other textile machines used for sale

1 MATHIS sample rotary garment dyeing and washing machine type TWA, capacity 1,5 Kg, with BECATRON dye cycle controller type DATEX MICRO, with add vessel. Machine designed to work up to boiling temperatures. This machine is in immaculate condition and has less than 3500 working hours.

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 3 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 45 L, with SEDO dye cycle controller type SEDOMAT 1800, drum rotation 4-28 rpm, machine equipped with centrifugation process of 315 rpm, 3 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc. This machine is in immaculate condition and has very few working hours.

1 THIES high temperature vertical cone / bobbin dyeing machine type iCone 1800, year 2017 (commissioned in 2018), loading capacity 765 kg in CO / PES, SEDO T858 controller,

1 IBELUS laboratory HT beaker dyeing machine, type LABIbelus 12 Infra Red, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller IBELUS type IL-720

1 MATHIS laboratory HT beaker dyeing machine, type LABOMAT BFA 12, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller MATHIS type Uniprogrammer

1 JUSA HT high temperature sample cone / bobbin dyeing machine type Jusapack Junior 6, year 1997, 6 vessels, machine can work with only 1 vessel or with maximum 6 vessels simultaneously, vessel diameter 230 mm, each vessel capacity for 5 x 6 bobbins (possible to load 6 x 6 bicopress bobbins on each vessel), sword useful height is 750 mm, maximal capacity 6 x 6 Kg = 36 Kg, possible to dye 1 or 2 bobbins only working with 1 vessel only, AREL controller type ATC304, circulation pump is inverter controlled, supplied with 6 material carriers. On this machine you can dye, always the same shade, the following capacities: 1 to 6 KG (1 tube only), 7 to 12 Kg (2 tubes), 13 to 18 Kg (3 tubes), 19 to 24 Kg (4 tubes), 25 to 30 Kg (5 tubes), 31 to 36 Kg (all 6 tubes)

1 PIMATEX ready made garment dyeing machine type MTP050, year 2005, capacity up to 50 Kg, drum diameter 120 cm, drum depth 85 cm, drum volume 960 L, drum with 3 compartments, with sampling device, with 8 add vats, equipped with AREL type ATC 304+ dye cycle controller, exterior heat exchanger and pump, machine fully LENZE and ABB inverter controlled

1 FLAINOX ready made garment dyeing machine type ARC 20, year 2000, capacity up to 20 Kg, drum diameter 84 cm, drum depth 112 cm, drum volume 620 L, equipped with TERMOELETTRONICA type CT82 dye cycle controller, liquor ratio 1:8 with partial immersion and 1:18 with total immersion, working temperature 98ºC, machine works in dyeing at 2 to 20 rpm, machine works in centrifugation at 200 rpm, inverter controlled drum

1 MÜLLER label cut and fold machine type LCFR2, year 2017

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 1280/975, year 1990, capacity 150 Kg, autoclave diameter 1280 mm, delivered with: 1 carrier with 22 swords, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 840/975, year 1998, capacity 40 Kg, autoclave diameter 840 mm, delivered with: 2 carriers with 8 swords each, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 750 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7

1 MARGASA textile waste cutting machine type CMT 600 rotary cutter, year 1996, working width 600 mm, cutting blade width 610 mm, feeding conveyor 250 cm long, exit conveyor 190 cm long, supplied with blade sharpening table and spare blade

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

1 MONTI ANTONIO continuous belt press for knitted fabric ironing/finishing, with steaming upper plate type 205

1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,

1 ALLIANCE sample high temperature jet dyeing machine, type Baby Jet, capacity 4 to 10 kg (according to the weight and composition of the fabrics), year 1996, maximum dyeing temperature 140 ºC, machine equipped with filter, TCA 200 dye cycle controller, winch is inverter controlled (OMRON), with addition vat, Machine delivered fully erected ready to connect to media (no cables and no pneumatic pipes a disconnected for the transport

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6 = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6 = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6 = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6 = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each swor ...

1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.