We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
used
A very well-preserved veneer press from the company Joos is offered. The key data of the press are: Press force max. 1200 kN Adjustment range 10-100% Total baling area 3100 x 1350 mm Spec. Pressure at full design 3.0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating pressure hydraulic 398 bar Height of the pressing chamber 400 mm Medium heating plate 3100x1350 gold 130°C Temperature control unit 18 kW Coloured touch panel
used
Veneer saw long fence LZ 5/2 - 3500, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Langzauner A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3500mm Cutting and joining height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear storage table with penetrating finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display Format table is very solidly built and runs on parallel circular guides, it is slightly offset to the right so that cross-sections can be made on the veneer packages on the left side Angle stop on the stop table and on the front shelf for head cuts of the veneer packages Special equipment with rack and pinion compensation for the pressur ...
used
For sale is a veneer assembly machine FWJ 900 from Kuper. The machine is visually and technically in good condition. In 2020, a new compressed air/maintenance unit was installed for 155€ by the company Kuper. -Passage width approx. 920 mm -Veneer thickness approx. 0.4 - 2 mm -Feed speed approx. 15 m/min
used
Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95
used
Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31
used
Code: 0489 Brand: CASATI MACCHINE Model: 3100 - CE Standard Automatic veneer guillotine for joinery, furniture, doors, window and door frames, sliced veneers and other applications – CE Standard Technical data: Sturdy structure Hydraulic power unit for blade cutting movement Cutting length 3100 mm Electrically operated rear stop Cutting inspection light Pump motor 4 Hp Register motor 0,5 Hp Safety photocells Side guide for angled cuts Overall dimensions mm 4150 x 1600 x 1500 h Weight kg 3200
used
Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available
used
Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available
Chopper, Faz Model, Manufactured by Josting
used
Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg
used
TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW
used
Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300
used
Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment
used
KUPER FW-920 Zig-Zag Veneer Gluer Passage width max. approx. 920 mm, veneer thickness approx. 0.4 - 2 mm, feed speed approx. 15 m/min
used
Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.
used
MONGUZZI CNC 2-Knife Veneer Cutting Machine AFD-52-3000 from location for sale.
used
TECHNICAL DATA: Saw blade width: 400 mm Installed power: 5.5 kW Hydraulic operation EQUIPMENT: Hydraulic power unit (Tecno Tubi - OL95/132)
used
Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł
used
SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V
used
Cutting length: 2300 mmMax pack height: 80 mm.Hydraulic pressure beam2-hand operationLight beam securityMotorised back fence
used
For the joining of veneers with thicknesses 0,4 up to approx. 3 mm.The joining medium is a glue impregnated thread which is applied in zig-zag or in a wavy line accross the joints of the veneer sheets by means of a heated thread guideThroat depth: 1150 mmFeed speed, infinitely adjustable: 10 to 30 m/minPower installed: 1,5 kW
used
thread splicer machine for veneer model KUPER FW 1150 second hand machine volt. 380/50
used
Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood., cutting length: 3.000 mm, Saw blade diameter: 180 mm, engine: 2.5 hp
used
This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.
used
Plate dimensions: 3.000 x 1.350 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: Elektrisch Specific pressure: 2,84 kg/cm²Total pressure: 115 toMotor output: 2,2 kWDimensions (L/W/H): 3.500 x 1.630 x 2.200 mmweight of the machine ca.: 5.000 kgsafety device: Notaus-Trittleiste The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm.
used
Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t.
used
Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: yes, Leimfilteranlage LFA: yes, Intermediate transport mm: 3000, Year :ca.1990
used
Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984
used
Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2006, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :2006