subcategories
(3rd category level)
Manufacturer:
Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional
MAX DIAM 250 X 2000
max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diameter of the table top: 32 mmCenter height above table: 70 mmDiameter of the counterholder tip: 32 mmStroke of the counterholder tip: 20 mmdist. between centers: 1000 mmz-travel: 1100 mmy-travel: 230 mmtable diameter: 260 mmSpur gear module min.: 0,5/50,8 mmSpur gear helix angle: 45 °weight of the machine ca.: 1,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: mmgear width: mmmax. module: 3 min. module: internal dia. - max.: mminternal dia. - min.: mm: CNC workpiece length - max.: 130 mmcontrol: Siemens 840 D total power requirement: 20 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 3 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
max. wheel diameter:600 mmmax. module:10 min. module:2 total power requirement:1,4 kWweight of the machine ca.:0,68 tdimensions of the machine ca.:1,6x0,75 mdiameter of hob:15 mmgear width:140 mm
max. wheel diameter:200 mmmax. module:7 weight of the machine ca.:15 ttable turning speeds:100 U/mintable diameter:180 mmhob turning speeds:750 U/minmax. hob diameter:160 cutter length max.:230 mmAvailable from end of 2025
A used rotor grinding machine Available from approx. week 33 / 2025With filter system
max. wheel diameter:300 mmgear width:110 mmmax. module:6 weight of the machine ca.:10,5 t
max. wheel diameter:200 mmgear width:50 mmmax. module:6 table diameter:168,14 mmboring diameter:65,532 mmweight of the machine ca.:11 ttable turning speeds:0-1.000 U/minlength of stroke min./max.:0-70 mmno. of strokes:180-1.800 Stück
max. wheel diameter:280 mmmax. module:5 min. module:1 min. number of teeth:7 toolpiece turning speed range:4.000...10.000 U/mintool length:210 mmCBN
max. wheel diameter:900 mmmax. module:10 weight of the machine ca.:8200 kos.hob dia. - max.:190 mmcutter length max.:320 mmmilling spindle speeds (infinitely variable):13-80 U/minworkpiece length - max.:750 mmmax. workpiece diameter:150 mmCounter holder milling mandrel is missing
max. wheel diameter:200 mmgear width:60 mmmax. module:7 weight of the machine ca.:15 ttable diameter:180 mmtable turning speeds:100 U/minhob turning speeds:750 U/minMachine in good condition, without feed, without automationAvailable 24.08.2024
max. wheel diameter:280 mmmax. module:7 weight of the machine ca.:13 ttable turning speeds:100 U/mintable diameter:250 mmmin. number of teeth:4 hob turning speeds:1500 U/minmax. hob diameter:160 cutter length max.:230 mmMachine in good condition.Available 01.08.2024
total power requirement:413 kWInduction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mmX (electromechanical) 200 mmMaximum part diameter 600 mmMaximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30
weight of the machine ca.:4 t
max. wheel diameter: mmgear width: mmweight of the machine ca.:7000 kgdimensions of the machine ca.:9130 x 3895 x 3450 mmmax. top circle diameter:80 mmmax. length of teeth cutting:170 mmTotal length:240 mmtaper diameter:32 mmslide travel radial ( X-axis ):100 mmslide travel tangential ( Y-axis ):160 mmaxial movement Z-axis:300 mm/minworkpiece spindle - bore:45 mmelectr. connected load:44 kVA
max. wheel diameter:130 mmgear width:170 mmmax. module:3 min. module:0,5 total power requirement:48 kVAweight of the machine ca.:9 tdimensions of the machine ca.:7,64 x 3,14 x 3,25 mFor technical data, see PDF-File enclosed
max. wheel diameter:40-200 mmtotal power requirement:31,3 kWweight of the machine ca.:4 t
max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:6,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation
weight of the machine ca.:8 tdimensions of the machine ca.:2,95 x 1,6 x 2,36 mchucking diameter:250 mmswing diameter:265 mmx-travel:170 mmz-travel:200 mmspindle turning speed range:1.500 U/minspindle bearing diameter:100 mmPick-up machine
frequency:5.000-150.000 Hzweight of the machine ca.:10 tZ-axis:45-50 mmX-axis:pneumatisch working lenght:45-50 mmwith induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit
max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation
max. wheel diameter:80 mmmax. module:3 total power requirement:25-35 kWweight of the machine ca.:10 tworkpiece weight:15 kgworkpiece length - max.:-50+450 mmtable diameter:145 mmdiameter of hob:90 mmcutter length max.:220 mmhob turning speeds:1.000 U/min
