subcategories
(3rd category level)
A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.
Multivac R245, Available from stock., - Film width 320mm, - Stroke 480mm, - 5 sets of tooling included, - Spare parts, - Big vacuum pump build-in, high capacity machine, - Ink stamp, STC just acquired this equipment., While we currently received a lot of new stock we didnt find the time yet to do any work to it., Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine., If you are interested obviously feel free to contact us so we can gather more information for you.
A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.
Working width: 320mm, max. drawing depth: 70mm, drawing depth adjustment: 5mm, film width bottom film/top film: 355mm/420mm, format size: 1.1-2.1, frame length: 4000mm, number of tracks: 2, machine dimensions X/Y/Z: approx. 4200mm/1100mm/2000mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
Max. Output: 12 cycles/min, film widths: 320/360/420/460/520mm, take-off lengths: 200 - 420mm. Max. Drawing depth: 190mm, top film: max. 300µm, compressed air: min. 6 bar. Including two format sets (round cups and square cups), as used for dips for chicken nuggets or ready-made salads. Outer dimensions X/Y/Z: approx. 6200/1200/2200mm, weight: approx. 2800kg incl. accessories. On-site inspection is possible.
Max. draw-off length: 320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5500mm, width: 1200mm, height: 2000mm, without tools.
Draw-off length: 225-320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5300mm, width: 1100mm, height: 2200mm, without tools.
Ulma TFS700 thermoformer, Good working thermoformer with build in Busch vacuumpump., Available with multiple moulds., - 420mm film width, - 400mm advance, perfect for big bulky packs with the supporting roller conveyor below the bottom film., machine is roughly 6 meters long., STC just acquired this equipment., While we currently received a lot of new stock we didnt find the time yet to do any work to it., Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine., If you are interested obviously feel free to contact us so we can gather more information for you.
Multivac R570CD thermoformer with SKIN-pack and MAP combined., A monster machine ideal for high capacity packing of red meat or similar., First a skin-pack packaging is made, after this process a top seal with MAP is added to the tray. This to ensure the best possible shelf life and the fresh colour of the meat is maintained.
Multivac 530 Condition: In good working condition Film width: 575 mm This high-speed machine is designed for maximum productivity and is suitable for industrial production environments. The Multivac R 530 offers a wide range of additional equipment options and stands out for its high efficiency, safety, and hygiene standards. It can be equipped with a cleaning system for easy maintenance. Die set configuration: 4:2 Package dimensions (LxWxD): 387 x 114 x 45 mm Capacity: 7 cycles per minute Ideal for working with sliced cheese Equipped with a labeling machine Labeling machine working speed: 100 mm per second
After a general inspection, I am selling a Multivac R 126 vacuum packaging machine from 2011.
Multivac Thermoformer R 240 for hardfoil 200x300 mm Year 2005 in good working condition as back from customer
Tray Sealer/Skin Packer Model: Erme TSK 410 incl. compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. machines can be equipped with tools for skin-packs
Used tray thermoforming machine M-PRO-TEC Verpackungsmaschinen GmbH - Tool for trays or trays of 190 x 144 mm built-in - Documentation available - Good condition, ready for immediate use
2xMultivac R 530, lengh: approx. 11 mtr., incl. gas, no pump some form tools 1 x available in september, 1 x in october
Hopper and vibratory trough for Uhlmann UPS
SPECIFICATIONS: MAXIMUM FILM WIDTH: 420mm MAX FEED: 180mm MAXIMUM PACKING HEIGHT: 40mm FILM ROLL DIAMETER: 250mm MAXIMUM FILM CORE DIAMETER: 76mm INSERTION RANGE: 360mm WATER CONSUMPTION: 60-100l/h COMPRESSED AIR CONSUMPTION: 220l/min ELECTRICAL SPECIFICATIONS: 200V, 50/60Hz, three-phase MACHINE DIMENSIONS: 1670x960x1770mm The Ulma machine was used to vacuum a tofus-like product. The tool used consists of 3 mold plates with 2 center separations. The size of the format is (160x112.67mm inside; 180x128.67mm outside). The machine is in very good condition. If you are interested, you are welcome to visit it in Berlin. The last service maintenance was in October 2023.
Tooling: 4 x 2; approx size 212 mm x 115 mm Film width: 563 mm
Film width: 422 mm It has only run for 867 hours.
Producing 14g + 20g portions – 32 portions per cycle for catering trade Rarely available with this format. Perfect for portions of jam, ketchup, butter, stock, ice cubes etc.
Refurbished by Multivac 2017 Film width: 560 mm Pack size: ext 230 x 110; internal 207 x 85 x 22 depth Can be equipped with Multivac MBS 120 Converger (at extra cost)
422 mm wide bed Tooling: 2 x 2 x 177 mm x 155 mm Equipped with Multiprint SM10 inkjet printers Previously used for packing cheese
Running hours: 1730 Film width: 423mm Tooling – 2 x 3 x 180mm x 113mm or 1 x 180mm x 370mm
Semi rigid film with gas – 423mm wide. 4 across 180mm x 80mm shingled (4 slices of black pudding) or 1 x 375mm x 180mm. The machine is 3.1m long. Running hours: 2423
Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600
Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006
Multivac R 140 , built in 2008 , film width 420 mm , take-off 300 mm , variator tool, formats 1.1 + 2.1 + 2.2 , built-in vacuum pump, photocell with pressure mark control. well-maintained condition. Length 3.6 >meters
Film width 420 mm , Trigger 250 mm , Vario tool, MAP Machine completely overhauled and immediately available
GEA packaging machine PowerPak RT Type 2, year of construction 2015, with upper and lower web labeller, Tirolabel TL150 and B 150,, max. label width: 150 mm,, LPM 107 - label printer with ribbon,, maximum power 33 kW, without vacuum pump,, 420 mm working width,, 390 trigger,, rigid film,, 60 mm drawing depth,, Jumbo rolls - processing, double roll unwind top film,, Format 3.2 - one peel corner per pack,, Seal shape with perforation, for MAP (back gassing), only approx. 1,800 operating hours!, power: 33 kW
