Manufacturer:
centre height: 350 mmweight of the machine ca.: 50 KGtool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Circulation machine WEINIG UNIVAR 10 as a spare parts carrier from a UC-Matic window system. Year of construction: 1997 Sutron BT20 control Machine incomplete Details on request Illustration similar.
Tapping and slot machine WEINIG UNITEC 10 as a spare parts carrier from a UC-Matic window system. Year of construction: 1997 Sutron BT20 control Machine incomplete Details on request.
Angle system – window machine Weinig Unicontrol Type: UC 5P Year of Make: 1992 with PLC control Operation on the machine Incl. window tool make GOLD IV 78 with and without rain rail Good, ready-to-use condition. Demonstration – trial run possible.
SPECIFICATIONS: Milling depth: 285 mm Milling width: 21 mm Voltage: 230 V
cut-off saw: 3 KWSpindle diameter: 40 mmSpindle length: 185 mmNumber of tools: St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Elumatec SBZ 131 7.2 m 3 Axis CNC machine Year: 05/2018 Processing length: 7,200 mm X-Axis: max. 7,200 mm Y-Axis: max 485 / 310 mm Z-Axis: max 340 / 260 mm Spindle: 6,000 rpm 6 kW S1 Tool holder BT 30 Tool changer: 8 Clamps: 8 Operation hours: 30.762 Spindle hours: 11.582 Bar code scanner Two separate working zones enable machining in shuttle operation. There is also a central laser scanner on the operator's side to protect the area for maximum safety. + camera Angle routing heads 18.000 rpm High-speed spindle 18,000 rpm
Elumatec SBZ 151 13.3 m 5 Axis CNC machine Year: 02/2017 Processing length: 13,300 mm Saw blade: 500 mm X-Axis: max. 13,300 mm Y-Axis: max 1,150 mm Z-Axis: max 715 mm A-Axis: +/- 110° C-Axis: +/- 180° Spindle: 24,000 rpm 21 kW S1 Tool holder HSK 63F Tool chamger 20 + 1 (saw blade) Clamps: 16 Operation hours: 39.696 Spindle hours: 23.042 Bar code scanner Two separate working zones enable machining in shuttle operation. There is also a central laser scanner on the operator's side to protect the area for maximum safety. + camera Automatic length measurement on both sides with Z travel Tapping without compensation chuck Double clamp
For milling transom and door profiles made of aluminium and plastic Swivel range material stop: up to 60° to the right & left Max. milling height: 150 mm Max. milling depth: 110 mm Max. milling length: 400 mm Max. profile height: 200 mm Max. cutter diameter: 280 mm Milling motor: 2.5 kW Speed: 2,800 1/min
Code: 0074 Brand: OMGA Model: CTF 220 - CE Standard Automatic bench for reading and cutting 45 degree glass beads for window frames - CE Standard Features: A pneumatic system of measurement and simultaneous positioning of the blades ensures maximum precision when cutting the glass beads In each individual cycle two beads may be be cut at the same time The plane of the CTF table may also be used for other operations (e.g. touching up or grouting the sash or as a sanding table) Technical data: Processing capacity min/max mm 250/2220 Blade diameter mm 150 F 30 Motor power each Kw 1,18 Compressed air 6 bar Overall dimensions mm 3000 x 1840 x 950 h Weight kg 325
Dimensions (L,W): 2000 x 1200 mmWeight: , kgtiltable yes/no: nein Bauerle work table------------------------Length 2000mmWidth 1200mmHeight approx. 900 mm (height adjustable)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suspended window conveyor Overhead conveyor with 25 hooks Double hooks With 4 bows Dimensions approx. 10 meters x width 2.5 meters
Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h
