subcategories
(3rd category level)
Mosca Doppelkopf - Pallet strapping machine with press for the corrugated board industry Manufacturer: Mosca Pressing pressure: max. 5,000 kg Machine type: KPK-131-26 Max. clearance height: 2,800 mm Max. passage width: 2,600 mm For PET strapping 12 - 13 mm Year of construction: 1993; Aggregate heads were renewed in 2009 The controller is of type S5 and can be converted to Siemens S7 if desired. The strapping machine is equipped with 3 strapping heads. The second strapping head can be moved laterally. The press has a walk-on, upstream centering roller conveyor with turnstile. Another turnstile is located under the press, which allows the pallet to be turned over before strapping. Mosca Double-Head Pallet Strapping Machine with Press for the Corrugated Industry Manufacturer: Mosca Press Force: max. 5,000 kg Machine Type: KPK-131-26 Max. Pass Height: 2,800 mm Max. P ...
width of the strips: 5 - 15,5 mmtension force: 70 - 500 NCyklop strapping machine from 2007- Strap width: 5-15.5 mm- Output: 10-20 straps/min- Connection voltage: 230 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Cyklop continuous pallet strapping machine is available. Throughput width: 2700mm, throughput height: 2900mm, strapping speed: approx. 100 pallets/h, min. pallet dimensions X/Y/Z: 600mm/600mm/500mm, max. pallet dimensions X/Y/Z: 2000mm/2450mm/2000mm, machine dimensions X/Y/Z: approx. 2000mm/7200mm/4300mm, weight: approx. 4000kg. Including additional strapping unit, sealer and various motors. Documentation available. On-site inspection is possible.
used
Several Mosca strapping machines are available. Table dimensions X/Y: 980mm/540mm, working height: 820mm/900mm, strapping: polypropylene (PP), strap width: 5mm/8mm/12mm, strap thickness: 0.4mm/0.8mm, strap coil core diameter: 200mm, core width: 190mm, weight: approx. 120kg. Documentation available. On-site inspection is possible.
Strapping time: approx. 2.5s, strapping band: polypropylene (PP), strap width: 10mm/12mm, working height: 810mm, sheet dimensions X/Y/Z: 850mm/600mm/800mm, max. workpiece weight: 50kg, machine dimensions X/Y/Z: approx. 650mm/1450mm/1550mm, weight: approx. 240kg. Documentation available. On-site inspection is possible.
Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.
Strap width range: 9mm-12mm, strapping capacity: 35rpm, max. package width: 600mm, max. package height: 1200mm, strap tension range: 7kg-70kg. On-site inspection is possible.
Strapping capacity: 28/h, strap width: 12mm, strap tension: 100N-3500N, frame dimensions X/Y: 800mm/800mm, working height: 810mm, machine dimensions X/Y/Z: 1430mm/620mm/1540mm. On-site inspection is possible.
Packaging material: stretch film, max. pallet height/weight: 2100mm/1500kg, turntable diameter: 1500mm, turntable speed: 10rpm, weight: approx. 500kg, control: conventional.
A semi-automatic strapping machine with a transport box is available. Strap width: 9mm-15mm, max. strap tension: 70kg, power: 30rpm, working height: 820mm-920mm (adjustable). Dimensions X/Y/Z: 1200mm/600mm/1540mm, weight: 110kg. Including transport box. On-site inspection is possible.
Frame dimensions: 550x400mm, package dimensions: 180x180-500mm, package height: 10-380mm, max. package weight: 25kg, height: 885-930mm, weight: 350kg.
Connected load: 3kW, weight: 415kg, with backstop, automatic belt feed, belt detection and belt sling ejection, the conveyor belt is defective.
There are four Strapping Machines M.J. Maillis available, 2x TH-E-2, 2x TH/E, year of construction: 1x 2008, 3x 2017.
Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 5 mm polypropylene strapping Equipped with a baler Output approx. up to 36 packets/min Speed table hinges infinitely adjustable Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue
Roll-off trolley for plastic belt, light version
Suitable for steel and plastic strapping, electro-galvanized, very robust and stable design, including a shelf and brake. Suitable for steel and plastic strapping Core diameter 406 mm, belt width 9-19 mm Core diameter 406 mm, belt widths 9-19 mm
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
connection voltage: 220 VoltStrap tension: bis 550 Noutput: bis 12 St/minStrapping machine with plastic strap-with operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.
Optimax TAS200 semi auto table strapper adjustable table height, Braking swivel castors, external manual strap tension adjustment
FILM WIDTH 10 cm - 20 cm RECOMMENDED FILM THICKNESS 17μ, 23μ, 25μ PE/PVC film WORKING SPEED 10 m/min. Dimensions of the goods to be packaged: max width 95 cm height 45 cm Power supply 2.2 kW 3-phase 380/400 volts Compressed air connection 6 bar PACKAGING MACHINE FOR FURNISHINGS SUCH AS BATHROOM AND KITCHEN FURNITURE OR DOORS DOOR FRAMES OR TRIM LAMINATE FLOORS ALUMINIUM PROFILES STEEL PROFILES WOODEN PROFILES AND TUBES OF STEEL ALUMINIUM OR PLASTIC Max length infinite Min dimensions (width x height x length) 100 x 18 x 600 MM Conveyor carpet Usable length 1924 MM Total length 2000 MM Working height 915 MM Electric motor from conveyor belt 0,55 kw conveying speed 12 m/min Details of stretch film width of stretch film 200 mm Max diameter of stretch film roll D 230 mm Inner diameter of the roller core 76 mm Recommended film thickness 23/30/35 micron General te ...
Tying of cartons with maximum width 900mm and height 800mm
Dimension work table: 750 mm x 750 mm Electric
dimensions: 670 x 430 x 870 mm: 670 x 430 mmsemi-autom. working: SEMI-AUTOMATICband length preselection via POTIBand voltage manually via couplingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Soco System Model: T10 Year: 2006 Max box dimensions: height: 750mm wide:900mm LOWER GLUE HEAD IS MISSING !
2 automatic carton strapping strappers with holder - used - : Prices per device (net) from location: 1.950.-€ Manufacturer: unknown Model: unknown Year built: unknown Channel width: 85cm, Channel height: approx. 59cm Device width: approx. 62cm Device length: approx. 1.60m Height treadmill level: approx. 96cm Device height incl. holder: approx. 2,60m Bandwidth: max. 12mm Condition: good Available: from approx. Early October Location: Frankenberg Camp (Saxony)
Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW
01) -conveyor belt 8 m -Conveyor belt 2 m -Roller conveyor with self-centering and bumper -Roller conveyor with self-centering -Inshocker -Roller conveyor with manual self-centering and hidden stop system -Double roller conveyor with bumper -Automatic stacking device -Lifting system -Powered transport rollers All these components are manufactured by "Sitema" - CE 2000 02) Automatic strapping machine "Transpak" - TP 601 D -Width mm: 8-12 -Thickness mm: 0.35 - o, 65 -Inner rolls diameter mm: 200 -Total length mm: 1430 -Total width mm: 620 03) Packaging machine "Sitema" - CE 2004 -Drive: Pneumatic -Pressure bar: 6 04) Temperature Trigger Glue - "Meler" - ML-242-ST - CE 2004 05) Applicator "Robatech" - Concept 8/2B+KP 12C 06) Labeling machine "Topjet eticode 600" 07) No. ...
Mosca STF stowage clock conveyor; good condition; 1000mm length; 2 sensors; Speed adjustable. Mosca conveyor STF; good condition; lenght 1000mm; two sensors; I'm not.
2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec in ...
