 V Frequency: 50 Hz Nominal current MARPOSS: 32 A Pre-fuse MARPOSS: 3 × 35 A Nominal power MARPOSS: 22 kVA Rated current ROTH SCHODER: 8 A Pre-fuse ROTH SCHODER: 16 A Control: Siemens SINUMERIK Measuring system: MARPOSS Operation: MARPOSS industrial control panel with keyboard Measuring mechanics: automated, multi-axis traversing unit Workpiece transport: integrated roller and conveyor technology Pneumatics: Compressed air maintenance unit with pressure indicator and valve technology Protective device: closed protective enclosure with m ...

other metal working machines /Cleaning Machines
Entry date: 15.11.2026
approved
dealer
item-No.: 162756081

used

check sgr-products e.K.
Location: Land-de

Industrial continuous cleaning system for surface cleaning of workpieces using compressed air with integrated roller conveyor technology and automated control. Manufacturer: KNOTH AUTOMATION GmbH Type: Surface Air Cleaner AF45 Year of manufacture: 2014 (week 33) Operating voltage: 400 V AC Frequency: 50 Hz Rated current: approx. 16 A Compressed air connection: G 2" Maximum mains pressure: 8 bar Operating pressure: 4–6 bar Control: Siemens SIMATIC S7-300 Operation: Siemens control panel Energy metering: Siemens SENTRON PAC4200 Safety technology: Pilz safety relay Control cabinet equipment: 24 V power supply, temperature monitoring, RCD, miniature circuit breakers and contactors Cleaning system: Compressed air cleaning with multiple nozzle arrangements Workpiece transport: integrated roller conveyor technology Design: closed cleaning c ...

other metal working machines
Entry date: 13.11.2026
approved
dealer
item-No.: 162755944
New in: 2008

used

check MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 16.000 €

TORMEC ARC-DUAL elbow machine was built in 2008 in Switzerland by TORMEC AG. The machine is used for the production of segmented elbows, reducers, duct end caps and other round fittings used in ventilation and air-conditioning systems. Properly cut sheet metal segments are formed and then joined by closing the seam to create the finished fitting. The TORMEC ARC-DUAL enables the production of components with a maximum diameter of 1000 mm. The machine has two workstations designed for forming the flange and closing the seam. This allows both operations to be performed without the need to change the tooling. The seam-closing mechanism uses an curved movement instead of a linear one, resulting in a precise and aesthetically pleasing seam. An ergonomic knee lever facilitates operation of the machine during work. All this makes the ARC-DUAL elbow making machine an excellent solution for fas ...

other metal working machines
Entry date: 13.11.2026
approved
dealer
item-No.: 162755878
New in: 2018

used

check MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

Qty. 1 Second-hand cut-to-length line including embossing unit Mfc.: Timko Makine Sanayi AS, Changzhou Pinghui Machinery Co., Built: 2018 Stopped: 2023 Material: Aluminum and Alloys Max. Coil Weight: 5 Tons Strip width: 400 -1000 mm Thickness: 0.4 – 3.0 mm Coil ID: 508 mm OD: 1000 - 1600 mm Air pressure: 6 Bar Electric: 380 V / 3 Ph., / 50 Hz Operation hours: 500 h Final sheet length: 3000 – 6000 mm Pallet height: 400 mm Weight: 2.0 Ton LINE UNITS Coil Loading Cart Decoiler and Pressure Roll Sheet Orientation Shovel Pulling Rollers Pre Straightening Automatic Centring Unit Embossing Unit Press Infeed Section and Height Adjustment Unit Tension Unit Winding Feed Stand Coil Wrapper Coil Unloading Cart Guillotine Shears Stacking Unit Vertical-Moving Stacking Conveyor Outfeed Conveyor Perforation Press is not included in the scope of supply!