cut-off saw: 1,85 KWSpindle diameter: 40 mmSpindle length: 130 mmpower main drive with: 4,4 kWFesto slotting machine ZA---------------------------with crosscut saw1 slotted spindleZA length stopFor sale on behalf of the customer in the IS condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0049 Brand: TDF - ITALY Model: FAST 3200 - CE Standard Hardware assembly bench for wooden, aluminum, pvc window frames - CE Standard Technical data: Tilting work surface mm 3400 x 1000 Table height mm 900 Piece Pneumatic clamping Cremone bolt cutting shear 3-spindle handle drilling unit METABO - Watt 720 - Rpm 2600 Horizontal height adjustable milling unit FELISATTI - Watt 1800 - Max speed 22000 rpm Height adjustable horizontal drilling unit METABO - Watt 400 Total Kw 3 Volt 220 single-phase Overall dimensions mm 4200 x 1500 x 1050 h Weight kg 300
SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit
Code: 0030 Brand: MARZANI Model: RE/2 Automatic slot-cutting machine for window shutters Technical data Spindle coupling mm 10 Bit rotation 10000 rpm Two uprights can be processed simultaneously Several cutting intervals executable Main motor Hp 2 Working unit inclination Bits lowering adjustment Feed adjustment Slot skipping Compressed air 6-7 bar Overall dimensions mm 1450 x 950 x 1400 h Weight kg 440
Special fingerboard / end-grain wood assembly router saw Brake motor 4 kW, 3000/6000 rpm Ruler stop with digital display Motorized Cart Travel pneumatic presser Shaft length180 mm Height of wood passage150 mm Shaft diameter50 mm Blade diameter400 mm Router3000 rpm Search by TypeSimple
Minimum opening: 200 mm Maximum opening: 3200 mm Composition: Bottom scoring machine diameter 200 mm, swivelling Shredder saw diameter 300 mm, swivelling Engine power: 4kW (5.5 hp) Automatic rotor, swivelling Shaft length: 200 mm, bore 40 mm Engine power: 7.5 kW (11 hp), steerable Second spinning top with a maximum diameter of 280 mm, adjustable Engine power: 7.5 kW (11 hp) Router saw, swivelling Engine power 5.5 kW (8 hp) Rotatation: 3000/6000 rpm Passage height: 180 mm Cleat spacing: 400 mm Max chain/beam distance: 200 mm 50/100 Hz Converter LENZE H410 control for moving and adjusting the 10 units 650 mm vertical, 230 mm horizontal Search by TypeDouble
Composition: Saw: Blade diameter: 350 mm Shaft diameter: 50 mm Cutting height: 120 mm Engine: 2.2 kW (3 hp) Top Dispenser: Tool holder length: 120 mm Tool holder diameter: 150 mm Engine: 2.2 kW (3 hp) Bottom unwinder: Tool holder length: 120 mm Tool holder diameter: 150 mm Engine: 2.2 kW (3 hp) Spinning top: Shaft diameter 40 mm, length 130 mm Engine: 4 kW (5.4 hp) Cast iron mobile trolley (1100 x 370 mm) Manual Presser Aluminum ruler Suction nozzle 2 x 100 mm
Mecal 4-axis VMC. X axis stroke: 4225 mm Y axis stroke: 530 mm Z axis stroke: 410 mm A axis stroke: ± 125° Electrospindle rated power: 6.0 kW Max rotation speed: 18000 rpm Weight: ± 3200 kg Version: KOSMOS TM DPM (Mobile Table with Device for Positioning the Clamps)
Number of motors: 1 Stück: 450-2400 mmControl: manuell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TIGER Single Bar Hydraulic Clamp AU Model: - Working dimensions 3000x1700mm - with pressure regulator pressure gauge - manual cycle, or automatic with timer - with safety photocells Machine not CE compliant, for export
1. Machining center, type BAZ 1000-G6 Basic (Running direction from left to right) min. cutting length (only PVC - removal from real buffer item 3): 296 mm Min. part length (PVC with steel): 350 mm Max. part length (PVC with steel): 4,000 mm Max. profile depth: 95 mm Max. profile height: 132 mm 1.2 Automatic feeding magazine for manual loading, for 12 Profiles of max. 6,500 mm length, automatic transfer station into the transport path of the gripper. The magazine can be opened from the front and loaded sideways. 1.3 Slide-in device for PVC profiles up to 6,500 mm in length with NC-positioned gripping pliers, which are controlled by highly dynamic linear servo motor. Positioning speed up to 150 m/min. 1.3. Profile length measuring device, built into the transport pliers incl. optimization software for the measured Part lengths. 1.4 Automatically adjustable p ...
