subcategories
(3rd category level)
Manufacturer:
Vertongen Tenoning Machine P04 year 1979 S/N 5811 in great condition from a vocational school in Finland Included with tools Automatically adjustable tenoning machine Saw unit, max cutting height 130mm, spindle 30 mm /3000rpm, 400mm diameter saw blade 2 horizontal cutter blocks diam 160mm, spindle diameter 40 mm /4500rpm 2 vertical spindles 40 mm working height 160mm, 4000rpm ( Top + bottom ) 1 vertical spindle 40mm, working height 160mm / 4000rpm all spindles are adjustable in the horizontal and vertical direction Tenoning carrige 1000x280mm Sliding guide 2400mm with manual pressure and fence Power 380V 3-phase 50Hz Extraction needs (dust collector) 2400 m3/h Weight approx.1100 kg technical information under subject for corrections
KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely r ...
used
Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg
HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...
Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mill-tenoning machine SCM Flex 1 Spindle diameter 40mm Total spindle height 200mm Two-speed motor with a power of 6.6/8kw Variable speed on belts: 3250/6500 and 5000/10000r.p.m Electric spindle lift Maximum cutter size 270mm Cutting unit 2.2kw Automatic Sidecar Pneumatic material clamps Four-roller feed Net price
This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information.
This ESSETRE TECHNO was manufactured in 2007. A CNC Wood Machining Centre featuring a Z-axis stroke of 1320 mm and a maximum electrospindle power of 12 kW at 7000 rpm. It supports tool sizes from 3 to 30 mm with a manual clamping system. Ideal for diverse woodworking applications. Contact us for more information about this machine.
This 5-axis BIESSE ROVER C 9.65 was manufactured in 2013, featuring a large table size of 8190mm x 1800mm x 250mm, ideal for diverse and complex woodworking tasks. If you are looking to get high-quality milling capabilities, consider the BIESSE ROVER C 9.65 machine we have for sale. Contact us for more information.
This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine.
Key data: 1000 mm, 40 mm
SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment
Vacuum pump Becker Rotary Vane Vacuum Pump Type KVT 3.100 Item no. B.153231g Built in 1999 Motor 3.0/3.6 kW Speed 1420 / 1700 rpm Pumping speed 100/120 m³/h Suction pressure/vacuum -900 mbar Dimensions 1000 mm x 450 mm x H 500 mm Shipping Dimensions 1200 mm x 800 mm x H 700 mm Weight with pallet 120 kg
This 3-axis IMA BIMA Quadroform C80/280 was manufactured in 1996. It features a spindle speed of 16,000 rpm and travel distances of X: 2800 mm, Y: 660 mm, and Z: 230 mm. Pendulum processing is possible, enhancing operational flexibility. It includes its own IMA control system. If you are looking to get high-quality milling capabilities, consider the IMA BIMA Quadroform C80/280 machine we have for sale. Contact us for more information.
This BIESSE ROVER A was manufactured in 2007. A used CNC Wood Machining Centre featuring a robust 7 kW electrospindle, versatile BH 21L drilling head, and a turret tool magazine with 10 places. It includes a vacuum system with a 90 m3/h pump and auxiliary support, enhancing operational efficiency. Ideal for detailed woodworking tasks. Contact us for more information about this machine.
Verboom PN5 Left Brand: Verboom Type: PN5 Left Year of construction: Standard: EU conformity (SHA tested) Machine Data: Saw: 2.2 KW positioned over the product Spigot heads: 2 2.2.kW, handwheel adjustable spigot heads positioned on top of each other and positioned by means of Siko analog-digital readout. 1e Vertical spindle: 5.5 kW direct drive spindle: 20040 mm and position with manual positioning and analog-digital readout. 2e Vertical spindle: 4.0 kW direct drive spindle: 120mm and position with manual positioning and analog-digital readout. Table: Manuel, with clamping Extendable length stop Stroke can also be used as miter stroke Dimensions: 3.5(0.9+0.9)1.6m
Key data: 2 mm, 8 kW, 40 mm
Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis ...
Key data: 3 mm, 10 kW, 3 mm
MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm
Key data: 3 mm, 6 kW, 30 mm
Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...
Key data: 3 mm, 8 kW, 30 mm
Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change ...
Key data: 1 mm, 10 kW, 30 mm
Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table ...
Key data: 3 mm, 10 kW, 30 mm
Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...
used
Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...
Key data: 3414 mm, 1313 mm, 200 mm
SCM Tech99L Processing
Fields F7 Table milling machine Milling spindle swivels 45° backwards Sliding table 2m Motor 4kW 400V 50Hz Milling fence diameter 230mm Year of manufacture 1989 little used Right-left rotation Speeds: 3700 - 6500- 7800 rpm Classic Line G&-5180-o3185
The InfoTEC 4121 PRO EVO is a 3-Axis vertical machining center manufactured in 2020. It features a large working area of 2200 x 4100 mm and high-speed axes with speeds up to 80m/min in X and Y directions. The machine includes a powerful 8.5 kW HITECO electrospindle, capable of speeds from 1000 to 24000 rpm, and a multifunctional drilling unit. Ideal for advanced woodworking, consider this InfoTEC 4121 PRO EVO for its precision and versatility. Reach out for further details regarding this woodworking machine.