other metal working machines
Entry date: 13.11.2026
approved
dealer
item-No.: 162755877
New in: 2018

used

check MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

Qty. 1 Second-hand cut-to-length line including embossing unit Mfc.: Timko Makine Sanayi AS, Changzhou Pinghui Machinery Co., Built: 2018 Stopped: 2023 Material: Aluminum and Alloys Max. Coil Weight: 5 Tons Strip width: 400 -1000 mm Thickness: 0.4 – 3.0 mm Coil ID: 508 mm OD: 1000 - 1600 mm Air pressure: 6 Bar Electric: 380 V / 3 Ph., / 50 Hz Operation hours: 500 h Final sheet length: 3000 – 6000 mm Pallet height: 400 mm Weight: 2.0 Ton LINE UNITS Coil Loading Cart Decoiler and Pressure Roll Sheet Orientation Shovel Pulling Rollers Pre Straightening Automatic Centring Unit Embossing Unit Press Infeed Section and Height Adjustment Unit Tension Unit Winding Feed Stand Coil Wrapper Coil Unloading Cart Guillotine Shears Stacking Unit Vertical-Moving Stacking Conveyor Outfeed Conveyor Perforation Press is not included in the scope of supply!

other metal working machines /Workbenches
Entry date: 12.11.2026
approved
dealer
item-No.: 162755870

used

check Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

Offer 26266 Technical data: - Worktop W 2000 x D 700 mm - Worktop thickness 40 mm - Working height 840 mm - 2 roller bearing drawers W 460 x D 540 mm - Drawer height 65 mm - 2 hinged doors - Space requirement approx. W 2000 x H 1100 x D 850 mm - Weight approx. 100 kg

other metal working machines /Miscellaneous
Entry date: 12.11.2026
approved
dealer
item-No.: 162755858
New in: 2014

used

check CNC BOTE Johann Demmel
Location: 86971 Peiting Land-de
Price: 7.500 €

Description: Functional principle: The Opal 460.2 is a fully hydraulic, water-cooled hot mounting press for embedding grinding specimens. The process flow is carried out automatically. The fully automatic slide closure enables trouble-free opening and closing of the embedding area. During hot mounting, the specimen is embedded in an embedding press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding media (e.g. glass fibre reinforced) and the good gap-free position. Hot embedding media are available on the basis of epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Enclosing samples for better sample preparation for further metallographic examinations. Technical data: Manufacturer: ATM Type: OPAL 460.2 Year of Make: 2014 Max. pressure: 310 bar Temperature range: 2 ...

other metal working machines /Driller
Entry date: 12.11.2026
approved
dealer
item-No.: 162755803
New in: 1979

used

check ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

Radial drill VR6A

other metal working machines /Planers
Entry date: 12.11.2026
approved
dealer
item-No.: 162755784
New in: 1960

used

check Indutax GmbH
Location: 59067 Hamm Land-de
Price: used machinery auction RESALE 2.800 €

Design: Converted planing machine to milling machine, travel X-axis 2,600 mm, dimensions of groove clamping plate: length 3,000 mm, width 1,300 mm, tool holder SK50, machine weight 15,000 kg

other metal working machines /Planers
Entry date: 12.11.2026
approved
dealer
item-No.: 162755756
New in: 1957

used

check Indutax GmbH
Location: 59067 Hamm Land-de
Price: used machinery auction RESALE 6.000 €

Fully mechanical version with divisible groove clamping plate, travel X-axis 8,000 mm, dimensions slot clamping plate: length 9,000 mm, width 2,000 mm, max. table load 25,000 kg, machine weight 45,000 kg

other metal working machines /EDM Machines
Entry date: 12.11.2026
item-No.: 162755749
New in: 2003

used

IDS TRADE GMBH
Location: 73525 Schwäbisch Gmünd Land-de

EDM machine Sodick AP 200L BJ 2003

other metal working machines /EDM Machines
Entry date: 12.11.2026
item-No.: 162755748
New in: 2000

used

IDS TRADE GMBH
Location: 73525 Schwäbisch Gmünd Land-de

EDM machine Sodick AP 200L BJ 2000

other metal working machines /CNC Plasma Cutting Machines
Entry date: 11.11.2026
approved
dealer
item-No.: 162755693
New in: 2023

used

check METEC GmbH
Location: Baden Württemberg Land-de

CNC Plasma Cutting Machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 Hypertherm Powermax 125 Plasma Torch with Power Source Cutting thickness up to approx. 30 mm Water table - no filter system necessary - Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Intelligent Torch Height Control (ITHC) Workpiece collision protection (breakaway head) and sheet metal alignment via software Compressed air requirement: Clean, dry air (ISO 8573-1 class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting Software

other metal working machines /EDM Machines
Entry date: 10.11.2026
approved
dealer
item-No.: 162755658
New in: 2003

used

check WTS Maschinenhandels GmbH & Co. KG
Location: 58515 Lüdenscheid Land-de
Price: 12.000 €