Welding and plastering line consisting of Hollinger + Rotox Hollinger is equipped with: - All welding times can be set according to profile. - Welding accuracy of 0.2 mm to external dimensions. - Heated clamping plates with interchangeable limiting knives on the welding mirrors. - Automatically movable limiting dimensions (white 1.2 mm, coloured 0.5 mm). - Allowances with adjustable sealing knives. - Shaping and cutting gasket moulds for shaping the inside corners. - Smallest welding dimension small with thicker allowances 330 x 500 mm. - Largest welding dimension 3800 x 3300mm. - The heads retract to insert the profiles. - Set to 5 mm burn-off (each side 2.5 mm). - Windows 2000 Rotox is equipped with: - Four-axis cleaner for fast cleaning. - Automatic turning station with a gripper arm for gentle turning of large, heavy elements. - Automatic turning up to 3,000 ...
Cutting and machining center ALBZ 100 L 1. Aluminum machining center ALBZ 100 L (Running direction from left to right) Profile length: min. 600 mm / max. 7,500 mm Profile width: min. 11 mm / max. 250 mm Profile height: min. 15 mm / max. 300 mm Wall thickness: max. 5 mm composed of: 1.1 automatic feed magazine for manual loading, for 12 profiles of max. 7,500 mm length, automatic transfer station to the transport path of the gripper. The magazine can be loaded from the front. 1.2 Insertion device for profiles up to 7,500 mm in length with NC-positioned gripping pliers. 1.3 Automatically adjustable profile guides for different support contours in the profiles. 1.4 Height and width measuring device for detecting profile tolerances, including software for determining the necessary cutting length correction. 1.5 Processing station with three servo axes (X, Y, Z inter ...
Cross-cut saw diam. 300 mm Milling spindle diam. 40 mm Sliding table with Festo length stop Suction nozzle saw 120 mm dto. Milling machine 140 mm Cable + plug 16 Amp, without bed. tools Workshop overhauled
Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs
Code: 0432 Brand: STETON Model: STP - CE Standard Automatic hydraulic clamp with mobile beam for wooden frames, frames and various - CE Standard Technical data: Useful working capacity mm 3000 x 2000 N° 2 horizontal cylinders diameter mm 50 - 1300 Horizontal stroke kg 5000 N° 2 vertical cylinders diameter mm 80 - 1100 Horizontal stroke kg 13000 Max pressure kg/cm2 160 Motor Kw 2,2 N° 3 positions of support bar N° 7 positions of horizontal reference stops Automatic control board Overall dimensions mm 3900 x 1200 x 2680 h Weight kg 1800
Code: 0430 Brand: SCM Model: TEN 220 CLASS - CE Standard Tenoning machine for window frames with rapid tool change - CE Standard Technical data: Rapid tool change with ISO 40 tool taper All tools are always ready and mounted on the relevant spindles Few seconds to position the tool are needed Circular saw unit Max blade diameter mm 400 Max cutting height mm 120 Rotating speed rpm 3000 Exhaust outlet diameter mm 120 Longitudinal blade stroke mm 120 Stops revolver n° 6 Motor power Kw 3 Workpiece support table Table stroke towards the tool mm 105 Tilting fence with stops +/- 45° Extendable stop up to mm 2800 Rotating chipbreaker Stops revolver n° 5 Tool holder shaft Max tool diameter mm 350 Tool rotating speed rpm 3600 Exhaust outlet diameter mm 120 Motor power Kw 5,5 Rapid tool change system ISO 40 Supplied spindles Compressed air 6 bar ...
