Model
  • page

     1
  • Next
  • 2
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

Model
(Manufacturer:

SCHROEDER)

 
sheet metal working / Folding Machines
date: 16.11.2026
approved
dealer
item-No.: 162754919
New in: 2013 used
approved
Location: pl
Price: 37.500 €

SCHRÖDER MAK3 3000/4.0 sheet metal folding machine was built in 2013 in Germany by Hans Schröder Maschinenbau GmbH. The machine is designed for the precise folding of sheet metal with a maximum length of 3000 mm and a thickness of 4 mm. It enables repeatable bends at a specified angle, making it suitable for the production of sheet metal components with various geometries, used in many industries. The folding process involves clamping the sheet metal against the worktable using a clamping beam, then bending the protruding section with a folding beam. The mechanical drive used provides the force required to effectively fold the sheet metal along the machine’s entire working length. Operation of the machine is facilitated by the SCHRÖDER POS 2000 controller, which enables quick programming of working parameters. The SCHRÖDER MAK3 mechanical folding machine weighs 4150 kg. Tech ...

other food machines
date: 04.11.2026
approved
dealer
item-No.: 162751004
used
approved
Location: de
Price: 2.500 €

Manufacturer: Schröder & Co. Type: Scraper Surface Heat Exchanger Levels: - 2 heat settings - 1 cooling stage Condition: good, fully functional

meat and fish processing machines / Pickle injectors
date: 10.08.2026
approved
dealer
item-No.: 162750346
used
approved
Location: pl

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type of Injector / Cutter Height 1950 mm Width 1000 mm Length 2200 mm Electrical Supply: 400V 50Hz 3N Total power 4.5 kW Main Material Stainless Steel, Acid Resistant Number of needles 61 pcs. Number of heads Single head Working belt width 440 mm Belt feed adjustment Yes Injection pressure adjustment Yes Tape type made of acid-resistant steel

sheet metal working / Guillotine Shears
date: 10.11.2026
approved
dealer
item-No.: 162749999
New in: 2016 used
approved
Location: de

Offer 26209 Technical data: - Max. working width 1020 mm - Max. material thickness 2.5 mm - Cutting angle 2.4 ° - Stroke rate up to 34 1/min - Manual backgauge with digital position indicator 500 mm - Table height 850 mm - Front angle stop - Front pull-out material support - Pneumatically supported sheet metal hold-up with sheet metal removal to the front - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Mounted on steel plate - Pneumatic connection 6 bar - Drive 400 V / 3 kW - Space requirement approx. W 2100 x H 1150 x D 2200 mm - Weight approx. 1400 kg

meat and fish processing machines
date: 27.10.2026
item-No.: 162745705
New in: 2002 used
Location: pl

Used Schroder massing machine type MAX 600. Year of manufacture 2002. Acid-resistant design.

meat and fish processing machines
date: 21.10.2026
approved
dealer
item-No.: 162743932
used
approved
Location: rs

The Schröder N55 Injector is an industrial multineedle injector designed for professional food processing operations. Equipped with 55 needles and a conveyer belt system, it ensures even injection of brine, marinades or other liquids into meat products. Its stainless steel construction provides durability and hygiene, while pressure and speed controls allow precise process adjustment. Suitable for medium to large production environments requiring high throughput and consistent results. Technical specifications: Manufacturer: Schröder With transport belt Stainless steel construction 55 needles Approximate dimensions in cm: Length: 240 Width: 110 Height: 150 Control: pressure regulation and speed control Application: meat processing, injection of brine/saline into muscle products

sheet metal working / Guillotine Shears
date: 28.10.2026
approved
dealer
item-No.: 162742207
New in: 2001 used
approved
Location: de

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

sheet metal working / Guillotine Shears
date: 13.11.2026
approved
dealer
item-No.: 162739038
New in: 2017 used
approved
Location: de
Price: 13.500 €

Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg

sheet metal working / Folding Machines
date: 11.09.2026
approved
dealer
item-No.: 162738825
New in: 1999 used
approved
Location: de

Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg

sheet metal working / Folding Machines
date: 07.05.2025
item-No.: 162716000
New in: 1993 used
Location: de

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

sheet metal working / Folding Machines
date: 07.05.2025
item-No.: 162719419
New in: 2012 used
Location: de

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

sheet metal working / Guillotine Shears
date: 12.05.2025
item-No.: 162730008
New in: 1992 used
Location: de

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

sheet metal working / Folding Machines
date: 12.05.2025
item-No.: 162730009
New in: 1984 used
Location: de

Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

sheet metal working / Guillotine Shears
date: 18.06.2024
item-No.: 162699899
New in: 1995 used
Location: de

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

sheet metal working / Guillotine Shears
date: 08.05.2024
item-No.: 162702379
New in: 2011 used
Location: de

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

meat and fish processing machines
date: 25.09.2023
item-No.: 160307998
used
Location: bg

Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm

meat and fish processing machines / Pickle injectors
date: 23.04.2026
approved
dealer
item-No.: 162735392
used
approved
Location: bg

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

other food machines
date: 23.09.2021
item-No.: 157301730
used
Location: se

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

meat and fish processing machines / Pickle injectors
date: 23.04.2026
approved
dealer
item-No.: 162735031
used
approved
Location: bg

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

meat and fish processing machines / Pickle injectors
date: 23.04.2026
approved
dealer
item-No.: 162735030
used
approved
Location: bg

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

meat and fish processing machines
date: 06.10.2023
item-No.: 149335323
used
Location: bg

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

meat and fish processing machines / Pickle injectors
date: 23.04.2026
approved
dealer
item-No.: 162734900
used
approved
Location: bg

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

meat and fish processing machines / Pickle injectors
date: 23.04.2026
approved
dealer
item-No.: 162734899
used
approved
Location: bg

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

meat and fish processing machines
date: 06.10.2023
item-No.: 149307760
used
Location: bg

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

sheet metal working
date: 23.06.2025
item-No.: 162710713
New in: 2000 used
Location: de

Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.

sheet metal working / Folding Machines
date: 23.06.2025
item-No.: 162712292
New in: 2004 used

sheet width: 2540 mm plate thickness: 4 mm stroke: 250 mm total power requirement: 4 kVA weight of the machine ca.: 3720 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Hydraulic Shear
date: 23.06.2025
item-No.: 162712294
New in: 2004 used

sheet width: 2540 mm plate thickness: 5 mm no. of strokes: 32 Hub/min table height: 820 mm total power requirement: 11 kW weight of the machine ca.: 4.440 kg dimensions of the machine ca.: 3360x1400x1440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Folding Machines
date: 23.06.2025
item-No.: 162713148
New in: 2012 used

sheet width: 3020 mm plate thickness: 2,00 mm distance between columns: mm thickness - aluminium: 4,00 mm thickness at Niro-steel: 1,50 mm rear stop: 1000 upper beam stroke: 200 mm bending angle: 145 ° total power requirement: kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,30 x 2,60 x 1,90 m - Manual bending beam adjustment - Foot pedal - Total power requirement 32 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working
date: 23.06.2025
item-No.: 162718237
New in: 2010 used
Location: de

Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t.

sheet metal working
date: 23.06.2025
item-No.: 162721802
used
Location: nl

Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling  

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)