Control Fanuc Series 180iS-WB Travels: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm max. workpiece weight 500 kg Machine weight 1,700 kg Power supply 13 KVA Machine can be viewed under power.

other metal working machines /Wobble Riveting Machines
Entry date: 10.11.2026
approved
dealer
item-No.: 162755604
New in: 2000

used

check Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

Offer 26256 Technical data: - Rivet diameter up to 8 mm - Rivet length up to max. 60 mm - Compressive force at 4bar linearly increasing 16 kN - Compressive force at 10bar 40 kN - Projection 300 mm - Stroke 100 mm - Power stroke 6 mm - Air consumption at 4 bar 0.8 L/stroke - Rivet feed via step kettle vibrator - Space requirement approx. W 600 x H 2000 x D 800 mm - Weight approx. 300 kg

other metal working machines /Water Jet Cutting Systems
Entry date: 08.11.2026
approved
dealer
item-No.: 162755459
New in: 1997

used

check sgr-products e.K.
Location: Siegen Land-de

CNC-controlled high-pressure waterjet cutting machine with two cutting heads, abrasive feed and two external high-pressure pumps. Manufacturer: H.G. Ridder Automatisierungs-GmbH Model No.: HWH-6020-2 Machine Type: CNC Waterjet Cutting Machine Year of Make: 1997 Working area: 6,000 x 2,000 mm Number of cutting heads: 2 High pressure pumps: 2 external pumps Maximum pump pressure: 4,000 bar each Control: Siemens SINUMERIK Cutting Method: Waterjet Cutting with Abrasive Feed Cutting head designation: WARDICUT Abrasive Feeder: Available Cutting table: water basin with slat support Machine order number: 10317 Schematic number: E-10317 Electrical connected load: 100 kVA Mains connection: 3-phase Mains frequency: 50 Hz Operating voltage: 400 V Control voltage: 230 V AC / 24 V DC Rated current: 150 A Intended pre-fuse: 200 A, slow blow

other metal working machines /Miscellaneous
Entry date: 05.11.2026
approved
dealer
item-No.: 162755337

used

check CNC BOTE Johann Demmel
Location: 86971 Peiting Land-de

Technical data: Manufacturer: Roland Type: LEF2-200 Printing method: Piezo inkjet process Print width/print length: max. 508 x 330 mm Print resolution: max. 1,440 dpi Attachable objects for printing Width: max. 538 mm Length: max. 360 mm Thickness: max. 100 mm Weight: max. 5 kg Ink Type: ECO-UV (EUV, EUV4), 220 ml cartridge Colors: cyan, magenta, yellow, black and white Dimensions and weight External dimensions L/W/H: 1,202 mm, 962 mm, 549 mm Weight: 110 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: UV lamp for curing the printing ink (built-in UV LED lamp) Automatic sleep function Included parts: Power cord, RIP software, cleaning fluid, drip tab, user documentation

other metal working machines /Powder Coating Equipment
Entry date: 05.11.2026
approved
dealer
item-No.: 162755314
New in: 1992

used

check MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

Qty. 1 Second-hand Vertical Aluminium Profile Powder Coating Line Mfc.: TRASMETAL, GEMA & SIEMENS Built: 1992 The pistol range converted by TREVISAN in 1996 Full refurbished of the pretreatment section by TREVISAN in 2017 The system described here is used for vertical powder coating of aluminum profiles Parts to be treated: Aluminum profiles with 6.5 m Production performance: about 400 profiles/hour Hanging distance: 150 mm Speed considered: 1 m/min for normal profiles The system design has been taken into consideration average values. Weight 5 Kg/profile (7m). The maximum profile section to be treated is 240x120 mm. The oven is still in almost its original condition, while all other components, such as the transport system, the transport chains, the painting booth and the coating technologies, as well as the pre-treatment and final treatment line, have been constantly optimi ...

other metal working machines /EDM Machines
Entry date: 05.11.2026
item-No.: 162755302
New in: 2008

used

IDS TRADE GMBH
Location: 73525 Schwäbisch Gmünd Land-de

EDM machine Sodick AP 500L BJ 2008

other metal working machines /EDM Machines
Entry date: 05.11.2026
item-No.: 162755301
New in: 2007

used

IDS TRADE GMBH
Location: 73525 Schwäbisch Gmünd Land-de

EDM machine Sodick AP 200 L BJ 2007 (defective)

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)