Key data: 4200 mm, 70 mm
Panel Saw Scheer – Automatic Panel and Veneer Saw Type: FM 9-4200 Cutting length 4200 mm Cutting height 70 mm Saw motor 5.5 kW Saw feed rate 1 – 30 m/min. Cutting width with extra stop up to 2.42 m Good condition, ready for immediate use Test run possible Weight approx. 930 kg
max. cutting length : 3000 mm max. cutting height : 45 mm Saw blade diameter : 160 mm Tension beam movement : by handwheel Movement of the saw carriage : manual Machine type : mobile Motor power : 1.8 kW
Dowel drill Scheer Dowel Hole Drill Type DB 5 Machine No. 508310 Year of manufacture 1983 Drilling of carcasses, frame joints, drawers, Door coverings, rows of holes or groups of holes Drill beam length 640 mm Spindle spacing min. 32 mm, max. 640 mm 21 pieces of spindles Drilling depth 80 mm With drills Drill beams can be swivelled pneumatically Motor power 2.2 kW Portal passage maximum width with one side stop 915 mm, with 2 side stops 770 mm 2 pneumatic hold-down devices on machine table Weight 460 kg with pallet Dimensions 1350 mm x 820 mm x H 1400 mm
Veneer joining machine Scheer Cutting length 2500 L x W x H: 3.0 x 1.2 x 1.5 m Weight 300 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Panel Saw Scheer Type: PA 7004 Year of Make: 1999 Cutting length 4200 mm with automatic lift table loading with cutting optimization software Full formats 2800 x 4200 mm and half formats 2800 x 2070 mm were processed
used
- 21-spindle drilling unit - Complete stop system - Drill Assortment
Joining saw and fine-cutting saw with joining unit and veneer stop table A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy-to-guide sawing unit, runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear side table with penetrating finger stop, adjustable from 2 - 50cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Fuernier pad made of low-wear hard plastic Drive motor 2.2kW HM-tipped fine-cut blade Joining sheet PCD-tipped Practical front veneer support Angle stop left Suction connection 80mm with adapter to 100mm Emergency stop switch CE mark O ...
You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.1.2.
CNC Machining Center Scheer Type: BC 2001 Year of construction: 2000 Axle travel: X 3500 mm, Y 1500 mm, Z 220 mm Axis speeds: X 80 m/min., Y 60 m/min., Z 30 m/min. Work table size: 3200 x 1200 mm Minimum part size: 250 mm x 70 mm x 10 mm Max. part size: 3200 mm x 1250 mm x 70 mm In pendulum mode: 800 mm x 1250 mm complete machining 1000 mm x 1250 mm surface processing Vacuum pump 2 x 40 m³/h Vacuum cups 12 pieces 120 x 120, 2 pieces 120 x 65 mm Drilling unit: L-shape, 13 individually controllable spindles, 7 in X-direction, 6 in Y-direction, 32 mm wheelbase, Extension stroke 70 mm, pneumatic Scheer male thread M 10 re+li, 1.5 kW / 6000 rpm Milling unit power 7.5 kW at 12000 to 18000 rpm, Speed 1000 rpm to 20000 rpm electr.adjustable Right-left rotation Hollow shank taper DIN 69893-HSK F63 Tool magazine on the move with 18 places Distance in magazine 88 mm Max. ...
SCHEER saw fully functional, the entire control cabinet is invested, practically new, reliable, can be cut 5 panels at a time
SPECIFICATIONS: Max. cutting length mm: 3100 Pneumatic workpiece stop Voltage: 380 volts Hand-operated saw carriage
Hand Plane MH75 SCHEER Planing width 75mm Motor: 230V 5.5A 1100W 10000 U/1 Planed sole length 500mm 2 knife shaft D= 60mm reversible knife
Machine double-sided row drilling machine 2 drill motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by moving the Bkhqffww workpiece max. 2656 mm) Portal passage 850 mm Air verbatcu at 5 atm approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Location: 97478 Hainert
Veneer saw Scheer Type: FM 5-3000 Cutting length 3000 mm Saw motor approx. 1.85 kW Pneumatic pressure beam Maximum insertion height 70 mm Saw blade diameter maximum 180 mm Maximum cutting height approx. 45 mm Support table at the back Weight approx. 450 kg Dimensions: 3600 mm x 1000 mm x H 1300 mm
Granulator Abrasion : 1,1 KW Operating voltage : 3~380 V, 50 Hz, 220 V, 1.6 A; Rotor speed : 100 - 1150 rpm Rotor diameter : 120 mm Rotor width : 50 mm Number of teeth : 20; --> 2 identical machines in stock.
In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Scheer FM2-3000 Scheer veneer saw 3000 mm G-2521-M3DVZ No VAT! Special price: 770,-
pneumatically max. cut length 3,000 mms - saw sheet Diameter 180 mms dimensions 3600 x 700 x H 1,400 mms weight 400 kg (changes and mistakes in the technical data, information and prices as well as intersales reserve!)
Scheer Type DB 5 dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction as well as for precise joints in interior design. Includes a comprehensive range of dowel drill bits., drilling spindles: 21, division: 32 mm, passage width: max. 1.000 mm, Pivot: pneumatic
cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;
Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood., cutting length: 3.000 mm, Saw blade diameter: 180 mm, engine: 2.5 hp
Cutting length: 3100mm, cutting height: 45mm, saw blade diameter: 180mm, motor power: approx. 2kW, machine dimensions X/Y/Z: approx. 3900mm/1100mm/1500mm, weight: approx. 500kg. Including pneumatic pressure beam and rear support table. On-site inspection is possible.
Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,
Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,
